提交 4f5cab96 编写于 作者: M Max Filippov 提交者: John W. Linville

p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanup

p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL.
This resulted in frequent 'WR_READY timeout' on beacon resubmission.

Also don't free skb on error path, as it gets freed on p54spi_wq_tx.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 684d6b36
...@@ -179,6 +179,25 @@ static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits) ...@@ -179,6 +179,25 @@ static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
return 0; return 0;
} }
static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
const void *buf, size_t len)
{
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
cpu_to_le32(HOST_ALLOWED)) == 0) {
dev_err(&priv->spi->dev, "spi_write_dma not allowed "
"to DMA write.");
return -EAGAIN;
}
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
return 0;
}
static int p54spi_request_firmware(struct ieee80211_hw *dev) static int p54spi_request_firmware(struct ieee80211_hw *dev)
{ {
struct p54s_priv *priv = dev->priv; struct p54s_priv *priv = dev->priv;
...@@ -254,24 +273,11 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev) ...@@ -254,24 +273,11 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
while (fw_len > 0) { while (fw_len > 0) {
_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, err = p54spi_spi_write_dma(priv, cpu_to_le32(
cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); ISL38XX_DEV_FIRMWARE_ADDR + offset),
(fw + offset), _fw_len);
if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, if (err < 0)
cpu_to_le32(HOST_ALLOWED)) == 0) {
dev_err(&priv->spi->dev, "fw_upload not allowed "
"to DMA write.");
err = -EAGAIN;
goto out; goto out;
}
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN,
cpu_to_le16(_fw_len));
p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, cpu_to_le32(
ISL38XX_DEV_FIRMWARE_ADDR + offset));
p54spi_spi_write(priv, SPI_ADRS_DMA_DATA,
(fw + offset), _fw_len);
fw_len -= _fw_len; fw_len -= _fw_len;
offset += _fw_len; offset += _fw_len;
...@@ -418,27 +424,21 @@ static irqreturn_t p54spi_interrupt(int irq, void *config) ...@@ -418,27 +424,21 @@ static irqreturn_t p54spi_interrupt(int irq, void *config)
static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
{ {
struct p54_hdr *hdr = (struct p54_hdr *) skb->data; struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
struct p54s_dma_regs dma_regs;
unsigned long timeout; unsigned long timeout;
int ret = 0; int ret = 0;
u32 ints; u32 ints;
p54spi_wakeup(priv); p54spi_wakeup(priv);
dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE); ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
dma_regs.len = cpu_to_le16(skb->len); if (ret < 0)
dma_regs.addr = hdr->req_id; goto out;
p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
sizeof(dma_regs));
p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len);
timeout = jiffies + 2 * HZ; timeout = jiffies + 2 * HZ;
ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
while (!(ints & SPI_HOST_INT_WR_READY)) { while (!(ints & SPI_HOST_INT_WR_READY)) {
if (time_after(jiffies, timeout)) { if (time_after(jiffies, timeout)) {
dev_err(&priv->spi->dev, "WR_READY timeout"); dev_err(&priv->spi->dev, "WR_READY timeout\n");
ret = -1; ret = -1;
goto out; goto out;
} }
...@@ -448,9 +448,9 @@ static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) ...@@ -448,9 +448,9 @@ static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
p54spi_sleep(priv); p54spi_sleep(priv);
out:
if (FREE_AFTER_TX(skb)) if (FREE_AFTER_TX(skb))
p54_free_skb(priv->hw, skb); p54_free_skb(priv->hw, skb);
out:
return ret; return ret;
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册