ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown

Make sure RTC-interrupts are disabled at shutdown.

As the RTC is generally powered by backup power (VDDBU), its interrupts
are not disabled on wake-up, user, watchdog or software reset.  This
could cause troubles on other systems (e.g.  older kernels) if an
interrupt occurs before a handler has been installed at next boot.

Let us be well-behaved and disable them on clean shutdowns at least (as
do the RTT-based rtc-at91sam9 driver).
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-at91rm9200.c

@@ -428,6 +428,14 @@ static int __exit at91_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void at91_rtc_shutdown(struct platform_device *pdev)
+{
+	/* Disable all interrupts */
+	at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+					AT91_RTC_CALEV);
+}
+
 #ifdef CONFIG_PM_SLEEP
 
 /* AT91RM9200 RTC Power management control */
@@ -466,6 +474,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
 
 static struct platform_driver at91_rtc_driver = {
 	.remove		= __exit_p(at91_rtc_remove),
+	.shutdown	= at91_rtc_shutdown,
 	.driver		= {
 		.name	= "at91_rtc",
 		.owner	= THIS_MODULE,