netxen: deinline and sparse fix

Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.

Compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/net/netxen/netxen_nic.h

@@ -1097,109 +1097,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
-static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
-{
-	uint32_t	mask = 0x7ff;
-	int retries = 32;
-
-	DPRINTK(1, INFO, "Entered ISR Disable \n");
-
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
-	}
-
-	/* Window = 0 or 1 */
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-		do {
-			writel(0xffffffff, (void *)
-				(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS)));
-			mask = readl((void *)
-					(pci_base_offset(adapter, ISR_INT_VECTOR)));
-			if (!(mask & 0x80))
-				break;
-			udelay(10);
-		} while (--retries);
-
-		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
-					netxen_nic_driver_name);
-		}
-	}
-
-	DPRINTK(1, INFO, "Done with Disable Int\n");
-
-	return;
-}
-
-static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
-{
-	u32 mask;
-
-	DPRINTK(1, INFO, "Entered ISR Enable \n");
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			mask  =  0x77b;
-			break;
-		case NETXEN_NIC_XGBE:
-			mask  =  0x77f;
-			break;
-		default:
-			mask  =  0x7ff;
-			break;
-		}
-
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
-	}
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
-
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-		mask = 0xbff;
-		if (adapter->intr_scheme != -1 &&
-			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-			writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
-		}
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK)));
-	}
-
-	DPRINTK(1, INFO, "Done with enable Int\n");
-
-	return;
-}
 
 /*
  * NetXen Board information

drivers/net/netxen/netxen_nic_main.c

@@ -156,6 +156,103 @@ static inline void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter
 #define	ADAPTER_LIST_SIZE 12
 int netxen_cards_found;
 
+static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+{
+	uint32_t	mask = 0x7ff;
+	int retries = 32;
+
+	DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+	switch (adapter->portnum) {
+	case 0:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+		break;
+	case 1:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+		break;
+	case 2:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+		break;
+	case 3:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+		break;
+	}
+
+	if (adapter->intr_scheme != -1 &&
+	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
+		writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+
+	/* Window = 0 or 1 */
+	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+		do {
+			writel(0xffffffff,
+			       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS));
+			mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
+			if (!(mask & 0x80))
+				break;
+			udelay(10);
+		} while (--retries);
+
+		if (!retries) {
+			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+					netxen_nic_driver_name);
+		}
+	}
+
+	DPRINTK(1, INFO, "Done with Disable Int\n");
+}
+
+static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+{
+	u32 mask;
+
+	DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+	if (adapter->intr_scheme != -1 &&
+		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+		switch (adapter->ahw.board_type) {
+		case NETXEN_NIC_GBE:
+			mask  =  0x77b;
+			break;
+		case NETXEN_NIC_XGBE:
+			mask  =  0x77f;
+			break;
+		default:
+			mask  =  0x7ff;
+			break;
+		}
+
+		writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+	}
+
+	switch (adapter->portnum) {
+	case 0:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+		break;
+	case 1:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+		break;
+	case 2:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+		break;
+	case 3:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+		break;
+	}
+
+	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+		mask = 0xbff;
+		if (adapter->intr_scheme != -1 &&
+			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+			writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+		}
+		writel(mask,
+		       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
+	}
+
+	DPRINTK(1, INFO, "Done with enable Int\n");
+}
+
 /*
  * netxen_nic_probe()
  *