net/mlx5e: Report correct auto negotiation and allow toggling

Previous to this patch auto negotiation was reported off although it was
on by default in hardware. This patch reports the correct information to
ethtool and allows the user to toggle it on/off.

Added another parameter to set port proto function in order to pass
the auto negotiation field to the hardware.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -702,6 +702,8 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	u32 eth_proto_admin;
 	u32 eth_proto_lp;
 	u32 eth_proto_oper;
+	u8 an_disable_admin;
+	u8 an_status;
 	int err;
 
 	err = mlx5_query_port_ptys(mdev, out, sizeof(out), MLX5_PTYS_EN, 1);
@@ -712,10 +714,12 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 		goto err_query_ptys;
 	}
 
-	eth_proto_cap   = MLX5_GET(ptys_reg, out, eth_proto_capability);
-	eth_proto_admin = MLX5_GET(ptys_reg, out, eth_proto_admin);
-	eth_proto_oper  = MLX5_GET(ptys_reg, out, eth_proto_oper);
-	eth_proto_lp    = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise);
+	eth_proto_cap    = MLX5_GET(ptys_reg, out, eth_proto_capability);
+	eth_proto_admin  = MLX5_GET(ptys_reg, out, eth_proto_admin);
+	eth_proto_oper   = MLX5_GET(ptys_reg, out, eth_proto_oper);
+	eth_proto_lp     = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise);
+	an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
+	an_status        = MLX5_GET(ptys_reg, out, an_status);
 
 	ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
 	ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
@@ -729,6 +733,18 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	link_ksettings->base.port = get_connector_port(eth_proto_oper);
 	get_lp_advertising(eth_proto_lp, link_ksettings);
 
+	if (an_status == MLX5_AN_COMPLETE)
+		ethtool_link_ksettings_add_link_mode(link_ksettings,
+						     lp_advertising, Autoneg);
+
+	link_ksettings->base.autoneg = an_disable_admin ? AUTONEG_DISABLE :
+							  AUTONEG_ENABLE;
+	ethtool_link_ksettings_add_link_mode(link_ksettings, supported,
+					     Autoneg);
+	if (!an_disable_admin)
+		ethtool_link_ksettings_add_link_mode(link_ksettings,
+						     advertising, Autoneg);
+
 err_query_ptys:
 	return err;
 }
@@ -764,9 +780,14 @@ static int mlx5e_set_link_ksettings(struct net_device *netdev,
 {
 	struct mlx5e_priv *priv    = netdev_priv(netdev);
 	struct mlx5_core_dev *mdev = priv->mdev;
+	u32 eth_proto_cap, eth_proto_admin;
+	bool an_changes = false;
+	u8 an_disable_admin;
+	u8 an_disable_cap;
+	bool an_disable;
 	u32 link_modes;
+	u8 an_status;
 	u32 speed;
-	u32 eth_proto_cap, eth_proto_admin;
 	int err;
 
 	speed = link_ksettings->base.speed;
@@ -797,10 +818,17 @@ static int mlx5e_set_link_ksettings(struct net_device *netdev,
 		goto out;
 	}
 
-	if (link_modes == eth_proto_admin)
+	mlx5_query_port_autoneg(mdev, MLX5_PTYS_EN, &an_status,
+				&an_disable_cap, &an_disable_admin);
+
+	an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE;
+	an_changes = ((!an_disable && an_disable_admin) ||
+		      (an_disable && !an_disable_admin));
+
+	if (!an_changes && link_modes == eth_proto_admin)
 		goto out;
 
-	mlx5_set_port_proto(mdev, link_modes, MLX5_PTYS_EN);
+	mlx5_set_port_ptys(mdev, an_disable, link_modes, MLX5_PTYS_EN);
 	mlx5_toggle_port_link(mdev);
 
 out:

drivers/net/ethernet/mellanox/mlx5/core/port.c

@@ -202,15 +202,24 @@ int mlx5_query_port_proto_oper(struct mlx5_core_dev *dev,
 }
 EXPORT_SYMBOL_GPL(mlx5_query_port_proto_oper);
 
-int mlx5_set_port_proto(struct mlx5_core_dev *dev, u32 proto_admin,
-			int proto_mask)
+int mlx5_set_port_ptys(struct mlx5_core_dev *dev, bool an_disable,
+		       u32 proto_admin, int proto_mask)
 {
-	u32 in[MLX5_ST_SZ_DW(ptys_reg)];
 	u32 out[MLX5_ST_SZ_DW(ptys_reg)];
+	u32 in[MLX5_ST_SZ_DW(ptys_reg)];
+	u8 an_disable_admin;
+	u8 an_disable_cap;
+	u8 an_status;
+
+	mlx5_query_port_autoneg(dev, proto_mask, &an_status,
+				&an_disable_cap, &an_disable_admin);
+	if (!an_disable_cap && an_disable)
+		return -EPERM;
 
 	memset(in, 0, sizeof(in));
 
 	MLX5_SET(ptys_reg, in, local_port, 1);
+	MLX5_SET(ptys_reg, in, an_disable_admin, an_disable);
 	MLX5_SET(ptys_reg, in, proto_mask, proto_mask);
 	if (proto_mask == MLX5_PTYS_EN)
 		MLX5_SET(ptys_reg, in, eth_proto_admin, proto_admin);
@@ -220,7 +229,7 @@ int mlx5_set_port_proto(struct mlx5_core_dev *dev, u32 proto_admin,
 	return mlx5_core_access_reg(dev, in, sizeof(in), out,
 				    sizeof(out), MLX5_REG_PTYS, 0, 1);
 }
-EXPORT_SYMBOL_GPL(mlx5_set_port_proto);
+EXPORT_SYMBOL_GPL(mlx5_set_port_ptys);
 
 /* This function should be used after setting a port register only */
 void mlx5_toggle_port_link(struct mlx5_core_dev *dev)
@@ -530,6 +539,25 @@ int mlx5_query_port_pfc(struct mlx5_core_dev *dev, u8 *pfc_en_tx, u8 *pfc_en_rx)
 }
 EXPORT_SYMBOL_GPL(mlx5_query_port_pfc);
 
+void mlx5_query_port_autoneg(struct mlx5_core_dev *dev, int proto_mask,
+			     u8 *an_status,
+			     u8 *an_disable_cap, u8 *an_disable_admin)
+{
+	u32 out[MLX5_ST_SZ_DW(ptys_reg)];
+
+	*an_status = 0;
+	*an_disable_cap = 0;
+	*an_disable_admin = 0;
+
+	if (mlx5_query_port_ptys(dev, out, sizeof(out), proto_mask, 1))
+		return;
+
+	*an_status = MLX5_GET(ptys_reg, out, an_status);
+	*an_disable_cap = MLX5_GET(ptys_reg, out, an_disable_cap);
+	*an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
+}
+EXPORT_SYMBOL_GPL(mlx5_query_port_autoneg);
+
 int mlx5_max_tc(struct mlx5_core_dev *mdev)
 {
 	u8 num_tc = MLX5_CAP_GEN(mdev, max_tc) ? : 8;

include/linux/mlx5/port.h

@@ -47,6 +47,14 @@ enum mlx5_module_id {
 	MLX5_MODULE_ID_QSFP28           = 0x11,
 };
 
+enum mlx5_an_status {
+	MLX5_AN_UNAVAILABLE = 0,
+	MLX5_AN_COMPLETE    = 1,
+	MLX5_AN_FAILED      = 2,
+	MLX5_AN_LINK_UP     = 3,
+	MLX5_AN_LINK_DOWN   = 4,
+};
+
 #define MLX5_EEPROM_MAX_BYTES			32
 #define MLX5_EEPROM_IDENTIFIER_BYTE_MASK	0x000000ff
 #define MLX5_I2C_ADDR_LOW		0x50
@@ -65,14 +73,17 @@ int mlx5_query_port_link_width_oper(struct mlx5_core_dev *dev,
 int mlx5_query_port_proto_oper(struct mlx5_core_dev *dev,
 			       u8 *proto_oper, int proto_mask,
 			       u8 local_port);
-int mlx5_set_port_proto(struct mlx5_core_dev *dev, u32 proto_admin,
-			int proto_mask);
+int mlx5_set_port_ptys(struct mlx5_core_dev *dev, bool an_disable,
+		       u32 proto_admin, int proto_mask);
 void mlx5_toggle_port_link(struct mlx5_core_dev *dev);
 int mlx5_set_port_admin_status(struct mlx5_core_dev *dev,
 			       enum mlx5_port_status status);
 int mlx5_query_port_admin_status(struct mlx5_core_dev *dev,
 				 enum mlx5_port_status *status);
 int mlx5_set_port_beacon(struct mlx5_core_dev *dev, u16 beacon_duration);
+void mlx5_query_port_autoneg(struct mlx5_core_dev *dev, int proto_mask,
+			     u8 *an_status,
+			     u8 *an_disable_cap, u8 *an_disable_admin);
 
 int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port);
 void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, u16 *max_mtu, u8 port);