提交 4c43e0d0 编写于 作者: T Tomas Winkler 提交者: John W. Linville

iwlwifi: HW bug fixes

This patch adds few HW bug fixes.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 6041e2a0
...@@ -93,6 +93,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv) ...@@ -93,6 +93,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
/* Set FH wait treshold to maximum (HW error during stress W/A) */
iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
/* enable HAP INTA to move device L1a -> L0s */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
/* set "initialization complete" bit to move adapter /* set "initialization complete" bit to move adapter
...@@ -230,6 +237,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv) ...@@ -230,6 +237,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* W/A : NIC is stuck in a reset state after Early PCIe power off
* (PCIe power is lost before PERST# is asserted),
* causing ME FW to lose ownership and not being able to obtain it back.
*/
iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
spin_unlock_irqrestore(&priv->lock, flags); spin_unlock_irqrestore(&priv->lock, flags);
} }
......
...@@ -104,6 +104,7 @@ ...@@ -104,6 +104,7 @@
* 3-2: 0 = A, 1 = B, 2 = C, 3 = D step * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
*/ */
#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
/* Bits for CSR_HW_IF_CONFIG_REG */ /* Bits for CSR_HW_IF_CONFIG_REG */
#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
...@@ -118,7 +119,12 @@ ...@@ -118,7 +119,12 @@
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM (0x00400000)
#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN (0x02000000)
#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME (0x08000000)
/* interrupt flags in INTA, set by uCode or hardware (e.g. dma), /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
* acknowledged (reset) by host writing "1" to flagged bits. */ * acknowledged (reset) by host writing "1" to flagged bits. */
...@@ -236,6 +242,8 @@ ...@@ -236,6 +242,8 @@
#define CSR39_ANA_PLL_CFG_VAL (0x01000000) #define CSR39_ANA_PLL_CFG_VAL (0x01000000)
#define CSR50_ANA_PLL_CFG_VAL (0x00880300) #define CSR50_ANA_PLL_CFG_VAL (0x00880300)
/* HPET MEM debug */
#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
/*=== HBUS (Host-side Bus) ===*/ /*=== HBUS (Host-side Bus) ===*/
#define HBUS_BASE (0x400) #define HBUS_BASE (0x400)
/* /*
......
...@@ -84,14 +84,16 @@ ...@@ -84,14 +84,16 @@
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) #define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) #define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000)
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
/** /**
* BSM (Bootstrap State Machine) * BSM (Bootstrap State Machine)
......
...@@ -3920,7 +3920,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw) ...@@ -3920,7 +3920,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw)
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta; struct ieee80211_if_sta *ifsta = &sdata->u.sta;
if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) || if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
(!ifsta->state == IEEE80211_IBSS_JOINED && (!(ifsta->state == IEEE80211_IBSS_JOINED) &&
!ieee80211_sta_active_ibss(dev))) !ieee80211_sta_active_ibss(dev)))
ieee80211_sta_find_ibss(dev, ifsta); ieee80211_sta_find_ibss(dev, ifsta);
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册