提交 4554c135 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  i.MX SDMA: Fix burstsize settings
  ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only
  dma: sh_dma: not all SH DMAC implementations support MEMCPY
  at_hdmac: bugfix for enabling channel irq
  dmaengine: fix missing 'cnt' in ?: in dmatest
......@@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
.slave_only = 1,
};
static struct resource sh7372_usb_dmae0_resources[] = {
......@@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
.slave_only = 1,
};
static struct resource sh7372_usb_dmae1_resources[] = {
......
......@@ -1343,7 +1343,7 @@ static int __init at_dma_probe(struct platform_device *pdev)
tasklet_init(&atchan->tasklet, atc_tasklet,
(unsigned long)atchan);
atc_enable_irq(atchan);
atc_enable_chan_irq(atdma, i);
}
/* set base routines */
......@@ -1410,7 +1410,7 @@ static int __exit at_dma_remove(struct platform_device *pdev)
struct at_dma_chan *atchan = to_at_dma_chan(chan);
/* Disable interrupts */
atc_disable_irq(atchan);
atc_disable_chan_irq(atdma, chan->chan_id);
tasklet_disable(&atchan->tasklet);
tasklet_kill(&atchan->tasklet);
......
......@@ -327,28 +327,27 @@ static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
}
static void atc_setup_irq(struct at_dma_chan *atchan, int on)
static void atc_setup_irq(struct at_dma *atdma, int chan_id, int on)
{
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
u32 ebci;
u32 ebci;
/* enable interrupts on buffer transfer completion & error */
ebci = AT_DMA_BTC(atchan->chan_common.chan_id)
| AT_DMA_ERR(atchan->chan_common.chan_id);
ebci = AT_DMA_BTC(chan_id)
| AT_DMA_ERR(chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
else
dma_writel(atdma, EBCIDR, ebci);
}
static inline void atc_enable_irq(struct at_dma_chan *atchan)
static void atc_enable_chan_irq(struct at_dma *atdma, int chan_id)
{
atc_setup_irq(atchan, 1);
atc_setup_irq(atdma, chan_id, 1);
}
static inline void atc_disable_irq(struct at_dma_chan *atchan)
static void atc_disable_chan_irq(struct at_dma *atdma, int chan_id)
{
atc_setup_irq(atchan, 0);
atc_setup_irq(atdma, chan_id, 0);
}
......
......@@ -599,7 +599,7 @@ static int dmatest_add_channel(struct dma_chan *chan)
}
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_PQ);
thread_count += cnt > 0 ?: 0;
thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
......
......@@ -1102,11 +1102,13 @@ static int sdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
case DMA_SLAVE_CONFIG:
if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) {
sdmac->per_address = dmaengine_cfg->src_addr;
sdmac->watermark_level = dmaengine_cfg->src_maxburst;
sdmac->watermark_level = dmaengine_cfg->src_maxburst *
dmaengine_cfg->src_addr_width;
sdmac->word_size = dmaengine_cfg->src_addr_width;
} else {
sdmac->per_address = dmaengine_cfg->dst_addr;
sdmac->watermark_level = dmaengine_cfg->dst_maxburst;
sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
dmaengine_cfg->dst_addr_width;
sdmac->word_size = dmaengine_cfg->dst_addr_width;
}
sdmac->direction = dmaengine_cfg->direction;
......
......@@ -1262,7 +1262,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&shdev->common.channels);
dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
if (!pdata->slave_only)
dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
if (pdata->slave && pdata->slave_num)
dma_cap_set(DMA_SLAVE, shdev->common.cap_mask);
......
......@@ -70,6 +70,7 @@ struct sh_dmae_pdata {
unsigned int needs_tend_set:1;
unsigned int no_dmars:1;
unsigned int chclr_present:1;
unsigned int slave_only:1;
};
/* DMA register */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册