[SCSI] qla4xxx: Temperature monitoring for ISP82XX core.

During watchdog, need to monitor temperature of ISP82XX core
and set device state to FAILED when temperature reaches
"Panic" level.
Signed-off-by: NMike Hernandez <michael.hernandez@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla4xxx/ql4_def.h

@@ -671,6 +671,7 @@ struct scsi_qla_host {
 	uint16_t pri_ddb_idx;
 	uint16_t sec_ddb_idx;
 	int is_reset;
+	uint16_t temperature;
 };
 
 struct ql4_task_data {

drivers/scsi/qla4xxx/ql4_nx.h

@@ -19,12 +19,25 @@
 #define PHAN_PEG_RCV_INITIALIZED	0xff01
 
 /*CRB_RELATED*/
-#define QLA82XX_CRB_BASE	QLA82XX_CAM_RAM(0x200)
-#define QLA82XX_REG(X)		(QLA82XX_CRB_BASE+(X))
-
+#define QLA82XX_CRB_BASE		(QLA82XX_CAM_RAM(0x200))
+#define QLA82XX_REG(X)			(QLA82XX_CRB_BASE+(X))
 #define CRB_CMDPEG_STATE		QLA82XX_REG(0x50)
 #define CRB_RCVPEG_STATE		QLA82XX_REG(0x13c)
 #define CRB_DMA_SHIFT			QLA82XX_REG(0xcc)
+#define CRB_TEMP_STATE			QLA82XX_REG(0x1b4)
+
+#define qla82xx_get_temp_val(x)		((x) >> 16)
+#define qla82xx_get_temp_state(x)	((x) & 0xffff)
+#define qla82xx_encode_temp(val, state)	(((val) << 16) | (state))
+
+/*
+ * Temperature control.
+ */
+enum {
+	QLA82XX_TEMP_NORMAL = 0x1,	/* Normal operating range */
+	QLA82XX_TEMP_WARN,	/* Sound alert, temperature getting high */
+	QLA82XX_TEMP_PANIC	/* Fatal error, hardware has shut down. */
+};
 
 #define QLA82XX_HW_H0_CH_HUB_ADR	0x05
 #define QLA82XX_HW_H1_CH_HUB_ADR	0x0E

drivers/scsi/qla4xxx/ql4_os.c

@@ -1971,6 +1971,42 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
 	return QLA_ERROR;
 }
 
+/**
+ * qla4_8xxx_check_temp - Check the ISP82XX temperature.
+ * @ha: adapter block pointer.
+ *
+ * Note: The caller should not hold the idc lock.
+ **/
+static int qla4_8xxx_check_temp(struct scsi_qla_host *ha)
+{
+	uint32_t temp, temp_state, temp_val;
+	int status = QLA_SUCCESS;
+
+	temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE);
+
+	temp_state = qla82xx_get_temp_state(temp);
+	temp_val = qla82xx_get_temp_val(temp);
+
+	if (temp_state == QLA82XX_TEMP_PANIC) {
+		ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C"
+			   " exceeds maximum allowed. Hardware has been shut"
+			   " down.\n", temp_val);
+		status = QLA_ERROR;
+	} else if (temp_state == QLA82XX_TEMP_WARN) {
+		if (ha->temperature == QLA82XX_TEMP_NORMAL)
+			ql4_printk(KERN_WARNING, ha, "Device temperature %d"
+				   " degrees C exceeds operating range."
+				   " Immediate action needed.\n", temp_val);
+	} else {
+		if (ha->temperature == QLA82XX_TEMP_WARN)
+			ql4_printk(KERN_INFO, ha, "Device temperature is"
+				   " now %d degrees C in normal range.\n",
+				   temp_val);
+	}
+	ha->temperature = temp_state;
+	return status;
+}
+
 /**
  * qla4_8xxx_check_fw_alive  - Check firmware health
  * @ha: Pointer to host adapter structure.
@@ -2042,7 +2078,11 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
 	    test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
 	    test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) {
 		dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-		if (dev_state == QLA82XX_DEV_NEED_RESET &&
+
+		if (qla4_8xxx_check_temp(ha)) {
+			set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
+			qla4xxx_wake_dpc(ha);
+		} else if (dev_state == QLA82XX_DEV_NEED_RESET &&
 		    !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
 			if (!ql4xdontresethba) {
 				ql4_printk(KERN_INFO, ha, "%s: HW State: "