Select VIRT_TO_BUS directly where needed

In commit 887cbce0 ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/Kconfig

@@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	bool
 
-config HAVE_VIRT_TO_BUS
-	bool
-	help
-	  An architecture should select this if it implements the
-	  deprecated interface virt_to_bus().  All new architectures
-	  should probably not select this.
-
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
 	help

arch/alpha/Kconfig

@@ -9,7 +9,7 @@ config ALPHA
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW

arch/arm/Kconfig

@@ -49,7 +49,7 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB

arch/avr32/Kconfig

@@ -7,7 +7,7 @@ config AVR32
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_ATOMIC64
 	select HARDIRQS_SW_RESEND

arch/blackfin/Kconfig

@@ -33,7 +33,7 @@ config BLACKFIN
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64

arch/cris/Kconfig

@@ -43,7 +43,7 @@ config CRIS
 	select GENERIC_ATOMIC64
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IOMAP

arch/frv/Kconfig

@@ -6,7 +6,7 @@ config FRV
 	select HAVE_PERF_EVENTS
 	select HAVE_UID16
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG

arch/h8300/Kconfig

@@ -5,7 +5,7 @@ config H8300
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES

arch/ia64/Kconfig

@@ -26,7 +26,7 @@ config IA64
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP

arch/m32r/Kconfig

@@ -10,7 +10,7 @@ config M32R
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64

arch/m68k/Kconfig

@@ -8,7 +8,7 @@ config M68K
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
 	select GENERIC_STRNCPY_FROM_USER if MMU

arch/microblaze/Kconfig

@@ -19,7 +19,7 @@ config MICROBLAZE
 	select HAVE_DEBUG_KMEMLEAK
 	select IRQ_DOMAIN
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP

arch/mips/Kconfig

@@ -38,7 +38,7 @@ config MIPS
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
 	select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select MODULES_USE_ELF_REL if MODULES
 	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select CLONE_BACKWARDS

arch/mn10300/Kconfig

@@ -8,7 +8,7 @@ config MN10300
 	select HAVE_ARCH_KGDB
 	select GENERIC_ATOMIC64
 	select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_CLOCKEVENTS
 	select MODULES_USE_ELF_RELA
 	select OLD_SIGSUSPEND3

arch/openrisc/Kconfig

@@ -12,7 +12,7 @@ config OPENRISC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
         select HAVE_ARCH_TRACEHOOK
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

arch/parisc/Kconfig

@@ -21,7 +21,7 @@ config PARISC
 	select GENERIC_STRNCPY_FROM_USER
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c

arch/powerpc/Kconfig

@@ -98,7 +98,7 @@ config PPC
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select SYSCTL_EXCEPTION_TRACE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select HAVE_VIRT_TO_BUS if !PPC64
+	select VIRT_TO_BUS if !PPC64
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS

arch/s390/Kconfig

@@ -134,7 +134,7 @@ config S390
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_UID16 if 32BIT
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select INIT_ALL_POSSIBLE
 	select KTIME_SCALAR if 32BIT
 	select MODULES_USE_ELF_RELA

arch/score/Kconfig

@@ -12,7 +12,7 @@ config SCORE
        select GENERIC_CPU_DEVICES
        select GENERIC_CLOCKEVENTS
        select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select MODULES_USE_ELF_REL
 	select CLONE_BACKWARDS
 

arch/tile/Kconfig

@@ -17,7 +17,7 @@ config TILE
 	select GENERIC_IRQ_SHOW
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_SYSCALL_WRAPPERS if TILEGX
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CLOCKEVENTS

arch/unicore32/Kconfig

@@ -9,7 +9,7 @@ config UNICORE32
 	select GENERIC_ATOMIC64
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IRQ_PROBE

arch/x86/Kconfig

@@ -112,7 +112,7 @@ config X86
 	select GENERIC_STRNLEN_USER
 	select HAVE_CONTEXT_TRACKING if X86_64
 	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select MODULES_USE_ELF_REL if X86_32
 	select MODULES_USE_ELF_RELA if X86_64
 	select CLONE_BACKWARDS if X86_32

arch/xtensa/Kconfig

@@ -9,7 +9,7 @@ config XTENSA
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select MODULES_USE_ELF_RELA

mm/Kconfig

@@ -286,8 +286,12 @@ config NR_QUICK
 	default "1"
 
 config VIRT_TO_BUS
-	def_bool y
-	depends on HAVE_VIRT_TO_BUS
+	bool
+	help
+	  An architecture should select this if it implements the
+	  deprecated interface virt_to_bus().  All new architectures
+	  should probably not select this.
+
 
 config MMU_NOTIFIER
 	bool