3C359: use request_firmware

Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

drivers/net/tokenring/3c359.c

@@ -62,6 +62,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
+#include <linux/firmware.h>
 
 #include <net/checksum.h>
 
@@ -73,8 +74,10 @@
 static char version[] __devinitdata  = 
 "3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ; 
 
+#define FW_NAME		"3com/3C359.bin"
 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
+MODULE_FIRMWARE(FW_NAME);
 
 /* Module paramters */
 
@@ -114,8 +117,6 @@ MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
  *	will be stuck with 1555 lines of hex #'s in the code.
  */
 
-#include "3c359_microcode.h" 
-
 static struct pci_device_id xl_pci_tbl[] =
 {
 	{PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
@@ -364,10 +365,30 @@ static int __devinit xl_probe(struct pci_dev *pdev,
 	return 0; 
 }
 
+static int xl_init_firmware(struct xl_private *xl_priv)
+{
+	int err;
+
+	err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev);
+	if (err) {
+		printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME);
+		return err;
+	}
+
+	if (xl_priv->fw->size < 16) {
+		printk(KERN_ERR "Bogus length %zu in \"%s\"\n",
+		       xl_priv->fw->size, FW_NAME);
+		release_firmware(xl_priv->fw);
+		err = -EINVAL;
+	}
+
+	return err;
+}
 
 static int __devinit xl_init(struct net_device *dev) 
 {
 	struct xl_private *xl_priv = netdev_priv(dev);
+	int err;
 
 	printk(KERN_INFO "%s \n", version);
 	printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
@@ -375,8 +396,11 @@ static int __devinit xl_init(struct net_device *dev)
 
 	spin_lock_init(&xl_priv->xl_lock) ; 
 
-	return xl_hw_reset(dev) ; 
+	err = xl_init_firmware(xl_priv);
+	if (err == 0)
+		err = xl_hw_reset(dev);
 
+	return err;
 }
 
 
@@ -386,7 +410,7 @@ static int __devinit xl_init(struct net_device *dev)
  */
 
 static int xl_hw_reset(struct net_device *dev) 
-{ 
+{
 	struct xl_private *xl_priv = netdev_priv(dev);
 	u8 __iomem *xl_mmio = xl_priv->xl_mmio ; 
 	unsigned long t ; 
@@ -396,6 +420,9 @@ static int xl_hw_reset(struct net_device *dev)
 	u16 start ; 
 	int j ;
 
+	if (xl_priv->fw == NULL)
+		return -EINVAL;
+
 	/*
 	 *  Reset the card.  If the card has got the microcode on board, we have 
          *  missed the initialization interrupt, so we must always do this.
@@ -458,25 +485,30 @@ static int xl_hw_reset(struct net_device *dev)
 
 		/* 
 		 * Now to write the microcode into the shared ram 
-	 	 * The microcode must finish at position 0xFFFF, so we must subtract
-		 * to get the start position for the code
+	 	 * The microcode must finish at position 0xFFFF,
+	 	 * so we must subtract to get the start position for the code
+	 	 *
+		 * Looks strange but ensures compiler only uses
+		 * 16 bit unsigned int
 		 */
+		start = (0xFFFF - (xl_priv->fw->size) + 1) ;
 
-		start = (0xFFFF - (mc_size) + 1 ) ; /* Looks strange but ensures compiler only uses 16 bit unsigned int for this */ 
-		
 		printk(KERN_INFO "3C359: Uploading Microcode: "); 
-		
-		for (i = start, j = 0; j < mc_size; i++, j++) { 
-			writel(MEM_BYTE_WRITE | 0XD0000 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; 
-			writeb(microcode[j],xl_mmio + MMIO_MACDATA) ; 
+
+		for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) {
+			writel(MEM_BYTE_WRITE | 0XD0000 | i,
+			       xl_mmio + MMIO_MAC_ACCESS_CMD);
+			writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA);
 			if (j % 1024 == 0)
 				printk(".");
 		}
 		printk("\n") ; 
 
-		for (i=0;i < 16; i++) { 
-			writel( (MEM_BYTE_WRITE | 0xDFFF0) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; 
-			writeb(microcode[mc_size - 16 + i], xl_mmio + MMIO_MACDATA) ; 
+		for (i = 0; i < 16; i++) {
+			writel((MEM_BYTE_WRITE | 0xDFFF0) + i,
+			       xl_mmio + MMIO_MAC_ACCESS_CMD);
+			writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i],
+			       xl_mmio + MMIO_MACDATA);
 		}
 
 		/*
@@ -1782,6 +1814,7 @@ static void __devexit xl_remove_one (struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct xl_private *xl_priv=netdev_priv(dev);
 	
+	release_firmware(xl_priv->fw);
 	unregister_netdev(dev);
 	iounmap(xl_priv->xl_mmio) ; 
 	pci_release_regions(pdev) ; 

drivers/net/tokenring/3c359.h

@@ -284,5 +284,8 @@ struct xl_private {
 	u8 xl_laa[6] ; 
 	u32 rx_ring_dma_addr ; 
 	u32 tx_ring_dma_addr ; 
+
+	/* firmware section */
+	const struct firmware *fw;
 };
 

firmware/Makefile

@@ -26,6 +26,7 @@ fw-shipped- += acenic/tg1.bin
 else
 acenic-objs := acenic/tg1.bin acenic/tg2.bin
 endif
+fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
 fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
 fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin

firmware/WHENCE

@@ -505,3 +505,29 @@ Licence:
 Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
+
+Driver: 3C359 - 3Com 3C359 Token Link Velocity XL adapter
+
+File: 3com/3C359.bin
+
+Licence:
+/*
+ * The firmware this driver downloads into the tokenring card is a
+ * separate program and is not GPL'd source code, even though the Linux
+ * side driver and the routine that loads this data into the card are.
+ *
+ * This firmware is licensed to you strictly for use in conjunction
+ * with the use of 3Com 3C359 TokenRing adapters. There is no
+ * waranty expressed or implied about its fitness for any purpose.
+ */
+/* 3c359_microcode.mac: 3Com 3C359 Tokenring microcode.
+ *
+ * Notes:
+ *  - Loaded from xl_init upon adapter initialization.
+ *
+ * Available from 3Com as part of their standard 3C359 driver.
+ */
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------