staging:iio:magnetometer:ak8975: remove 'mode' attribute

The raw data reading process (ak8975_read_axis) sets the
single measurement mode to take a sample and once the
conversion is completed the device enters into power-down
mode automatically, therefore there is no need to enable
a flag for this to happen.
Signed-off-by: NLeed Aguilar <leed.aguilar@ti.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/iio/magnetometer/ak8975.c

@@ -92,7 +92,6 @@ struct ak8975_data {
 	struct mutex		lock;
 	u8			asa[3];
 	long			raw_to_gauss[3];
-	bool			mode;
 	u8			reg_cache[AK8975_MAX_REGS];
 	int			eoc_gpio;
 	int			eoc_irq;
@@ -247,60 +246,6 @@ static int ak8975_setup(struct i2c_client *client)
 	return 0;
 }
 
-/*
- * Shows the device's mode.  0 = off, 1 = on.
- */
-static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ak8975_data *data = iio_priv(indio_dev);
-
-	return sprintf(buf, "%u\n", data->mode);
-}
-
-/*
- * Sets the device's mode.  0 = off, 1 = on.  The device's mode must be on
- * for the magn raw attributes to be available.
- */
-static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
-			  const char *buf, size_t count)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ak8975_data *data = iio_priv(indio_dev);
-	struct i2c_client *client = data->client;
-	bool value;
-	int ret;
-
-	/* Convert mode string and do some basic sanity checking on it.
-	   only 0 or 1 are valid. */
-	ret = strtobool(buf, &value);
-	if (ret < 0)
-		return ret;
-
-	mutex_lock(&data->lock);
-
-	/* Write the mode to the device. */
-	if (data->mode != value) {
-		ret = ak8975_write_data(client,
-					AK8975_REG_CNTL,
-					(u8)value,
-					AK8975_REG_CNTL_MODE_MASK,
-					AK8975_REG_CNTL_MODE_SHIFT);
-
-		if (ret < 0) {
-			dev_err(&client->dev, "Error in setting mode\n");
-			mutex_unlock(&data->lock);
-			return ret;
-		}
-		data->mode = value;
-	}
-
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
 static int wait_conversion_complete_gpio(struct ak8975_data *data)
 {
 	struct i2c_client *client = data->client;
@@ -368,12 +313,6 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 
 	mutex_lock(&data->lock);
 
-	if (data->mode == 0) {
-		dev_err(&client->dev, "Operating mode is in power down mode\n");
-		ret = -EBUSY;
-		goto exit;
-	}
-
 	/* Set up the device for taking a sample. */
 	ret = ak8975_write_data(client,
 				AK8975_REG_CNTL,
@@ -465,19 +404,7 @@ static const struct iio_chan_spec ak8975_channels[] = {
 	AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2),
 };
 
-static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, show_mode, store_mode, 0);
-
-static struct attribute *ak8975_attr[] = {
-	&iio_dev_attr_mode.dev_attr.attr,
-	NULL
-};
-
-static struct attribute_group ak8975_attr_group = {
-	.attrs = ak8975_attr,
-};
-
 static const struct iio_info ak8975_info = {
-	.attrs = &ak8975_attr_group,
 	.read_raw = &ak8975_read_raw,
 	.driver_module = THIS_MODULE,
 };