提交 4d114fdd 编写于 作者: J Jubin John 提交者: Doug Ledford

staging/rdma/hfi1: Fix block comments

Fix block comments with proper formatting to fix checkpatch warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 6a14c5ea
......@@ -6392,14 +6392,18 @@ static void dc_shutdown(struct hfi1_devdata *dd)
spin_unlock_irqrestore(&dd->dc8051_lock, flags);
/* Shutdown the LCB */
lcb_shutdown(dd, 1);
/* Going to OFFLINE would have causes the 8051 to put the
/*
* Going to OFFLINE would have causes the 8051 to put the
* SerDes into reset already. Just need to shut down the 8051,
* itself. */
* itself.
*/
write_csr(dd, DC_DC8051_CFG_RST, 0x1);
}
/* Calling this after the DC has been brought out of reset should not
* do any damage. */
/*
* Calling this after the DC has been brought out of reset should not
* do any damage.
*/
static void dc_start(struct hfi1_devdata *dd)
{
unsigned long flags;
......@@ -6525,8 +6529,10 @@ void handle_sma_message(struct work_struct *work)
u64 msg;
int ret;
/* msg is bytes 1-4 of the 40-bit idle message - the command code
is stripped off */
/*
* msg is bytes 1-4 of the 40-bit idle message - the command code
* is stripped off
*/
ret = read_idle_sma(dd, &msg);
if (ret)
return;
......@@ -6815,8 +6821,10 @@ void handle_link_up(struct work_struct *work)
}
}
/* Several pieces of LNI information were cached for SMA in ppd.
* Reset these on link down */
/*
* Several pieces of LNI information were cached for SMA in ppd.
* Reset these on link down
*/
static void reset_neighbor_info(struct hfi1_pportdata *ppd)
{
ppd->neighbor_guid = 0;
......@@ -6862,8 +6870,10 @@ void handle_link_down(struct work_struct *work)
/* disable the port */
clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
/* If there is no cable attached, turn the DC off. Otherwise,
* start the link bring up. */
/*
* If there is no cable attached, turn the DC off. Otherwise,
* start the link bring up.
*/
if (!qsfp_mod_present(ppd)) {
dc_shutdown(ppd->dd);
} else {
......@@ -7564,8 +7574,10 @@ static void handle_8051_interrupt(struct hfi1_devdata *dd, u32 unused, u64 reg)
}
if (queue_link_down) {
/* if the link is already going down or disabled, do not
* queue another */
/*
* if the link is already going down or disabled, do not
* queue another
*/
if ((ppd->host_link_state &
(HLS_GOING_OFFLINE | HLS_LINK_COOLDOWN)) ||
ppd->link_enabled == 0) {
......@@ -7712,8 +7724,10 @@ static void handle_dcc_err(struct hfi1_devdata *dd, u32 unused, u64 reg)
/* set status bit */
dd->err_info_rcvport.status_and_code |=
OPA_EI_STATUS_SMASK;
/* save first 2 flits in the packet that caused
* the error */
/*
* save first 2 flits in the packet that caused
* the error
*/
dd->err_info_rcvport.packet_flit1 = hdr0;
dd->err_info_rcvport.packet_flit2 = hdr1;
}
......@@ -7913,8 +7927,10 @@ static void is_reserved_int(struct hfi1_devdata *dd, unsigned int source)
}
static const struct is_table is_table[] = {
/* start end
name func interrupt func */
/*
* start end
* name func interrupt func
*/
{ IS_GENERAL_ERR_START, IS_GENERAL_ERR_END,
is_misc_err_name, is_misc_err_int },
{ IS_SDMAENG_ERR_START, IS_SDMAENG_ERR_END,
......@@ -10763,8 +10779,10 @@ int set_buffer_control(struct hfi1_pportdata *ppd,
*/
memset(changing, 0, sizeof(changing));
memset(lowering_dedicated, 0, sizeof(lowering_dedicated));
/* NOTE: Assumes that the individual VL bits are adjacent and in
increasing order */
/*
* NOTE: Assumes that the individual VL bits are adjacent and in
* increasing order
*/
stat_mask =
SEND_CM_CREDIT_USED_STATUS_VL0_RETURN_CREDIT_STATUS_SMASK;
changing_mask = 0;
......@@ -11129,8 +11147,10 @@ static void adjust_rcv_timeout(struct hfi1_ctxtdata *rcd, u32 npkts)
}
rcd->rcvavail_timeout = timeout;
/* timeout cannot be larger than rcv_intr_timeout_csr which has already
been verified to be in range */
/*
* timeout cannot be larger than rcv_intr_timeout_csr which has already
* been verified to be in range
*/
write_kctxt_csr(dd, rcd->ctxt, RCV_AVAIL_TIME_OUT,
(u64)timeout << RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_SHIFT);
}
......@@ -11323,8 +11343,10 @@ void hfi1_rcvctrl(struct hfi1_devdata *dd, unsigned int op, int ctxt)
if (op & HFI1_RCVCTRL_TIDFLOW_DIS)
rcvctrl &= ~RCV_CTXT_CTRL_TID_FLOW_ENABLE_SMASK;
if (op & HFI1_RCVCTRL_ONE_PKT_EGR_ENB) {
/* In one-packet-per-eager mode, the size comes from
the RcvArray entry. */
/*
* In one-packet-per-eager mode, the size comes from
* the RcvArray entry.
*/
rcvctrl &= ~RCV_CTXT_CTRL_EGR_BUF_SIZE_SMASK;
rcvctrl |= RCV_CTXT_CTRL_ONE_PACKET_PER_EGR_BUFFER_SMASK;
}
......@@ -12524,7 +12546,8 @@ static int request_msix_irqs(struct hfi1_devdata *dd)
me->type = IRQ_RCVCTXT;
} else {
/* not in our expected range - complain, then
ignore it */
* ignore it
*/
dd_dev_err(dd,
"Unexpected extra MSI-X interrupt %d\n", i);
continue;
......@@ -12830,8 +12853,10 @@ static void write_uninitialized_csrs_and_memories(struct hfi1_devdata *dd)
/* PIO Send buffers */
/* SDMA Send buffers */
/* These are not normally read, and (presently) have no method
to be read, so are not pre-initialized */
/*
* These are not normally read, and (presently) have no method
* to be read, so are not pre-initialized
*/
/* RcvHdrAddr */
/* RcvHdrTailAddr */
......@@ -13026,8 +13051,10 @@ static void reset_misc_csrs(struct hfi1_devdata *dd)
write_csr(dd, MISC_CFG_RSA_SIGNATURE + (8 * i), 0);
write_csr(dd, MISC_CFG_RSA_MODULUS + (8 * i), 0);
}
/* MISC_CFG_SHA_PRELOAD leave alone - always reads 0 and can
only be written 128-byte chunks */
/*
* MISC_CFG_SHA_PRELOAD leave alone - always reads 0 and can
* only be written 128-byte chunks
*/
/* init RSA engine to clear lingering errors */
write_csr(dd, MISC_CFG_RSA_CMD, 1);
write_csr(dd, MISC_CFG_RSA_MU, 0);
......@@ -14045,8 +14072,10 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
dd->minrev = (dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT)
& CCE_REVISION_CHIP_REV_MINOR_MASK;
/* obtain the hardware ID - NOT related to unit, which is a
software enumeration */
/*
* obtain the hardware ID - NOT related to unit, which is a
* software enumeration
*/
reg = read_csr(dd, CCE_REVISION2);
dd->hfi1_id = (reg >> CCE_REVISION2_HFI_ID_SHIFT)
& CCE_REVISION2_HFI_ID_MASK;
......
......@@ -79,8 +79,10 @@
#define PIO_CMASK 0x7ff /* counter mask for free and fill counters */
#define MAX_EAGER_ENTRIES 2048 /* max receive eager entries */
#define MAX_TID_PAIR_ENTRIES 1024 /* max receive expected pairs */
/* Virtual? Allocation Unit, defined as AU = 8*2^vAU, 64 bytes, AU is fixed
at 64 bytes for all generation one devices */
/*
* Virtual? Allocation Unit, defined as AU = 8*2^vAU, 64 bytes, AU is fixed
* at 64 bytes for all generation one devices
*/
#define CM_VAU 3
/* HFI link credit count, AKA receive buffer depth (RBUF_DEPTH) */
#define CM_GLOBAL_CREDITS 0x940
......@@ -518,8 +520,10 @@ enum {
#define LCB_CRC_48B 0x2 /* 48b CRC */
#define LCB_CRC_12B_16B_PER_LANE 0x3 /* 12b-16b per lane CRC */
/* the following enum is (almost) a copy/paste of the definition
* in the OPA spec, section 20.2.2.6.8 (PortInfo) */
/*
* the following enum is (almost) a copy/paste of the definition
* in the OPA spec, section 20.2.2.6.8 (PortInfo)
*/
enum {
PORT_LTP_CRC_MODE_NONE = 0,
PORT_LTP_CRC_MODE_14 = 1, /* 14-bit LTP CRC mode (optional) */
......
......@@ -388,8 +388,10 @@ static ssize_t hfi1_file_write(struct file *fp, const char __user *data,
break;
}
if (dd->flags & HFI1_FORCED_FREEZE) {
/* Don't allow context reset if we are into
* forced freeze */
/*
* Don't allow context reset if we are into
* forced freeze
*/
ret = -ENODEV;
break;
}
......
......@@ -1294,8 +1294,10 @@ static int load_pcie_serdes_firmware(struct hfi1_devdata *dd,
/* step 3: enable XDMEM access */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000d40);
/* step 4: load firmware into SBus Master XDMEM */
/* NOTE: the dmem address, write_en, and wdata are all pre-packed,
we only need to pick up the bytes and write them */
/*
* NOTE: the dmem address, write_en, and wdata are all pre-packed,
* we only need to pick up the bytes and write them
*/
for (i = 0; i < fdet->firmware_len; i += 4) {
sbus_request(dd, ra, 0x04, WRITE_SBUS_RECEIVER,
*(u32 *)&fdet->firmware_ptr[i]);
......@@ -1305,8 +1307,10 @@ static int load_pcie_serdes_firmware(struct hfi1_devdata *dd,
/* step 6: allow SBus Spico to run */
sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000000);
/* steps 7-11: run RSA, if it succeeds, firmware is available to
be swapped */
/*
* steps 7-11: run RSA, if it succeeds, firmware is available to
* be swapped
*/
return run_rsa(dd, "PCIe serdes", fdet->signature);
}
......@@ -1744,8 +1748,10 @@ int get_platform_config_field(struct hfi1_devdata *dd,
src_ptr = (u32 *)((u8 *)src_ptr + seek);
/* We expect the field to be byte aligned and whole byte
* lengths if we are here */
/*
* We expect the field to be byte aligned and whole byte
* lengths if we are here
*/
memcpy(data, src_ptr, wlen);
return 0;
}
......
......@@ -718,8 +718,10 @@ struct hfi1_pportdata {
/* CA's max number of 64 entry units in the congestion control table */
u8 cc_max_table_entries;
/* begin congestion log related entries
* cc_log_lock protects all congestion log related data */
/*
* begin congestion log related entries
* cc_log_lock protects all congestion log related data
*/
spinlock_t cc_log_lock ____cacheline_aligned_in_smp;
u8 threshold_cong_event_map[OPA_MAX_SLS / 8];
u16 threshold_event_counter;
......
......@@ -790,8 +790,10 @@ int hfi1_init(struct hfi1_devdata *dd, int reinit)
for (pidx = 0; pidx < dd->num_pports; ++pidx) {
ppd = dd->pport + pidx;
/* start the serdes - must be after interrupts are
enabled so we are notified when the link goes up */
/*
* start the serdes - must be after interrupts are
* enabled so we are notified when the link goes up
*/
lastfail = bringup_serdes(ppd);
if (lastfail)
dd_dev_info(dd,
......@@ -1188,8 +1190,10 @@ static int __init hfi1_mod_init(void)
user_credit_return_threshold = 100;
compute_krcvqs();
/* sanitize receive interrupt count, time must wait until after
the hardware type is known */
/*
* sanitize receive interrupt count, time must wait until after
* the hardware type is known
*/
if (rcv_intr_count > RCV_HDR_HEAD_COUNTER_MASK)
rcv_intr_count = RCV_HDR_HEAD_COUNTER_MASK;
/* reject invalid combinations */
......
......@@ -696,8 +696,10 @@ static int __subn_get_opa_portinfo(struct opa_smp *smp, u32 am, u8 *data,
/* read the cached value of DC_LCB_STS_ROUND_TRIP_LTP_CNT */
read_lcb_cache(DC_LCB_STS_ROUND_TRIP_LTP_CNT, &tmp);
/* this counter is 16 bits wide, but the replay_depth.wire
* variable is only 8 bits */
/*
* this counter is 16 bits wide, but the replay_depth.wire
* variable is only 8 bits
*/
if (tmp > 0xff)
tmp = 0xff;
pi->replay_depth.wire = tmp;
......@@ -1621,8 +1623,10 @@ static int __subn_set_opa_sc_to_vlt(struct opa_smp *smp, u32 am, u8 *data,
/* IB numbers ports from 1, hw from 0 */
ppd = dd->pport + (port - 1);
lstate = driver_lstate(ppd);
/* it's known that async_update is 0 by this point, but include
* the explicit check for clarity */
/*
* it's known that async_update is 0 by this point, but include
* the explicit check for clarity
*/
if (!async_update &&
(lstate == IB_PORT_ARMED || lstate == IB_PORT_ACTIVE)) {
smp->status |= IB_SMP_INVALID_FIELD;
......@@ -1797,8 +1801,10 @@ static int __subn_get_opa_cable_info(struct opa_smp *smp, u32 am, u8 *data,
#define __CI_PAGE_MASK ~(__CI_PAGE_SIZE - 1)
#define __CI_PAGE_NUM(a) ((a) & __CI_PAGE_MASK)
/* check that addr is within spec, and
* addr and (addr + len - 1) are on the same "page" */
/*
* check that addr is within spec, and
* addr and (addr + len - 1) are on the same "page"
*/
if (addr >= 4096 ||
(__CI_PAGE_NUM(addr) != __CI_PAGE_NUM(addr + len - 1))) {
smp->status |= IB_SMP_INVALID_FIELD;
......@@ -1935,8 +1941,10 @@ static int __subn_set_opa_vl_arb(struct opa_smp *smp, u32 am, u8 *data,
case OPA_VLARB_HIGH_ELEMENTS:
(void)fm_set_table(ppd, FM_TBL_VL_HIGH_ARB, p);
break;
/* neither OPA_VLARB_PREEMPT_ELEMENTS, or OPA_VLARB_PREEMPT_MATRIX
* can be changed from the default values */
/*
* neither OPA_VLARB_PREEMPT_ELEMENTS, or OPA_VLARB_PREEMPT_MATRIX
* can be changed from the default values
*/
case OPA_VLARB_PREEMPT_ELEMENTS:
/* FALLTHROUGH */
case OPA_VLARB_PREEMPT_MATRIX:
......@@ -2148,8 +2156,10 @@ struct opa_port_data_counters_msg {
};
struct opa_port_error_counters64_msg {
/* Request contains first two fields, response contains the
* whole magilla */
/*
* Request contains first two fields, response contains the
* whole magilla
*/
__be64 port_select_mask[4];
__be32 vl_select_mask;
......@@ -2673,11 +2683,12 @@ static int pma_get_opa_datacounters(struct opa_pma_mad *pmp,
/* rsp->port_vl_xmit_time_cong is 0 for HFIs */
/* rsp->port_vl_xmit_wasted_bw ??? */
/* port_vl_xmit_wait_data - TXE (table 13-9 HFI spec) ???
* does this differ from rsp->vls[vfi].port_vl_xmit_wait */
* does this differ from rsp->vls[vfi].port_vl_xmit_wait
*/
/*rsp->vls[vfi].port_vl_mark_fecn =
cpu_to_be64(read_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT
+ offset));
*/
* cpu_to_be64(read_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT
* + offset));
*/
vlinfo++;
vfi++;
}
......@@ -2996,8 +3007,10 @@ static int pma_get_opa_errorinfo(struct opa_pma_mad *pmp,
/* ExcessiverBufferOverrunInfo */
reg = read_csr(dd, RCV_ERR_INFO);
if (reg & RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK) {
/* if the RcvExcessBufferOverrun bit is set, save SC of
* first pkt that encountered an excess buffer overrun */
/*
* if the RcvExcessBufferOverrun bit is set, save SC of
* first pkt that encountered an excess buffer overrun
*/
u8 tmp = (u8)reg;
tmp &= RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SC_SMASK;
......@@ -3093,8 +3106,9 @@ static int pma_set_opa_portstatus(struct opa_pma_mad *pmp,
write_dev_cntr(dd, C_DC_RCV_BBL, CNTR_INVALID_VL, 0);
/* Only applicable for switch */
/*if (counter_select & CS_PORT_MARK_FECN)
write_csr(dd, DCC_PRF_PORT_MARK_FECN_CNT, 0);*/
/* if (counter_select & CS_PORT_MARK_FECN)
* write_csr(dd, DCC_PRF_PORT_MARK_FECN_CNT, 0);
*/
if (counter_select & CS_PORT_RCV_CONSTRAINT_ERRORS)
write_port_cntr(ppd, C_SW_RCV_CSTR_ERR, CNTR_INVALID_VL, 0);
......@@ -3167,9 +3181,9 @@ static int pma_set_opa_portstatus(struct opa_pma_mad *pmp,
if (counter_select & CS_PORT_RCV_BUBBLE)
write_dev_cntr(dd, C_DC_RCV_BBL_VL, idx_from_vl(vl), 0);
/*if (counter_select & CS_PORT_MARK_FECN)
write_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT + offset, 0);
*/
/* if (counter_select & CS_PORT_MARK_FECN)
* write_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT + offset, 0);
*/
/* port_vl_xmit_discards ??? */
}
......@@ -3226,8 +3240,10 @@ static int pma_set_opa_errorinfo(struct opa_pma_mad *pmp,
/* ExcessiverBufferOverrunInfo */
if (error_info_select & ES_EXCESSIVE_BUFFER_OVERRUN_INFO)
/* status bit is essentially kept in the h/w - bit 5 of
* RCV_ERR_INFO */
/*
* status bit is essentially kept in the h/w - bit 5 of
* RCV_ERR_INFO
*/
write_csr(dd, RCV_ERR_INFO,
RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK);
......
......@@ -51,8 +51,10 @@
#define _HFI1_MAD_H
#include <rdma/ib_pma.h>
#define USE_PI_LED_ENABLE 1 /* use led enabled bit in struct
* opa_port_states, if available */
#define USE_PI_LED_ENABLE 1 /*
* use led enabled bit in struct
* opa_port_states, if available
*/
#include <rdma/opa_smi.h>
#include <rdma/opa_port_info.h>
#ifndef PI_LED_ENABLE_SUP
......
......@@ -284,9 +284,11 @@ static void msix_setup(struct hfi1_devdata *dd, int pos, u32 *msixcnt,
struct msix_entry *msix_entry;
int i;
/* We can't pass hfi1_msix_entry array to msix_setup
/*
* We can't pass hfi1_msix_entry array to msix_setup
* so use a dummy msix_entry array and copy the allocated
* irq back to the hfi1_msix_entry array. */
* irq back to the hfi1_msix_entry array.
*/
msix_entry = kmalloc_array(nvec, sizeof(*msix_entry), GFP_KERNEL);
if (!msix_entry) {
ret = -ENOMEM;
......
......@@ -177,8 +177,10 @@ static struct mem_pool_config sc_mem_pool_config[NUM_SC_POOLS] = {
/* memory pool information, used when calculating final sizes */
struct mem_pool_info {
int centipercent; /* 100th of 1% of memory to use, -1 if blocks
already set */
int centipercent; /*
* 100th of 1% of memory to use, -1 if blocks
* already set
*/
int count; /* count of contexts in the pool */
int blocks; /* block size of the pool */
int size; /* context size, in blocks */
......@@ -1429,8 +1431,10 @@ struct pio_buf *sc_buffer_alloc(struct send_context *sc, u32 dw_len,
next = head + 1;
if (next >= sc->sr_size)
next = 0;
/* update the head - must be last! - the releaser can look at fields
in pbuf once we move the head */
/*
* update the head - must be last! - the releaser can look at fields
* in pbuf once we move the head
*/
smp_wmb();
sc->sr_head = next;
spin_unlock_irqrestore(&sc->alloc_lock, flags);
......
......@@ -86,8 +86,10 @@ void pio_copy(struct hfi1_devdata *dd, struct pio_buf *pbuf, u64 pbc,
dend = dest + ((count >> 1) * sizeof(u64));
if (dend < send) {
/* all QWORD data is within the SOP block, does *not*
reach the end of the SOP block */
/*
* all QWORD data is within the SOP block, does *not*
* reach the end of the SOP block
*/
while (dest < dend) {
writeq(*(u64 *)from, dest);
......@@ -152,8 +154,10 @@ void pio_copy(struct hfi1_devdata *dd, struct pio_buf *pbuf, u64 pbc,
writeq(val.val64, dest);
dest += sizeof(u64);
}
/* fill in rest of block, no need to check pbuf->end
as we only wrap on a block boundary */
/*
* fill in rest of block, no need to check pbuf->end
* as we only wrap on a block boundary
*/
while (((unsigned long)dest & PIO_BLOCK_MASK) != 0) {
writeq(0, dest);
dest += sizeof(u64);
......@@ -466,8 +470,10 @@ void seg_pio_copy_start(struct pio_buf *pbuf, u64 pbc,
dend = dest + ((nbytes >> 3) * sizeof(u64));
if (dend < send) {
/* all QWORD data is within the SOP block, does *not*
reach the end of the SOP block */
/*
* all QWORD data is within the SOP block, does *not*
* reach the end of the SOP block
*/
while (dest < dend) {
writeq(*(u64 *)from, dest);
......@@ -562,8 +568,10 @@ static void mid_copy_mix(struct pio_buf *pbuf, const void *from, size_t nbytes)
void __iomem *send; /* SOP end */
void __iomem *xend;
/* calculate the end of data or end of block, whichever
comes first */
/*
* calculate the end of data or end of block, whichever
* comes first
*/
send = pbuf->start + PIO_BLOCK_SIZE;
xend = send < dend ? send : dend;
......@@ -656,8 +664,10 @@ static void mid_copy_straight(struct pio_buf *pbuf,
void __iomem *send; /* SOP end */
void __iomem *xend;
/* calculate the end of data or end of block, whichever
comes first */
/*
* calculate the end of data or end of block, whichever
* comes first
*/
send = pbuf->start + PIO_BLOCK_SIZE;
xend = send < dend ? send : dend;
......
......@@ -186,9 +186,9 @@ static const u32 platform_config_table_limits[PLATFORM_CONFIG_TABLE_MAX] = {
*/
/*
*=====================================================
* =====================================================
* System table encodings
*====================================================
* =====================================================
*/
#define PLATFORM_CONFIG_MAGIC_NUM 0x3d4f5041
#define PLATFORM_CONFIG_MAGIC_NUMBER_LEN 4
......@@ -208,9 +208,9 @@ enum platform_config_qsfp_power_class_encoding {
};
/*
*=====================================================
* ====================================================
* Port table encodings
*====================================================
* ====================================================
*/
enum platform_config_port_type_encoding {
PORT_TYPE_UNKNOWN,
......
......@@ -2219,7 +2219,8 @@ static void __sdma_process_event(struct sdma_engine *sde,
* of link up, then we need to start up.
* This can happen when hw down is requested while
* bringing the link up with traffic active on
* 7220, e.g. */
* 7220, e.g.
*/
ss->go_s99_running = 1;
/* fall through and start dma engine */
case sdma_event_e10_go_hw_start:
......
......@@ -179,8 +179,10 @@ struct user_sdma_iovec {
unsigned npages;
/* array of pinned pages for this vector */
struct page **pages;
/* offset into the virtual address space of the vector at
* which we last left off. */
/*
* offset into the virtual address space of the vector at
* which we last left off.
*/
u64 offset;
};
......@@ -596,8 +598,10 @@ int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec,
}
req->koffset = le32_to_cpu(req->hdr.kdeth.swdata[6]);
/* Calculate the initial TID offset based on the values of
KDETH.OFFSET and KDETH.OM that are passed in. */
/*
* Calculate the initial TID offset based on the values of
* KDETH.OFFSET and KDETH.OM that are passed in.
*/
req->tidoffset = KDETH_GET(req->hdr.kdeth.ver_tid_offset, OFFSET) *
(KDETH_GET(req->hdr.kdeth.ver_tid_offset, OM) ?
KDETH_OM_LARGE : KDETH_OM_SMALL);
......@@ -742,8 +746,10 @@ static inline u32 compute_data_length(struct user_sdma_request *req,
} else if (req_opcode(req->info.ctrl) == EXPECTED) {
u32 tidlen = EXP_TID_GET(req->tids[req->tididx], LEN) *
PAGE_SIZE;
/* Get the data length based on the remaining space in the
* TID pair. */
/*
* Get the data length based on the remaining space in the
* TID pair.
*/
len = min(tidlen - req->tidoffset, (u32)req->info.fragsize);
/* If we've filled up the TID pair, move to the next one. */
if (unlikely(!len) && ++req->tididx < req->n_tids &&
......@@ -753,9 +759,11 @@ static inline u32 compute_data_length(struct user_sdma_request *req,
req->tidoffset = 0;
len = min_t(u32, tidlen, req->info.fragsize);
}
/* Since the TID pairs map entire pages, make sure that we
/*
* Since the TID pairs map entire pages, make sure that we
* are not going to try to send more data that we have
* remaining. */
* remaining.
*/
len = min(len, req->data_len - req->sent);
} else
len = min(req->data_len - req->sent, (u32)req->info.fragsize);
......@@ -979,8 +987,10 @@ static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts)
req->sent += data_sent;
if (req->data_len) {
tx->iovecs[tx->idx].vec->offset += iov_offset;
/* If we've reached the end of the io vector, mark it
* so the callback can unpin the pages and free it. */
/*
* If we've reached the end of the io vector, mark it
* so the callback can unpin the pages and free it.
*/
if (tx->iovecs[tx->idx].vec->offset ==
tx->iovecs[tx->idx].vec->iov.iov_len)
tx->iovecs[tx->idx].flags |=
......@@ -1216,8 +1226,10 @@ static int set_txreq_header(struct user_sdma_request *req,
if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) *
PAGE_SIZE)) {
req->tidoffset = 0;
/* Since we don't copy all the TIDs, all at once,
* we have to check again. */
/*
* Since we don't copy all the TIDs, all at once,
* we have to check again.
*/
if (++req->tididx > req->n_tids - 1 ||
!req->tids[req->tididx]) {
return -EINVAL;
......@@ -1298,8 +1310,10 @@ static int set_txreq_header_ahg(struct user_sdma_request *req,
if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) *
PAGE_SIZE)) {
req->tidoffset = 0;
/* Since we don't copy all the TIDs, all at once,
* we have to check again. */
/*
* Since we don't copy all the TIDs, all at once,
* we have to check again.
*/
if (++req->tididx > req->n_tids - 1 ||
!req->tids[req->tididx]) {
return -EINVAL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册