ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data

'psize' is used to calculate the maximum DMA burst size. However it
is only taken into consideration when editing the DMA channel's
configuration. The Audio DMA platform data is only used to allocate
a channel, not configure it. That will be done at a later date within
the MSP driver.

We're also removing comments which are no longer required, as
'data_width' is no longer set in any device's platform data period.
Tested-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/board-mop500-audio.c

@@ -22,25 +22,13 @@
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
-
 	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
 };
 
 static struct stedma40_chan_cfg msp0_dma_tx = {
 	.high_priority = true,
 	.dir = STEDMA40_MEM_TO_PERIPH,
-
 	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
 };
 
 struct msp_i2s_platform_data msp0_platform_data = {
@@ -52,25 +40,13 @@ struct msp_i2s_platform_data msp0_platform_data = {
 static struct stedma40_chan_cfg msp1_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
-
 	.dev_type = DB8500_DMA_DEV30_MSP3,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
 };
 
 static struct stedma40_chan_cfg msp1_dma_tx = {
 	.high_priority = true,
 	.dir = STEDMA40_MEM_TO_PERIPH,
-
 	.dev_type = DB8500_DMA_DEV30_MSP1,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
 };
 
 struct msp_i2s_platform_data msp1_platform_data = {
@@ -82,29 +58,15 @@ struct msp_i2s_platform_data msp1_platform_data = {
 static struct stedma40_chan_cfg msp2_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
-
 	.dev_type = DB8500_DMA_DEV14_MSP2,
-
-	/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
-	/* data_width is set during configuration */
 };
 
 static struct stedma40_chan_cfg msp2_dma_tx = {
 	.high_priority = true,
 	.dir = STEDMA40_MEM_TO_PERIPH,
-
 	.dev_type = DB8500_DMA_DEV14_MSP2,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
 	.use_fixed_channel = true,
 	.phy_channel = 1,
-
-	/* data_width is set during configuration */
 };
 
 static struct platform_device *db8500_add_msp_i2s(struct device *parent,