RapidIO: add mport driver for Tsi721 bridge

Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device.
 The driver provides full set of callback functions defined for mport
devices in RapidIO subsystem.  It also is compatible with current version
of RIONET driver (Ethernet over RapidIO messaging services).

This patch is applicable to kernel versions starting from 2.6.39.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NChul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/rapidio/tsi721.txt

+RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
+=========================================================================
+
+I. Overview
+
+This driver implements all currently defined RapidIO mport callback functions.
+It supports maintenance read and write operations, inbound and outbound RapidIO
+doorbells, inbound maintenance port-writes and RapidIO messaging.
+
+To generate SRIO maintenance transactions this driver uses one of Tsi721 DMA
+channels. This mechanism provides access to larger range of hop counts and
+destination IDs without need for changes in outbound window translation.
+
+RapidIO messaging support uses dedicated messaging channels for each mailbox.
+For inbound messages this driver uses destination ID matching to forward messages
+into the corresponding message queue. Messaging callbacks are implemented to be
+fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
+
+II. Known problems
+
+  None.
+
+III. To do
+
+ Add DMA data transfers (non-messaging).
+ Add inbound region (SRIO-to-PCIe) mapping.
+
+IV. Version History
+
+  1.0.0 - Initial driver release.
+
+V.  License
+-----------------------------------------------
+
+  Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License as published by the Free
+  Software Foundation; either version 2 of the License, or (at your option)
+  any later version.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

drivers/rapidio/Kconfig

 #
 # RapidIO configuration
 #
+source "drivers/rapidio/devices/Kconfig"
+
 config RAPIDIO_DISC_TIMEOUT
 	int "Discovery timeout duration (seconds)"
 	depends on RAPIDIO
@@ -20,8 +22,6 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
 	  ports for Input/Output direction to allow other traffic
 	  than Maintenance transfers.
 
-source "drivers/rapidio/switches/Kconfig"
-
 config RAPIDIO_DEBUG
 	bool "RapidIO subsystem debug messages"
 	depends on RAPIDIO
@@ -32,3 +32,5 @@ config RAPIDIO_DEBUG
 	  going on.
 
 	  If you are unsure about this, say N here.
+
+source "drivers/rapidio/switches/Kconfig"

drivers/rapidio/Makefile

@@ -4,5 +4,6 @@
 obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
+obj-$(CONFIG_RAPIDIO)		+= devices/
 
 subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG

drivers/rapidio/devices/Kconfig

+#
+# RapidIO master port configuration
+#
+
+config RAPIDIO_TSI721
+	bool "IDT Tsi721 PCI Express SRIO Controller support"
+	depends on RAPIDIO && PCIEPORTBUS
+	default "n"
+	---help---
+	  Include support for IDT Tsi721 PCI Express Serial RapidIO controller.

drivers/rapidio/devices/Makefile

+#
+# Makefile for RapidIO devices
+#
+
+obj-$(CONFIG_RAPIDIO_TSI721)	+= tsi721.o

include/linux/rio_ids.h

@@ -39,5 +39,6 @@
 #define RIO_DID_IDTCPS1616		0x0379
 #define RIO_DID_IDTVPS1616		0x0377
 #define RIO_DID_IDTSPS1616		0x0378
+#define RIO_DID_TSI721			0x80ab
 
 #endif				/* LINUX_RIO_IDS_H */