Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 4d8880a0 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 

Pull devicetree updates from Rob Herring:
 - Add new documents with guidelines for DT binding stability and review
   process.  This is one of the outcomes of Kernel Summit DT discussions
 - Remove a bunch of device_type usage which is only for OF and
   deprecated with FDT
 - Fix a long standing issue with compatible string match ordering
 - Various minor binding documentation updates

* tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: add rockchip vendor prefix
  serial: vt8500: Add missing binding document for arch-vt8500 serial driver.
  dt/bindings: submitting patches and ABI documents
  DT: Add vendor prefix for Emerging Display Technologies
  of: add vendor prefixe for EPFL
  of: add vendor prefix for Gumstix
  of: add vendor prefix for Ka-Ro electronics GmbH
  devicetree: macb: Document clock properties
  dts: bindings: trivial clock bindings doc fixes
  of: Fix __of_device_is_available check
  dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc
  dt/bindings: remove device_type "network" references
  dt/bindings: remove users of device_type "mdio"
  dt/bindings: Remove references to linux,phandle properties
  dt/bindings: Remove all references to device_type "ethernet-phy"
  of: irq: Ignore disabled intc's when searching map
  of: irq: Ignore disabled interrupt controllers
  OF: base: match each node compatible against all given matches first
  dt-bindings: add GIC-400 binding
上级 8e585a6c e48ca29d
展开全部 隐藏空白更改
内联 并排
Showing with 163 addition and 231 deletion
Documentation/devicetree/bindings/ABI.txt 0 → 100644
浏览文件 @ 4d8880a0
Devicetree (DT) ABI
I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
summary document:
"That still leaves the question of, what does a stable binding look
like? Certainly a stable binding means that a newer kernel will not
break on an older device tree, but that doesn't mean the binding is
frozen for all time. Grant said there are ways to change bindings that
don't result in breakage. For instance, if a new property is added,
then default to the previous behaviour if it is missing. If a binding
truly needs an incompatible change, then change the compatible string
at the same time. The driver can bind against both the old and the
new. These guidelines aren't new, but they desperately need to be
documented."
II. General binding rules
1) Maintainers, don't let perfect be the enemy of good. Don't hold up a
binding because it isn't perfect.
2) Use specific compatible strings so that if we need to add a feature (DMA)
in the future, we can create a new compatible string. See I.
3) Bindings can be augmented, but the driver shouldn't break when given
the old binding. ie. add additional properties, but don't change the
meaning of an existing property. For drivers, default to the original
behaviour when a newly added property is missing.
4) Don't submit bindings for staging or unstable. That will be decided by
the devicetree maintainers *after* discussion on the mailinglist.
III. Notes
1) This document is intended as a general familiarization with the process as
decided at the 2013 Kernel Summit. When in doubt, the current word of the
devicetree maintainers overrules this document. In that situation, a patch
updating this document would be appreciated.
Documentation/devicetree/bindings/arm/gic.txt
浏览文件 @ 4d8880a0
......@@ -11,6 +11,7 @@ have PPIs or SGIs.
Main node required properties:
- compatible : should be one of:
"arm,gic-400"
"arm,cortex-a15-gic"
"arm,cortex-a9-gic"
"arm,cortex-a7-gic"
......
Documentation/devicetree/bindings/clock/clock-bindings.txt
浏览文件 @ 4d8880a0
......@@ -5,7 +5,7 @@ Sources of clock signal can be represented by any node in the device
tree. Those nodes are designated as clock providers. Clock consumer
nodes use a phandle and clock specifier pair to connect clock provider
outputs to clock inputs. Similar to the gpio specifiers, a clock
specifier is an array of one more more cells identifying the clock
specifier is an array of zero, one or more cells identifying the clock
output on a device. The length of a clock specifier is defined by the
value of a #clock-cells property in the clock provider node.
......
Documentation/devicetree/bindings/marvell.txt
浏览文件 @ 4d8880a0
......@@ -79,7 +79,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Required properties:
- #address-cells : Should be <1>
- #size-cells : Should be <0>
- device_type : Should be "mdio"
- compatible : Should be "marvell,mv64360-mdio"
Example:
......@@ -87,7 +86,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
mdio {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64360-mdio";
ethernet-phy@0 {
......@@ -132,7 +130,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Ethernet port node
Required properties:
- device_type : Should be "network".
- compatible : Should be "marvell,mv64360-eth".
- reg : Should be <0>, <1>, or <2>, according to which registers
within the silicon block the device uses.
......@@ -145,7 +142,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery Ethernet port node:
ethernet@0 {
device_type = "network";
compatible = "marvell,mv64360-eth";
reg = <0>;
interrupts = <32>;
......@@ -159,7 +155,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
c) Marvell Discovery PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a> where a is the interrupt number for this phy.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
......@@ -167,7 +162,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery PHY node:
ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
......@@ -271,7 +265,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
serial port.
Required properties:
- device_type : "serial"
- compatible : "marvell,mv64360-mpsc"
- reg : Offset and length of the register set for this device
- sdma : the phandle for the SDMA node used by this port
......@@ -288,7 +281,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery MPSCINTR node:
mpsc@8000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
......
Documentation/devicetree/bindings/net/macb.txt
浏览文件 @ 4d8880a0
......@@ -10,6 +10,10 @@ Required properties:
- interrupts: Should contain macb interrupt
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
- clock-names: Tuple listing input clock names.
Required elements: 'pclk', 'hclk'
Optional elements: 'tx_clk'
- clocks: Phandles to input clocks.
Optional properties:
- local-mac-address: 6 bytes, mac address
......@@ -22,4 +26,6 @@ Examples:
interrupts = <21>;
phy-mode = "rmii";
local-mac-address = [3a 0e 03 04 05 06];
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
};
Documentation/devicetree/bindings/net/marvell-orion-net.txt
浏览文件 @ 4d8880a0
......@@ -32,7 +32,6 @@ Optional controller properties:
* Ethernet port node
Required port properties:
- device_type: shall be "network".
- compatible: shall be one of "marvell,orion-eth-port",
"marvell,kirkwood-eth-port".
- reg: port number relative to ethernet controller, shall be 0, 1, or 2.
......@@ -61,7 +60,6 @@ or
mdio-bus {
...
ethphy: ethernet-phy@8 {
device_type = "ethernet-phy";
...
};
};
......@@ -75,7 +73,6 @@ eth: ethernet-controller@72000 {
marvell,tx-checksum-limit = <1600>;
ethernet@0 {
device_type = "network";
compatible = "marvell,orion-eth-port";
reg = <0>;
interrupts = <29>;
......
Documentation/devicetree/bindings/net/phy.txt
浏览文件 @ 4d8880a0
......@@ -2,7 +2,6 @@ PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
......@@ -11,8 +10,6 @@ Required properties:
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
- linux,phandle : phandle for this node; likely referenced by an
ethernet controller node.
Optional Properties:
......@@ -27,9 +24,7 @@ Example:
ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
linux,phandle = <2452000>;
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
浏览文件 @ 4d8880a0
......@@ -10,7 +10,6 @@ Currently defined compatibles:
Example:
ethernet@11300 {
device_type = "network";
compatible = "fsl,mpc8272-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11300 20 8400 100 11390 1>;
......@@ -33,7 +32,6 @@ fsl,mdc-pin : pin of port C controlling mdio clock
Example:
mdio@10d40 {
device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
......
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt
浏览文件 @ 4d8880a0
* Pin configuration nodes
Required properties:
- linux,phandle : phandle of this node; likely referenced by a QE
device.
- pio-map : array of pin configurations. Each pin is defined by 6
integers. The six numbers are respectively: port, pin, dir,
open_drain, assignment, has_irq.
......@@ -29,7 +27,6 @@ Required properties:
Example:
ucc_pin@01 {
linux,phandle = <140001>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
......
Documentation/devicetree/bindings/serial/vt8500-uart.txt 0 → 100644
浏览文件 @ 4d8880a0
* VIA VT8500 and WonderMedia WM8xxx UART Controller
Required properties:
- compatible: should be "via,vt8500-uart"
- reg: base physical address of the controller and length of memory mapped
region.
- interrupts: hardware interrupt number
- clocks: shall be the input parent clock phandle for the clock. This should
be the 24Mhz reference clock.
Aliases may be defined to ensure the correct ordering of the uarts.
Example:
aliases {
serial0 = &uart0;
};
uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
};
Documentation/devicetree/bindings/submitting-patches.txt 0 → 100644
浏览文件 @ 4d8880a0
Submitting devicetree (DT) binding patches
I. For patch submitters
0) Normal patch submission rules from Documentation/SubmittingPatches
applies.
1) The Documentation/ portion of the patch should be a separate patch.
2) Submit the entire series to the devicetree mailinglist at
devicetree@vger.kernel.org
II. For kernel maintainers
1) If you aren't comfortable reviewing a given binding, reply to it and ask
the devicetree maintainers for guidance. This will help them prioritize
which ones to review and which ones are ok to let go.
2) For driver (not subsystem) bindings: If you are comfortable with the
binding, and it hasn't received an Acked-by from the devicetree
maintainers after a few weeks, go ahead and take it.
Subsystem bindings (anything affecting more than a single device)
then getting a devicetree maintainer to review it is required.
3) For a series going though multiple trees, the binding patch should be
kept with the driver using the binding.
III. Notes
0) Please see ...bindings/ABI.txt for details regarding devicetree ABI.
1) This document is intended as a general familiarization with the process as
decided at the 2013 Kernel Summit. When in doubt, the current word of the
devicetree maintainers overrules this document. In that situation, a patch
updating this document would be appreciated.
Documentation/devicetree/bindings/vendor-prefixes.txt
浏览文件 @ 4d8880a0
......@@ -27,13 +27,16 @@ cortina Cortina Systems, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
edt Emerging Display Technologies
emmicro EM Microelectronic
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gmt Global Mixed-mode Technology, Inc.
gumstix Gumstix, Inc.
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
hp Hewlett Packard
......@@ -42,6 +45,7 @@ idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
isl Intersil
karo Ka-Ro electronics GmbH
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
......@@ -64,6 +68,7 @@ ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sbs Smart Battery System
schindler Schindler
......
Documentation/devicetree/booting-without-of.txt
浏览文件 @ 4d8880a0
......@@ -1364,19 +1364,16 @@ Appendix A - Sample SOC node for MPC8540
phy0: ethernet-phy@0 {
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <7 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
};
......
arch/arm/boot/dts/dove.dtsi
浏览文件 @ 4d8880a0
......@@ -296,7 +296,6 @@
status = "disabled";
ethernet-port@0 {
device_type = "network";
compatible = "marvell,orion-eth-port";
reg = <0>;
interrupts = <29>;
......@@ -316,7 +315,6 @@
status = "disabled";
ethphy: ethernet-phy {
device_type = "ethernet-phy";
/* set phy address in board file */
};
};
......
arch/arm/boot/dts/kirkwood-cloudbox.dts
浏览文件 @ 4d8880a0
......@@ -94,7 +94,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-db.dtsi
浏览文件 @ 4d8880a0
......@@ -84,7 +84,6 @@
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
......
arch/arm/boot/dts/kirkwood-dnskw.dtsi
浏览文件 @ 4d8880a0
......@@ -224,7 +224,6 @@
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
......
arch/arm/boot/dts/kirkwood-dockstar.dts
浏览文件 @ 4d8880a0
......@@ -95,7 +95,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1116";
reg = <0>;
};
......
arch/arm/boot/dts/kirkwood-dreamplug.dts
浏览文件 @ 4d8880a0
......@@ -104,12 +104,10 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};
......
arch/arm/boot/dts/kirkwood-goflexnet.dts
浏览文件 @ 4d8880a0
......@@ -176,7 +176,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
浏览文件 @ 4d8880a0
......@@ -101,13 +101,11 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <1>;
};
......
arch/arm/boot/dts/kirkwood-ib62x0.dts
浏览文件 @ 4d8880a0
......@@ -133,7 +133,6 @@
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
......
arch/arm/boot/dts/kirkwood-iconnect.dts
浏览文件 @ 4d8880a0
......@@ -183,7 +183,6 @@
status = "okay";
ethphy0: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
......
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
浏览文件 @ 4d8880a0
......@@ -200,7 +200,6 @@
status = "okay";
ethphy1: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
......
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
浏览文件 @ 4d8880a0
......@@ -55,7 +55,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-lsxl.dtsi
浏览文件 @ 4d8880a0
......@@ -212,12 +212,10 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
......
arch/arm/boot/dts/kirkwood-mplcec4.dts
浏览文件 @ 4d8880a0
......@@ -197,12 +197,10 @@
status = "okay";
ethphy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
ethphy1: ethernet-phy@2 {
device_type = "ethernet-phy";
reg = <2>;
};
};
......
arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
浏览文件 @ 4d8880a0
......@@ -242,7 +242,6 @@
status = "okay";
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
浏览文件 @ 4d8880a0
......@@ -89,7 +89,6 @@
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
......
arch/arm/boot/dts/kirkwood-openblocks_a6.dts
浏览文件 @ 4d8880a0
......@@ -171,7 +171,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-openblocks_a7.dts
浏览文件 @ 4d8880a0
......@@ -196,12 +196,10 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};
......
arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
浏览文件 @ 4d8880a0
......@@ -96,7 +96,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-topkick.dts
浏览文件 @ 4d8880a0
......@@ -208,7 +208,6 @@
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......
arch/arm/boot/dts/kirkwood-ts219.dtsi
浏览文件 @ 4d8880a0
......@@ -104,7 +104,6 @@
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
......
arch/arm/boot/dts/kirkwood.dtsi
浏览文件 @ 4d8880a0
......@@ -243,7 +243,6 @@
status = "disabled";
ethernet0-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
......@@ -275,7 +274,6 @@
status = "disabled";
ethernet1-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
......
arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
浏览文件 @ 4d8880a0
......@@ -58,7 +58,6 @@
status = "okay";
ethphy: ethernet-phy {
device_type = "ethernet-phy";
reg = <8>;
};
};
......
arch/arm/boot/dts/orion5x.dtsi
浏览文件 @ 4d8880a0
......@@ -120,7 +120,6 @@
status = "disabled";
ethernet-port@0 {
device_type = "network";
compatible = "marvell,orion-eth-port";
reg = <0>;
/* overwrite MAC address in bootloader */
......
arch/microblaze/platform/generic/system.dts
浏览文件 @ 4d8880a0
......@@ -222,7 +222,6 @@
ranges ;
ethernet@81c00000 {
compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
device_type = "network";
interrupt-parent = <&xps_intc_0>;
interrupts = < 5 2 >;
llink-connected = <&PIM3>;
......
arch/powerpc/boot/dts/adder875-redboot.dts
浏览文件 @ 4d8880a0
......@@ -87,12 +87,10 @@
PHY0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/adder875-uboot.dts
浏览文件 @ 4d8880a0
......@@ -86,12 +86,10 @@
PHY0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/asp834x-redboot.dts
浏览文件 @ 4d8880a0
......@@ -207,14 +207,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/c2k.dts
浏览文件 @ 4d8880a0
......@@ -73,19 +73,16 @@
compatible = "marvell,mv64360-mdio";
reg = <0x2000 4>;
PHY0: ethernet-phy@0 {
device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <0>;
};
PHY1: ethernet-phy@1 {
device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <1>;
};
PHY2: ethernet-phy@2 {
device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <2>;
......@@ -174,7 +171,6 @@
};
MPSC0: mpsc@8000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xd8008000>;
......@@ -189,7 +185,6 @@
};
MPSC1: mpsc@9000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xd8009000>;
......
arch/powerpc/boot/dts/ep8248e.dts
浏览文件 @ 4d8880a0
......@@ -67,7 +67,6 @@
ranges;
mdio {
device_type = "mdio";
compatible = "fsl,ep8248e-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
......@@ -76,13 +75,11 @@
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
reg = <1>;
device_type = "ethernet-phy";
};
};
};
......
arch/powerpc/boot/dts/ep88xc.dts
浏览文件 @ 4d8880a0
......@@ -85,12 +85,10 @@
PHY0: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <0x1>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/gef_ppc9a.dts
浏览文件 @ 4d8880a0
......@@ -292,13 +292,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/gef_sbc310.dts
浏览文件 @ 4d8880a0
......@@ -290,13 +290,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/gef_sbc610.dts
浏览文件 @ 4d8880a0
......@@ -290,13 +290,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/holly.dts
浏览文件 @ 4d8880a0
......@@ -58,7 +58,6 @@
};
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi109-mdio", "tsi108-mdio";
reg = <0x00006000 0x00000050>;
#address-cells = <1>;
......
arch/powerpc/boot/dts/ksi8560.dts
浏览文件 @ 4d8880a0
......@@ -161,13 +161,11 @@
PHY1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......@@ -284,7 +282,6 @@
PHY0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
reg = <0x0>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/mpc7448hpc2.dts
浏览文件 @ 4d8880a0
......@@ -68,7 +68,6 @@
};
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi108-mdio";
reg = <0x6000 0x50>;
#address-cells = <1>;
......
arch/powerpc/boot/dts/mpc8272ads.dts
浏览文件 @ 4d8880a0
......@@ -182,7 +182,6 @@
};
mdio@10d40 {
device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
......@@ -196,14 +195,12 @@
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/mpc8308_p1m.dts
浏览文件 @ 4d8880a0
......@@ -189,13 +189,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8308rdb.dts
浏览文件 @ 4d8880a0
......@@ -166,7 +166,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8313erdb.dts
浏览文件 @ 4d8880a0
......@@ -217,7 +217,6 @@
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8315erdb.dts
浏览文件 @ 4d8880a0
......@@ -216,14 +216,12 @@
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc832x_mds.dts
浏览文件 @ 4d8880a0
......@@ -356,13 +356,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@04 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x4>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/mpc832x_rdb.dts
浏览文件 @ 4d8880a0
......@@ -314,13 +314,11 @@
interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x4>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/mpc8349emitx.dts
浏览文件 @ 4d8880a0
......@@ -240,7 +240,6 @@
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8349emitxgp.dts
浏览文件 @ 4d8880a0
......@@ -176,7 +176,6 @@
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc834x_mds.dts
浏览文件 @ 4d8880a0
......@@ -193,14 +193,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc836x_mds.dts
浏览文件 @ 4d8880a0
......@@ -397,13 +397,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@01 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi-phy@2 {
device_type = "tbi-phy";
......
arch/powerpc/boot/dts/mpc836x_rdk.dts
浏览文件 @ 4d8880a0
......@@ -332,25 +332,21 @@
reg = <0x2120 0x18>;
phy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "national,DP83848VV";
reg = <1>;
};
phy2: ethernet-phy@2 {
device_type = "ethernet-phy";
compatible = "broadcom,BCM5481UA2KMLG";
reg = <2>;
};
phy3: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "national,DP83848VV";
reg = <3>;
};
phy4: ethernet-phy@4 {
device_type = "ethernet-phy";
compatible = "broadcom,BCM5481UA2KMLG";
reg = <4>;
};
......
arch/powerpc/boot/dts/mpc8377_mds.dts
浏览文件 @ 4d8880a0
......@@ -225,14 +225,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8377_rdb.dts
浏览文件 @ 4d8880a0
......@@ -277,7 +277,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8377_wlan.dts
浏览文件 @ 4d8880a0
......@@ -253,14 +253,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8378_mds.dts
浏览文件 @ 4d8880a0
......@@ -264,14 +264,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8378_rdb.dts
浏览文件 @ 4d8880a0
......@@ -277,7 +277,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8379_mds.dts
浏览文件 @ 4d8880a0
......@@ -262,14 +262,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8379_rdb.dts
浏览文件 @ 4d8880a0
......@@ -275,7 +275,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/mpc8536ds.dtsi
浏览文件 @ 4d8880a0
......@@ -200,12 +200,10 @@
phy0: ethernet-phy@0 {
interrupts = <10 0x1 0 0>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <10 0x1 0 0>;
reg = <1>;
device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
......
arch/powerpc/boot/dts/mpc8540ads.dts
浏览文件 @ 4d8880a0
......@@ -165,19 +165,16 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8541cds.dts
浏览文件 @ 4d8880a0
......@@ -165,13 +165,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8544ds.dtsi
浏览文件 @ 4d8880a0
......@@ -82,12 +82,10 @@
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
......
arch/powerpc/boot/dts/mpc8548cds.dtsi
浏览文件 @ 4d8880a0
......@@ -109,22 +109,18 @@
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8555cds.dts
浏览文件 @ 4d8880a0
......@@ -165,13 +165,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8560ads.dts
浏览文件 @ 4d8880a0
......@@ -154,25 +154,21 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8568mds.dts
浏览文件 @ 4d8880a0
......@@ -91,22 +91,18 @@
phy0: ethernet-phy@7 {
interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <1 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <2 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......@@ -236,25 +232,21 @@
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
};
......
arch/powerpc/boot/dts/mpc8569mds.dts
浏览文件 @ 4d8880a0
......@@ -276,33 +276,27 @@
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <3 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
qe_phy5: ethernet-phy@04 {
reg = <0x04>;
device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
reg = <0x6>;
device_type = "ethernet-phy";
};
tbi1: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8641_hpcn.dts
浏览文件 @ 4d8880a0
......@@ -211,25 +211,21 @@
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
浏览文件 @ 4d8880a0
......@@ -211,25 +211,21 @@
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/mpc866ads.dts
浏览文件 @ 4d8880a0
......@@ -74,7 +74,6 @@
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <0xf>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/mpc885ads.dts
浏览文件 @ 4d8880a0
......@@ -86,17 +86,14 @@
PHY0: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
reg = <0x2>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/p1021mds.dts
浏览文件 @ 4d8880a0
......@@ -295,13 +295,11 @@
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/p1025rdb_32b.dts
浏览文件 @ 4d8880a0
......@@ -105,13 +105,11 @@
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x6>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/ppa8548.dts
浏览文件 @ 4d8880a0
......@@ -110,12 +110,10 @@
phy0: ethernet-phy@0 {
interrupts = <7 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <8 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/pq2fads.dts
浏览文件 @ 4d8880a0
......@@ -198,7 +198,6 @@
};
mdio@10d40 {
device_type = "mdio";
compatible = "fsl,pq2fads-mdio-bitbang",
"fsl,mpc8280-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
......@@ -212,14 +211,12 @@
interrupt-parent = <&PIC>;
interrupts = <25 2>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <25 2>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/boot/dts/prpmc2800.dts
浏览文件 @ 4d8880a0
......@@ -73,17 +73,14 @@
mdio {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64360-mdio";
PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <1>;
};
PHY1: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
......@@ -162,7 +159,6 @@
};
MPSC0: mpsc@8000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
......@@ -177,7 +173,6 @@
};
MPSC1: mpsc@9000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xf1009000>;
......
arch/powerpc/boot/dts/sbc8349.dts
浏览文件 @ 4d8880a0
......@@ -173,14 +173,12 @@
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&ipic>;
interrupts = <21 0x8>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
......
arch/powerpc/boot/dts/sbc8548-post.dtsi
浏览文件 @ 4d8880a0
......@@ -137,13 +137,11 @@
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/sbc8641d.dts
浏览文件 @ 4d8880a0
......@@ -230,25 +230,21 @@
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1f>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/stx_gp3_8560.dts
浏览文件 @ 4d8880a0
......@@ -161,13 +161,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <2>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/stxssa8555.dts
浏览文件 @ 4d8880a0
......@@ -164,13 +164,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8540.dts
浏览文件 @ 4d8880a0
......@@ -172,19 +172,16 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8541.dts
浏览文件 @ 4d8880a0
......@@ -172,19 +172,16 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8548-bigflash.dts
浏览文件 @ 4d8880a0
......@@ -185,31 +185,26 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8548.dts
浏览文件 @ 4d8880a0
......@@ -185,31 +185,26 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8555.dts
浏览文件 @ 4d8880a0
......@@ -172,19 +172,16 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8560.dts
浏览文件 @ 4d8880a0
......@@ -174,19 +174,16 @@
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
......
arch/powerpc/boot/dts/tqm8xx.dts
浏览文件 @ 4d8880a0
......@@ -107,7 +107,6 @@
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <0xf>;
device_type = "ethernet-phy";
};
};
......
arch/powerpc/sysdev/mv64x60_dev.c
浏览文件 @ 4d8880a0
......@@ -448,7 +448,7 @@ static int __init mv64x60_device_setup(void)
int err;
id = 0;
for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") {
err = mv64x60_mpsc_device_setup(np, id++);
if (err)
printk(KERN_ERR "Failed to initialize MV64x60 "
......
arch/powerpc/sysdev/mv64x60_udbg.c
浏览文件 @ 4d8880a0
此差异已折叠。
drivers/of/base.c
浏览文件 @ 4d8880a0
此差异已折叠。
drivers/of/irq.c
浏览文件 @ 4d8880a0
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或