提交 49198b37 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.12: Critical fixes

- Move the code to increase the sg seg count for LP21000 adapters.
- Check pcmd on command completion before dereferencing it.
- Clear queue memory when creating firmware queues to prevent stale entries.
- Replace the use of PAGE_SIZE in many areas that assumed it was always 4k.
- Add an else clause to a conditional that needed to unlock the hba_lock.
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 6c8eea54
......@@ -2591,7 +2591,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
goto job_done;
}
mb = kzalloc(PAGE_SIZE, GFP_KERNEL);
mb = kzalloc(BSG_MBOX_SIZE, GFP_KERNEL);
if (!mb) {
rc = -ENOMEM;
goto job_done;
......@@ -2665,13 +2665,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
INIT_LIST_HEAD(&rxbmp->list);
rxbpl = (struct ulp_bde64 *) rxbmp->virt;
dmp = diag_cmd_data_alloc(phba, rxbpl, PAGE_SIZE, 0);
dmp = diag_cmd_data_alloc(phba, rxbpl, BSG_MBOX_SIZE, 0);
if (!dmp) {
rc = -ENOMEM;
goto job_done;
}
dmp->size = PAGE_SIZE;
INIT_LIST_HEAD(&dmp->dma.list);
pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh =
putPaddrHigh(dmp->dma.phys);
......@@ -2774,12 +2773,12 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job)
goto job_error;
}
if (job->request_payload.payload_len != PAGE_SIZE) {
if (job->request_payload.payload_len != BSG_MBOX_SIZE) {
rc = -EINVAL;
goto job_error;
}
if (job->reply_payload.payload_len != PAGE_SIZE) {
if (job->reply_payload.payload_len != BSG_MBOX_SIZE) {
rc = -EINVAL;
goto job_error;
}
......
......@@ -91,6 +91,7 @@ struct get_mgmt_rev_reply {
struct MgmtRevInfo info;
};
#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
struct dfc_mbox_req {
uint32_t command;
uint32_t mbOffset;
......
......@@ -5370,7 +5370,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba,
sizeof(struct lpfc_name));
pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
cmdiocbp->context2)->virt);
lsrjt_event.command = *pcmd;
lsrjt_event.command = (pcmd != NULL) ? *pcmd : 0;
stat.un.lsRjtError = be32_to_cpu(rspiocbp->iocb.un.ulpWord[4]);
lsrjt_event.reason_code = stat.un.b.lsRjtRsnCode;
lsrjt_event.explanation = stat.un.b.lsRjtRsnCodeExp;
......
......@@ -2600,15 +2600,6 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
init_timer(&vport->els_tmofunc);
vport->els_tmofunc.function = lpfc_els_timeout;
vport->els_tmofunc.data = (unsigned long)vport;
if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
phba->menlo_flag |= HBA_MENLO_SUPPORT;
/* check for menlo minimum sg count */
if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) {
phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
shost->sg_tablesize = phba->cfg_sg_seg_cnt;
}
}
error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
if (error)
goto out_put_shost;
......@@ -3852,6 +3843,13 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
/* Get all the module params for configuring this host */
lpfc_get_cfgparam(phba);
if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
phba->menlo_flag |= HBA_MENLO_SUPPORT;
/* check for menlo minimum sg count */
if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT)
phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
}
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
......
......@@ -1611,7 +1611,7 @@ lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
for (sgentry = 0; sgentry < sgecount; sgentry++) {
lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
mbox->sge_array->addr[sgentry], phyaddr);
}
/* Free the sge address array memory */
......@@ -1669,7 +1669,7 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
}
/* Setup for the none-embedded mbox command */
pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
pcount = (PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
/* Allocate record for keeping SGE virtual addresses */
......@@ -1684,24 +1684,24 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
/* The DMA memory is always allocated in the length of a
* page even though the last SGE might not fill up to a
* page, this is used as a priori size of PAGE_SIZE for
* page, this is used as a priori size of SLI4_PAGE_SIZE for
* the later DMA memory free.
*/
viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
viraddr = dma_alloc_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
&phyaddr, GFP_KERNEL);
/* In case of malloc fails, proceed with whatever we have */
if (!viraddr)
break;
memset(viraddr, 0, PAGE_SIZE);
memset(viraddr, 0, SLI4_PAGE_SIZE);
mbox->sge_array->addr[pagen] = viraddr;
/* Keep the first page for later sub-header construction */
if (pagen == 0)
cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
resid_len = length - alloc_len;
if (resid_len > PAGE_SIZE) {
if (resid_len > SLI4_PAGE_SIZE) {
lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
PAGE_SIZE);
alloc_len += PAGE_SIZE;
SLI4_PAGE_SIZE);
alloc_len += SLI4_PAGE_SIZE;
} else {
lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
resid_len);
......
......@@ -4296,7 +4296,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
"2570 Failed to read FCoE parameters\n");
/* Issue READ_REV to collect vpd and FW information. */
vpd_size = PAGE_SIZE;
vpd_size = SLI4_PAGE_SIZE;
vpd = kzalloc(vpd_size, GFP_KERNEL);
if (!vpd) {
rc = -ENOMEM;
......@@ -7136,13 +7136,11 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
*/
list_del_init(&abort_iocb->list);
pring->txcmplq_cnt--;
spin_unlock_irq(&phba->hbalock);
/* Firmware could still be in progress of DMAing
* payload, so don't free data buffer till after
* a hbeat.
*/
spin_lock_irq(&phba->hbalock);
abort_iocb->iocb_flag |= LPFC_DELAY_MEM_FREE;
abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED;
spin_unlock_irq(&phba->hbalock);
......@@ -7150,7 +7148,8 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
abort_iocb->iocb.un.ulpWord[4] = IOERR_ABORT_REQUESTED;
(abort_iocb->iocb_cmpl)(phba, abort_iocb, abort_iocb);
}
} else
spin_unlock_irq(&phba->hbalock);
}
lpfc_sli_release_iocbq(phba, cmdiocb);
......@@ -9544,7 +9543,7 @@ lpfc_sli4_queue_free(struct lpfc_queue *queue)
while (!list_empty(&queue->page_list)) {
list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
list);
dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
dma_free_coherent(&queue->phba->pcidev->dev, SLI4_PAGE_SIZE,
dmabuf->virt, dmabuf->phys);
kfree(dmabuf);
}
......@@ -9572,7 +9571,6 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
void *dma_pointer;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
......@@ -9647,6 +9645,10 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
uint16_t dmult;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
......@@ -9696,6 +9698,7 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
break;
}
list_for_each_entry(dmabuf, &eq->page_list, list) {
memset(dmabuf->virt, 0, hw_page_size);
eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
putPaddrLow(dmabuf->phys);
eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
......@@ -9758,6 +9761,11 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
int rc, length, status = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
......@@ -9795,6 +9803,7 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
break;
}
list_for_each_entry(dmabuf, &cq->page_list, list) {
memset(dmabuf->virt, 0, hw_page_size);
cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
putPaddrLow(dmabuf->phys);
cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
......@@ -9924,7 +9933,10 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
int rc, length, status = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
......@@ -9973,6 +9985,7 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
break;
}
list_for_each_entry(dmabuf, &mq->page_list, list) {
memset(dmabuf->virt, 0, hw_page_size);
mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_lo =
putPaddrLow(dmabuf->phys);
mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_hi =
......@@ -10054,6 +10067,10 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
int rc, length, status = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
......@@ -10069,6 +10086,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
cq->queue_id);
list_for_each_entry(dmabuf, &wq->page_list, list) {
memset(dmabuf->virt, 0, hw_page_size);
wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
putPaddrLow(dmabuf->phys);
wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
......@@ -10137,6 +10155,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
int rc, length, status = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
if (!phba->sli4_hba.pc_sli4_params.supported)
hw_page_size = SLI4_PAGE_SIZE;
if (hrq->entry_count != drq->entry_count)
return -EINVAL;
......@@ -10181,6 +10203,7 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
LPFC_HDR_BUF_SIZE);
list_for_each_entry(dmabuf, &hrq->page_list, list) {
memset(dmabuf->virt, 0, hw_page_size);
rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
putPaddrLow(dmabuf->phys);
rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
......@@ -10753,7 +10776,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > PAGE_SIZE) {
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2559 Block sgl registration required DMA "
"size (%d) great than a page\n", reqlen);
......@@ -10859,7 +10882,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
/* Calculate the requested length of the dma memory */
reqlen = cnt * sizeof(struct sgl_page_pairs) +
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > PAGE_SIZE) {
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0217 Block sgl registration required DMA "
"size (%d) great than a page\n", reqlen);
......@@ -11695,8 +11718,8 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
*
* This routine is invoked to post rpi header templates to the
* HBA consistent with the SLI-4 interface spec. This routine
* posts a PAGE_SIZE memory region to the port to hold up to
* PAGE_SIZE modulo 64 rpi context headers.
* posts a SLI4_PAGE_SIZE memory region to the port to hold up to
* SLI4_PAGE_SIZE modulo 64 rpi context headers.
*
* This routine does not require any locks. It's usage is expected
* to be driver load or reset recovery when the driver is
......@@ -11799,8 +11822,8 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
*
* This routine is invoked to post rpi header templates to the
* HBA consistent with the SLI-4 interface spec. This routine
* posts a PAGE_SIZE memory region to the port to hold up to
* PAGE_SIZE modulo 64 rpi context headers.
* posts a SLI4_PAGE_SIZE memory region to the port to hold up to
* SLI4_PAGE_SIZE modulo 64 rpi context headers.
*
* Returns
* A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册