PCI: change PCI nomenclature in drivers/pci/ (comment changes)

Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
terms listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf

Patch is limited to drivers/pci/ and changes concern comments only.
Signed-off-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/hotplug/shpchp.h

@@ -121,7 +121,7 @@ struct controller {
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450
 #define PCI_DEVICE_ID_AMD_POGO_7458	0x7458
 
-/* AMD PCIX bridge registers */
+/* AMD PCI-X bridge registers */
 #define PCIX_MEM_BASE_LIMIT_OFFSET	0x1C
 #define PCIX_MISCII_OFFSET		0x48
 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET	0x80

drivers/pci/intel-iommu.c

@@ -304,7 +304,7 @@ struct device_domain_info {
 	int segment;		/* PCI domain */
 	u8 bus;			/* PCI bus number */
 	u8 devfn;		/* PCI devfn number */
-	struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+	struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */
 	struct intel_iommu *iommu; /* IOMMU used by this device */
 	struct dmar_domain *domain; /* pointer to domain */
 };
@@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev,
 			return ret;
 		parent = parent->bus->self;
 	}
-	if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+	if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
 		return domain_context_mapping_one(domain,
 					pci_domain_nr(tmp->subordinate),
 					tmp->subordinate->number, 0,
@@ -3319,7 +3319,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu,
 					 parent->devfn);
 			parent = parent->bus->self;
 		}
-		if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+		if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
 			iommu_detach_dev(iommu,
 				tmp->subordinate->number, 0);
 		else /* this is a legacy PCI bridge */

drivers/pci/intr_remapping.c

@@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev)
 
 	bridge = pci_find_upstream_pcie_bridge(dev);
 	if (bridge) {
-		if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */
+		if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */
 			set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
 				(bridge->bus->number << 8) | dev->bus->number);
 		else /* this is a legacy PCI bridge */

drivers/pci/pci.c

@@ -1153,11 +1153,11 @@ pci_disable_device(struct pci_dev *dev)
 
 /**
  * pcibios_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
  * @state: Reset state to enter into
  *
  *
- * Sets the PCI-E reset state for the device. This is the default
+ * Sets the PCIe reset state for the device. This is the default
  * implementation. Architecture implementations can override this.
  */
 int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
@@ -1168,7 +1168,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
 
 /**
  * pci_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
  * @state: Reset state to enter into
  *
  *

drivers/pci/pcie/aer/aer_inject.c

 /*
- * PCIE AER software error injection support.
+ * PCIe AER software error injection support.
  *
- * Debuging PCIE AER code is quite difficult because it is hard to
+ * Debuging PCIe AER code is quite difficult because it is hard to
  * trigger various real hardware errors. Software based error
  * injection can fake almost all kinds of errors with the help of a
  * user space helper tool aer-inject, which can be gotten from:

drivers/pci/pcie/aer/aerdrv.c

@@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev)
 	mutex_init(&rpc->rpc_mutex);
 	init_waitqueue_head(&rpc->wait_release);
 
-	/* Use PCIE bus function to store rpc into PCIE device */
+	/* Use PCIe bus function to store rpc into PCIe device */
 	set_service_data(dev, rpc);
 
 	return rpc;

drivers/pci/pcie/aer/aerdrv_acpi.c

@@ -24,7 +24,7 @@
  *
  * @return: Zero on success. Nonzero otherwise.
  *
- * Invoked when PCIE bus loads AER service driver. To avoid conflict with
+ * Invoked when PCIe bus loads AER service driver. To avoid conflict with
  * BIOS AER support requires BIOS to yield AER control to OS native driver.
  **/
 int aer_osc_setup(struct pcie_device *pciedev)

drivers/pci/pcie/aer/aerdrv_core.c

@@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev,
  * aer_enable_rootport - enable Root Port's interrupts when receiving messages
  * @rpc: pointer to a Root Port data structure
  *
- * Invoked when PCIE bus loads AER service driver.
+ * Invoked when PCIe bus loads AER service driver.
  */
 void aer_enable_rootport(struct aer_rpc *rpc)
 {
@@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
 	u32 reg32;
 
 	pos = pci_pcie_cap(pdev);
-	/* Clear PCIE Capability's Device Status */
+	/* Clear PCIe Capability's Device Status */
 	pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, &reg16);
 	pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
 
@@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
  * disable_root_aer - disable Root Port's interrupts when receiving messages
  * @rpc: pointer to a Root Port data structure
  *
- * Invoked when PCIE bus unloads AER service driver.
+ * Invoked when PCIe bus unloads AER service driver.
  */
 static void disable_root_aer(struct aer_rpc *rpc)
 {

drivers/pci/pcie/aspm.c

 /*
  * File:	drivers/pci/pcie/aspm.c
- * Enabling PCIE link L0s/L1 state and Clock Power Management
+ * Enabling PCIe link L0s/L1 state and Clock Power Management
  *
  * Copyright (C) 2007 Intel
  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
@@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 	int pos;
 	u32 reg32;
 	/*
-	 * Some functions in a slot might not all be PCIE functions,
+	 * Some functions in a slot might not all be PCIe functions,
 	 * very strange. Disable ASPM for the whole slot
 	 */
 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {

drivers/pci/search.c

@@ -15,9 +15,9 @@
 
 DECLARE_RWSEM(pci_bus_sem);
 /*
- * find the upstream PCIE-to-PCI bridge of a PCI device
+ * find the upstream PCIe-to-PCI bridge of a PCI device
  * if the device is PCIE, return NULL
- * if the device isn't connected to a PCIE bridge (that is its parent is a
+ * if the device isn't connected to a PCIe bridge (that is its parent is a
  * legacy PCI bridge and the bridge is directly connected to bus 0), return its
  * parent
  */
@@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev)
 			tmp = pdev;
 			continue;
 		}
-		/* PCI device should connect to a PCIE bridge */
+		/* PCI device should connect to a PCIe bridge */
 		if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) {
 			/* Busted hardware? */
 			WARN_ON_ONCE(1);