MIPS: mscc: Add switch to ocelot

Ocelot has an integrated switch, add support for it.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: NJames Hogan <jhogan@kernel.org>

arch/mips/boot/dts/mscc/ocelot.dtsi

@@ -91,6 +91,72 @@
 			status = "disabled";
 		};
 
+		switch@1010000 {
+			compatible = "mscc,vsc7514-switch";
+			reg = <0x1010000 0x10000>,
+			      <0x1030000 0x10000>,
+			      <0x1080000 0x100>,
+			      <0x10d0000 0x10000>,
+			      <0x11e0000 0x100>,
+			      <0x11f0000 0x100>,
+			      <0x1200000 0x100>,
+			      <0x1210000 0x100>,
+			      <0x1220000 0x100>,
+			      <0x1230000 0x100>,
+			      <0x1240000 0x100>,
+			      <0x1250000 0x100>,
+			      <0x1260000 0x100>,
+			      <0x1270000 0x100>,
+			      <0x1280000 0x100>,
+			      <0x1800000 0x80000>,
+			      <0x1880000 0x10000>;
+			reg-names = "sys", "rew", "qs", "hsio", "port0",
+				    "port1", "port2", "port3", "port4", "port5",
+				    "port6", "port7", "port8", "port9", "port10",
+				    "qsys", "ana";
+			interrupts = <21 22>;
+			interrupt-names = "xtr", "inj";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+				};
+				port1: port@1 {
+					reg = <1>;
+				};
+				port2: port@2 {
+					reg = <2>;
+				};
+				port3: port@3 {
+					reg = <3>;
+				};
+				port4: port@4 {
+					reg = <4>;
+				};
+				port5: port@5 {
+					reg = <5>;
+				};
+				port6: port@6 {
+					reg = <6>;
+				};
+				port7: port@7 {
+					reg = <7>;
+				};
+				port8: port@8 {
+					reg = <8>;
+				};
+				port9: port@9 {
+					reg = <9>;
+				};
+				port10: port@10 {
+					reg = <10>;
+				};
+			};
+		};
+
 		reset@1070008 {
 			compatible = "mscc,ocelot-chip-reset";
 			reg = <0x1070008 0x4>;
@@ -113,5 +179,27 @@
 				function = "uart2";
 			};
 		};
+
+		mdio0: mdio@107009c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,ocelot-miim";
+			reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+			interrupts = <14>;
+			status = "disabled";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
 	};
 };