sh: Support early IRQ vector map reservation for delayed controllers.

Some controllers will need to be initialized lazily due to pinmux
constraints, while others may simply have no need to be brought online if
there are no backing devices for them attached. In this case it's still
necessary to be able to reserve their hardware vector map before dynamic
IRQs get a hold of them.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-x3proto/setup.c

@@ -129,8 +129,22 @@ static struct platform_device *x3proto_devices[] __initdata = {
 	&m66592_usb_peripheral_device,
 };
 
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
 static int __init x3proto_devices_setup(void)
 {
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
 	r8a66597_usb_host_resources[1].start =
 		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
 
@@ -145,14 +159,6 @@ static int __init x3proto_devices_setup(void)
 }
 device_initcall(x3proto_devices_setup);
 
-static void __init x3proto_init_irq(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
-	/* Set ICR0.LVLMODE */
-	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
 static void __init x3proto_setup(char **cmdline_p)
 {
 	register_smp_ops(&shx3_smp_ops);
@@ -161,5 +167,4 @@ static void __init x3proto_setup(char **cmdline_p)
 static struct sh_machine_vector mv_x3proto __initmv = {
 	.mv_name		= "x3proto",
 	.mv_setup		= x3proto_setup,
-	.mv_init_irq		= x3proto_init_irq,
 };

arch/sh/kernel/cpu/sh4a/setup-shx3.c

@@ -478,6 +478,9 @@ void __init plat_irq_setup_pins(int mode)
 
 void __init plat_irq_setup(void)
 {
+	reserve_intc_vectors(vectors_irq, ARRAY_SIZE(vectors_irq));
+	reserve_intc_vectors(vectors_irl, ARRAY_SIZE(vectors_irl));
+
 	register_intc_controller(&intc_desc);
 }
 

drivers/sh/intc.c

@@ -1377,6 +1377,17 @@ int reserve_irq_vector(unsigned int irq)
 	return ret;
 }
 
+void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	for (i = 0; i < nr_vecs; i++)
+		__set_bit(evt2irq(vectors[i].vect), intc_irq_map);
+	spin_unlock_irqrestore(&vector_lock, flags);
+}
+
 void reserve_irq_legacy(void)
 {
 	unsigned long flags;

include/linux/sh_intc.h

@@ -106,6 +106,7 @@ struct intc_desc symbol __initdata = {					\
 }
 
 int __init register_intc_controller(struct intc_desc *desc);
+void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs);
 int intc_set_priority(unsigned int irq, unsigned int prio);
 
 #ifdef CONFIG_INTC_USERIMASK