ARM: pxa: make more mach/*.h files local

Lots of header files are never included outside of a mach-pxa
directory and do not need to be made visible in include/mach,
so let's just move them all down one level.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Documentation/arm/pxa/mfp.txt

@@ -49,7 +49,7 @@ to this new MFP mechanism, here are several key points:
      internal controllers like PWM, SSP and UART, with 128 internal signals
      which can be routed to external through one or more MFPs (e.g. GPIO<0>
      can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
-     see arch/arm/mach-pxa/mach/include/mfp-pxa300.h)
+     see arch/arm/mach-pxa/mfp-pxa300.h)
 
   2. Alternate function configuration is removed from this GPIO controller,
      the remaining functions are pure GPIO-specific, i.e.
@@ -76,11 +76,11 @@ For board code writers, here are some guidelines:
 
 1. include ONE of the following header files in your <board>.c:
 
-   - #include <mach/mfp-pxa25x.h>
-   - #include <mach/mfp-pxa27x.h>
-   - #include <mach/mfp-pxa300.h>
-   - #include <mach/mfp-pxa320.h>
-   - #include <mach/mfp-pxa930.h>
+   - #include "mfp-pxa25x.h"
+   - #include "mfp-pxa27x.h"
+   - #include "mfp-pxa300.h"
+   - #include "mfp-pxa320.h"
+   - #include "mfp-pxa930.h"
 
    NOTE: only one file in your <board>.c, depending on the processors used,
    because pin configuration definitions may conflict in these file (i.e.
@@ -203,20 +203,20 @@ make them effective there-after.
     1. Unified pin definitions - enum constants for all configurable pins
     2. processor-neutral bit definitions for a possible MFP configuration
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+  - arch/arm/mach-pxa/mfp-pxa3xx.h
 
   for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
   configurations
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+  - arch/arm/mach-pxa/mfp-pxa2xx.h
 
   for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa300.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa320.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+  - arch/arm/mach-pxa/mfp-pxa25x.h
+    arch/arm/mach-pxa/mfp-pxa27x.h
+    arch/arm/mach-pxa/mfp-pxa300.h
+    arch/arm/mach-pxa/mfp-pxa320.h
+    arch/arm/mach-pxa/mfp-pxa930.h
 
   for processor specific definitions
 

arch/arm/mach-pxa/am200epd.c

@@ -30,8 +30,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa25x.h>
-#include <mach/gumstix.h>
+#include "pxa25x.h"
+#include "gumstix.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"

arch/arm/mach-pxa/am300epd.c

@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
+#include "gumstix.h"
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>
 

arch/arm/mach-pxa/balloon3.c

@@ -42,13 +42,13 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/balloon3.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 

arch/arm/mach-pxa/capc7117.c

@@ -29,8 +29,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/cm-x255.c

@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/cm-x270.c

@@ -21,7 +21,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 

arch/arm/mach-pxa/cm-x2xx.c

@@ -22,9 +22,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #undef GPIO24_SSP1_SFRM
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/smemc.h>

arch/arm/mach-pxa/cm-x300.c

@@ -47,8 +47,8 @@
 #include <asm/setup.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa300.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa300.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>

arch/arm/mach-pxa/colibri-evalboard.c

@@ -22,11 +22,11 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <asm/io.h>
 
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
+#include "pxa27x.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x-udc.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/colibri-pxa270-income.c

@@ -30,8 +30,8 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"

arch/arm/mach-pxa/colibri-pxa270.c

@@ -27,8 +27,8 @@
 #include <asm/sizes.h>
 
 #include <mach/audio.h>
-#include <mach/colibri.h>
-#include <mach/pxa27x.h>
+#include "colibri.h"
+#include "pxa27x.h"
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/colibri-pxa300.c

@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
-#include <mach/colibri.h>
+#include "pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/audio.h>

arch/arm/mach-pxa/colibri-pxa320.c

@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa320.h>
-#include <mach/colibri.h>
+#include "pxa320.h"
+#include "colibri.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
-#include <mach/colibri.h>
+#include "mfp-pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>

arch/arm/mach-pxa/corgi.c

@@ -48,12 +48,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <mach/corgi.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>

arch/arm/mach-pxa/corgi_pm.c

@@ -27,7 +27,7 @@
 
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/csb726.c

@@ -21,8 +21,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/csb726.h>
-#include <mach/pxa27x.h>
+#include "csb726.h"
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>

arch/arm/mach-pxa/include/mach/csb726.h → arch/arm/mach-pxa/csb726.h

@@ -11,7 +11,7 @@
 #ifndef CSB726_H
 #define CSB726_H
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53

arch/arm/mach-pxa/devices.c

@@ -6,7 +6,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>

arch/arm/mach-pxa/em-x270.c

@@ -39,8 +39,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>

arch/arm/mach-pxa/eseries.c

@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/eseries-gpio.h>
-#include <mach/eseries-irq.h>
+#include "eseries-irq.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 
 #include "devices.h"

arch/arm/mach-pxa/ezx.c

@@ -29,7 +29,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/hardware.h>

arch/arm/mach-pxa/gumstix.c

@@ -40,10 +40,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/gumstix.h>
+#include "udc.h"
+#include "gumstix.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/include/mach/gumstix.h → arch/arm/mach-pxa/gumstix.h

@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7

arch/arm/mach-pxa/h5000.c

@@ -30,9 +30,9 @@
 #include <asm/mach/map.h>
 #include <asm/irq.h>
 
-#include <mach/pxa25x.h>
-#include <mach/h5000.h>
-#include <mach/udc.h>
+#include "pxa25x.h"
+#include "h5000.h"
+#include "udc.h"
 #include <mach/smemc.h>
 
 #include "generic.h"

arch/arm/mach-pxa/include/mach/h5000.h → arch/arm/mach-pxa/h5000.h

@@ -18,7 +18,7 @@
 #ifndef __ASM_ARCH_H5000_H
 #define __ASM_ARCH_H5000_H
 
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 
 /*
  * CPU GPIOs

arch/arm/mach-pxa/himalaya.c

@@ -24,7 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/hx4700.c

@@ -44,7 +44,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/hx4700.h>
 #include <linux/platform_data/irda-pxaficp.h>
 

arch/arm/mach-pxa/icontrol.c

@@ -20,8 +20,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>

arch/arm/mach-pxa/idp.c

@@ -31,8 +31,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
+#include "pxa25x.h"
+#include "idp.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>

arch/arm/mach-pxa/include/mach/idp.h → arch/arm/mach-pxa/idp.h

@@ -23,7 +23,7 @@
  * IDP hardware.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)

arch/arm/mach-pxa/littleton.c

@@ -41,11 +41,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/littleton.h>
+#include "littleton.h"
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"

arch/arm/mach-pxa/lpd270.c

@@ -40,8 +40,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
-#include <mach/lpd270.h>
+#include "pxa27x.h"
+#include "lpd270.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>

arch/arm/mach-pxa/lubbock.c

@@ -47,14 +47,14 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/lubbock.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"

arch/arm/mach-pxa/magician.c

@@ -38,7 +38,7 @@
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/magician.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -48,9 +48,9 @@
 #include <linux/regulator/max1586.h>
 
 #include <linux/platform_data/pxa2xx_udc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
 
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include "devices.h"
 #include "generic.h"
 

arch/arm/mach-pxa/mainstone.c

@@ -46,7 +46,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>

arch/arm/mach-pxa/include/mach/mfp-pxa25x.h → arch/arm/mach-pxa/mfp-pxa25x.h

 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* GPIO */
 #define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)

arch/arm/mach-pxa/include/mach/mfp-pxa27x.h → arch/arm/mach-pxa/mfp-pxa27x.h

@@ -8,7 +8,7 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
  * bit is set, regardless of the GPIO configuration

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -21,7 +21,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/include/mach/mfp-pxa300.h → arch/arm/mach-pxa/mfp-pxa300.h

@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)

arch/arm/mach-pxa/include/mach/mfp-pxa320.h → arch/arm/mach-pxa/mfp-pxa320.h

@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)

arch/arm/mach-pxa/mfp-pxa3xx.c

@@ -20,7 +20,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 #include <mach/pxa3xx-regs.h>
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/include/mach/mfp-pxa930.h → arch/arm/mach-pxa/mfp-pxa930.h

@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)

arch/arm/mach-pxa/mioa701.c

@@ -47,19 +47,19 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/regs-rtc.h>
+#include "pxa27x.h"
+#include "regs-rtc.h"
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 #include <media/soc_camera.h>
 
-#include <mach/mioa701.h>
+#include "mioa701.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/mp900.c

@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include "generic.h"
 
 static void isp116x_pfm_delay(struct device *dev, int delay)

arch/arm/mach-pxa/mxm8x10.c

@@ -29,9 +29,9 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
-#include <mach/mxm8x10.h>
+#include "mxm8x10.h"
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/palm27x.c

@@ -28,14 +28,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/palmld.c

@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmld.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -40,7 +40,7 @@
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/palmt5.c

@@ -33,16 +33,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmt5.h>
+#include "palmt5.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/include/mach/palmt5.h → arch/arm/mach-pxa/palmt5.h

@@ -15,7 +15,7 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /** HERE ARE GPIOs **/
 

arch/arm/mach-pxa/palmtc.c

@@ -32,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/palmtc.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/palmte2.c

@@ -32,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
-#include <mach/palmte2.h>
+#include "palmte2.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
 
 #include "generic.h"

arch/arm/mach-pxa/palmtreo.c

@@ -31,20 +31,20 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
-#include <mach/palmtreo.h>
+#include "palmtreo.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <linux/platform_data/asoc-palm27x.h>
 #include <linux/platform_data/camera-pxa.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include <sound/pxa2xx-lib.h>
 

arch/arm/mach-pxa/palmtx.c

@@ -37,16 +37,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmtx.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/palmz72.c

@@ -37,18 +37,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmz72.h>
+#include "palmz72.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
-#include <mach/pm.h>
+#include "pm.h"
 #include <linux/platform_data/camera-pxa.h>
 
 #include <media/soc_camera.h>

arch/arm/mach-pxa/pcm027.c

@@ -30,8 +30,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pxa27x.h>
-#include <mach/pcm027.h>
+#include "pxa27x.h"
+#include "pcm027.h"
 #include "generic.h"
 
 /*

arch/arm/mach-pxa/include/mach/pcm027.h → arch/arm/mach-pxa/pcm027.h

@@ -23,7 +23,7 @@
  * Definitions of CPU card resources only
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -32,11 +32,11 @@
 
 #include <linux/platform_data/camera-pxa.h>
 #include <asm/mach/map.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pcm990_baseboard.h>
+#include "pcm990_baseboard.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"

arch/arm/mach-pxa/include/mach/pcm990_baseboard.h → arch/arm/mach-pxa/pcm990_baseboard.h

@@ -19,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <mach/pcm027.h>
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include "pcm027.h"
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990

arch/arm/mach-pxa/pm.c

@@ -16,7 +16,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 
-#include <mach/pm.h>
+#include "pm.h"
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 static unsigned long *sleep_save;

arch/arm/mach-pxa/poodle.c

@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <mach/poodle.h>
 #include <linux/platform_data/video-pxafb.h>

arch/arm/mach-pxa/pxa25x.c

@@ -30,9 +30,9 @@
 #include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/reset.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 

arch/arm/mach-pxa/include/mach/pxa25x.h → arch/arm/mach-pxa/pxa25x.h

@@ -3,7 +3,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 
 #endif /* __MACH_PXA25x_H */

arch/arm/mach-pxa/pxa27x.c

@@ -28,10 +28,10 @@
 #include <asm/irq.h>
 #include <asm/suspend.h>
 #include <mach/irqs.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 

arch/arm/mach-pxa/include/mach/pxa27x.h → arch/arm/mach-pxa/pxa27x.h

@@ -4,7 +4,7 @@
 #include <linux/suspend.h>
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include "mfp-pxa27x.h"
 #include <mach/irqs.h>
 
 #define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */

arch/arm/mach-pxa/pxa2xx.c

@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 

arch/arm/mach-pxa/pxa300.c

@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/include/mach/pxa300.h → arch/arm/mach-pxa/pxa300.h

 #ifndef __MACH_PXA300_H
 #define __MACH_PXA300_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa300.h>
+#include "pxa3xx.h"
+#include "mfp-pxa300.h"
 
 #endif /* __MACH_PXA300_H */

arch/arm/mach-pxa/pxa320.c

@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/include/mach/pxa320.h → arch/arm/mach-pxa/pxa320.h

 #ifndef __MACH_PXA320_H
 #define __MACH_PXA320_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa320.h>
+#include "pxa3xx.h"
+#include "mfp-pxa320.h"
 
 #endif /* __MACH_PXA320_H */
 

arch/arm/mach-pxa/pxa3xx-ulpi.c

@@ -26,7 +26,7 @@
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
-#include <mach/regs-u2d.h>
+#include "regs-u2d.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 struct pxa3xx_u2d_ulpi {

arch/arm/mach-pxa/pxa3xx.c

@@ -30,7 +30,7 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 #include <mach/irqs.h>

arch/arm/mach-pxa/pxa930.c

@@ -17,7 +17,7 @@
 #include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 
 #include "devices.h"
 

arch/arm/mach-pxa/include/mach/pxa930.h → arch/arm/mach-pxa/pxa930.h

 #ifndef __MACH_PXA930_H
 #define __MACH_PXA930_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
+#include "pxa3xx.h"
+#include "mfp-pxa930.h"
 
 #endif /* __MACH_PXA930_H */

arch/arm/mach-pxa/raumfeld.c

@@ -49,7 +49,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>

arch/arm/mach-pxa/saar.c

@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"

arch/arm/mach-pxa/sharpsl_pm.c

@@ -27,10 +27,10 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl_pm.h>
+#include "regs-rtc.h"
+#include "sharpsl_pm.h"
 
 /*
  * Constants

arch/arm/mach-pxa/spitz.c

@@ -40,15 +40,15 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"

arch/arm/mach-pxa/spitz_pm.c

@@ -25,8 +25,8 @@
 #include <mach/hardware.h>
 
 #include <mach/spitz.h>
-#include <mach/pxa27x.h>
-#include <mach/sharpsl_pm.h>
+#include "pxa27x.h"
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 

arch/arm/mach-pxa/stargate2.c

@@ -43,10 +43,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <mach/smemc.h>
 
 #include <linux/spi/spi.h>

arch/arm/mach-pxa/tavorevb.c

@@ -24,7 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/keypad-pxa27x.h>