x86: fix panic with interrupts off (needed for MCE)

For some time each panic() called with interrupts disabled
triggered the !irqs_disabled() WARN_ON in smp_call_function(),
producing ugly backtraces and confusing users.

This is a common situation with machine checks for example which
tend to call panic with interrupts disabled, but will also hit
in other situations e.g. panic during early boot.  In fact it
means that panic cannot be called in many circumstances, which
would be bad.

This all started with the new fancy queued smp_call_function,
which is then used by the shutdown path to shut down the other
CPUs.

On closer examination it turned out that the fancy RCU
smp_call_function() does lots of things not suitable in a panic
situation anyways, like allocating memory and relying on complex
system state.

I originally tried to patch this over by checking for panic
there, but it was quite complicated and the original patch
was also not very popular.  This also didn't fix some of the
underlying complexity problems.

The new code in post 2.6.29 tries to patch around this by
checking for oops_in_progress, but that is not enough to make
this fully safe and I don't think that's a real solution
because panic has to be reliable.

So instead use an own vector to reboot.  This makes the reboot
code extremly straight forward, which is definitely a big plus
in a panic situation where it is important to avoid relying on
too much kernel state.  The new simple code is also safe to be
called from interupts off region because it is very very simple.

There can be situations where it is important that panic
is reliable.  For example on a fatal machine check the panic
is needed to get the system up again and running as quickly
as possible.  So it's important that panic is reliable and
all function it calls simple.

This is why I came up with this simple vector scheme.
It's very hard to beat in simplicity.  Vectors are not
particularly precious anymore since all big systems are
using per CPU vectors.

Another possibility would have been to use an NMI similar
to kdump, but there is still the problem that NMIs don't
work reliably on some systems due to BIOS issues.  NMIs
would have been able to stop CPUs running with interrupts
off too.  In the sake of universal reliability I opted for
using a non NMI vector for now.

I put the reboot vector into the highest priority bucket of
the APIC vectors and moved the 64bit UV_BAU message down
instead into the next lower priority.

[ Impact: bug fix, fixes an old regression ]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

arch/x86/include/asm/entry_arch.h

@@ -14,6 +14,7 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
 BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR)
 
 BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
 		 smp_invalidate_interrupt)

arch/x86/include/asm/hw_irq.h

@@ -45,6 +45,7 @@ extern void invalidate_interrupt6(void);
 extern void invalidate_interrupt7(void);
 
 extern void irq_move_cleanup_interrupt(void);
+extern void reboot_interrupt(void);
 extern void threshold_interrupt(void);
 
 extern void call_function_interrupt(void);

arch/x86/include/asm/irq_vectors.h

@@ -88,12 +88,7 @@
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
 #define THRESHOLD_APIC_VECTOR		0xf9
-
-#ifdef CONFIG_X86_32
-/* 0xf8 : free */
-#else
-# define UV_BAU_MESSAGE			0xf8
-#endif
+#define REBOOT_VECTOR			0xf8
 
 /* f0-f7 used for spreading out TLB flushes: */
 #define INVALIDATE_TLB_VECTOR_END	0xf7
@@ -117,6 +112,8 @@
  */
 #define GENERIC_INTERRUPT_VECTOR	0xed
 
+#define UV_BAU_MESSAGE			0xec
+
 /*
  * Self IPI vector for machine checks
  */

arch/x86/kernel/entry_64.S

@@ -976,6 +976,8 @@ END(\sym)
 #ifdef CONFIG_SMP
 apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
 	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+apicinterrupt REBOOT_VECTOR \
+	reboot_interrupt smp_reboot_interrupt
 #endif
 
 #ifdef CONFIG_X86_UV

arch/x86/kernel/irqinit.c

@@ -173,6 +173,9 @@ static void __init smp_intr_init(void)
 	/* Low priority IPI to cleanup after moving an irq */
 	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 	set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+
+	/* IPI used for rebooting/stopping */
+	alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
 #endif
 #endif /* CONFIG_SMP */
 }

arch/x86/kernel/smp.c

@@ -150,14 +150,40 @@ void native_send_call_func_ipi(const struct cpumask *mask)
  * this function calls the 'stop' function on all other CPUs in the system.
  */
 
+asmlinkage void smp_reboot_interrupt(void)
+{
+	ack_APIC_irq();
+	irq_enter();
+	stop_this_cpu(NULL);
+	irq_exit();
+}
+
 static void native_smp_send_stop(void)
 {
 	unsigned long flags;
+	unsigned long wait;
 
 	if (reboot_force)
 		return;
 
-	smp_call_function(stop_this_cpu, NULL, 0);
+	/*
+	 * Use an own vector here because smp_call_function
+	 * does lots of things not suitable in a panic situation.
+	 * On most systems we could also use an NMI here,
+	 * but there are a few systems around where NMI
+	 * is problematic so stay with an non NMI for now
+	 * (this implies we cannot stop CPUs spinning with irq off
+	 * currently)
+	 */
+	if (num_online_cpus() > 1) {
+		apic->send_IPI_allbutself(REBOOT_VECTOR);
+
+		/* Don't wait longer than a second */
+		wait = USEC_PER_SEC;
+		while (num_online_cpus() > 1 && wait--)
+			udelay(1);
+	}
+
 	local_irq_save(flags);
 	disable_local_APIC();
 	local_irq_restore(flags);