mmc: msm_sdcc: Use MCI_INT_MASK0 for PIO interrupts

Not all targets have IRQ1 line routed from the SD controller to
the processor. So we cannot rely on IRQ1 for PIO interrupts.
This patch moves all PIO interrupts to IRQ0 and enables the PIO
mode.
Signed-off-by: NMurali Palnati <palnatim@codeaurora.org>
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

drivers/mmc/host/msm_sdcc.c

@@ -213,7 +213,8 @@ msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd)
 	msmsdcc_writel(host, host->cmd_timeout, MMCIDATATIMER);
 	msmsdcc_writel(host, (unsigned int)host->curr.xfer_size,
 		       MMCIDATALENGTH);
-	msmsdcc_writel(host, host->cmd_pio_irqmask, MMCIMASK1);
+	msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+			(~MCI_IRQ_PIO)) | host->cmd_pio_irqmask, MMCIMASK0);
 	msmsdcc_writel(host, host->cmd_datactrl, MMCIDATACTRL);
 
 	if (host->cmd_cmd) {
@@ -543,7 +544,9 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data,
 
 		msmsdcc_writel(host, host->curr.xfer_size, MMCIDATALENGTH);
 
-		msmsdcc_writel(host, pio_irqmask, MMCIMASK1);
+		msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+				(~MCI_IRQ_PIO)) | pio_irqmask, MMCIMASK0);
+
 		msmsdcc_writel(host, datactrl, MMCIDATACTRL);
 
 		if (cmd) {
@@ -659,8 +662,13 @@ msmsdcc_pio_irq(int irq, void *dev_id)
 {
 	struct msmsdcc_host	*host = dev_id;
 	uint32_t		status;
+	u32 mci_mask0;
 
 	status = msmsdcc_readl(host, MMCISTATUS);
+	mci_mask0 = msmsdcc_readl(host, MMCIMASK0);
+
+	if (((mci_mask0 & status) & MCI_IRQ_PIO) == 0)
+		return IRQ_NONE;
 
 	do {
 		unsigned long flags;
@@ -719,10 +727,12 @@ msmsdcc_pio_irq(int irq, void *dev_id)
 	} while (1);
 
 	if (status & MCI_RXACTIVE && host->curr.xfer_remain < MCI_FIFOSIZE)
-		msmsdcc_writel(host, MCI_RXDATAAVLBLMASK, MMCIMASK1);
+		msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) |
+					MCI_RXDATAAVLBLMASK, MMCIMASK0);
 
 	if (!host->curr.xfer_remain)
-		msmsdcc_writel(host, 0, MMCIMASK1);
+		msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | 0,
+					MMCIMASK0);
 
 	return IRQ_HANDLED;
 }
@@ -854,6 +864,8 @@ msmsdcc_irq(int irq, void *dev_id)
 	do {
 		status = msmsdcc_readl(host, MMCISTATUS);
 		status &= msmsdcc_readl(host, MMCIMASK0);
+		if ((status & (~MCI_IRQ_PIO)) == 0)
+			break;
 		msmsdcc_writel(host, status, MMCICLEAR);
 
 		if (status & MCI_SDIOINTR)

drivers/mmc/host/msm_sdcc.h

@@ -140,6 +140,11 @@
 	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
 	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK)
 
+#define MCI_IRQ_PIO \
+	(MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \
+	 MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \
+	 MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \
+	 MCI_RXACTIVEMASK | MCI_TXACTIVEMASK)
 /*
  * The size of the FIFO in bytes.
  */