[PATCH] i4l: add Olitec ISDN PCI card in hisax gazel driver

This patch adds support for the Olitec ISDN PCI card in the hisax gazel
driver.  The gazel driver supports this card, but wasn't aware of its PCI
ids.  Users used to modify the PCI ids of a supported card in
include/linux/pci_ids.h and recompile their kernel to get this card
running, as said in most Howtos.  This patch makes the hisax gazel driver
recognize the PCI ids of the Olitec ISDN PCI card.
Signed-off-by: NOlivier Blin <oblin@mandriva.com>
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/isdn/hisax/config.c

@@ -1900,6 +1900,7 @@ static struct pci_device_id hisax_pci_tbl[] __initdata = {
 	{PCI_VENDOR_ID_PLX,      PCI_DEVICE_ID_PLX_R685,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_PLX,      PCI_DEVICE_ID_PLX_R753,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_PLX,      PCI_DEVICE_ID_PLX_DJINN_ITOO,   PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_PLX,      PCI_DEVICE_ID_PLX_OLITEC,       PCI_ANY_ID, PCI_ANY_ID},
 #endif
 #ifdef CONFIG_HISAX_QUADRO
 	{PCI_VENDOR_ID_PLX,      PCI_DEVICE_ID_PLX_9050,         PCI_ANY_ID, PCI_ANY_ID},

drivers/isdn/hisax/gazel.c

@@ -546,8 +546,9 @@ setup_gazelpci(struct IsdnCardState *cs)
 
 	found = 0;
 	seekcard = PCI_DEVICE_ID_PLX_R685;
-	for (nbseek = 0; nbseek < 3; nbseek++) {
-		if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX, seekcard, dev_tel))) {
+	for (nbseek = 0; nbseek < 4; nbseek++) {
+		if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX,
+					seekcard, dev_tel))) {
 			if (pci_enable_device(dev_tel))
 				return 1;
 			pci_irq = dev_tel->irq;
@@ -565,6 +566,9 @@ setup_gazelpci(struct IsdnCardState *cs)
 				case PCI_DEVICE_ID_PLX_R753:
 					seekcard = PCI_DEVICE_ID_PLX_DJINN_ITOO;
 					break;
+				case PCI_DEVICE_ID_PLX_DJINN_ITOO:
+					seekcard = PCI_DEVICE_ID_PLX_OLITEC;
+					break;
 			}
 		}
 	}
@@ -605,6 +609,7 @@ setup_gazelpci(struct IsdnCardState *cs)
 			break;
 		case PCI_DEVICE_ID_PLX_R753:
 		case PCI_DEVICE_ID_PLX_DJINN_ITOO:
+		case PCI_DEVICE_ID_PLX_OLITEC:
 			printk(KERN_INFO "Gazel: Card PCI R753 found\n");
 			cs->subtyp = R753;
 			test_and_set_bit(HW_IPAC, &cs->HW_Flags);

include/linux/pci_ids.h

@@ -1020,6 +1020,7 @@
 #define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
 #define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
 #define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_OLITEC	0x1187
 #define PCI_DEVICE_ID_PLX_9030		0x9030
 #define PCI_DEVICE_ID_PLX_9050		0x9050
 #define PCI_DEVICE_ID_PLX_9060		0x9060