[VIDEO]: Add Sun XVR-500 framebuffer driver.

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/video/Kconfig

@@ -1383,6 +1383,19 @@ config FB_LEO
 	  This is the frame buffer device driver for the SBUS-based Sun ZX
 	  (leo) frame buffer cards.
 
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
 config FB_PCI
 	bool "PCI framebuffers"
 	depends on (FB = y) && PCI && SPARC

drivers/video/Makefile

@@ -67,6 +67,7 @@ obj-$(CONFIG_FB_ATARI)            += atafb.o c2p.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
 obj-$(CONFIG_FB_MAC)              += macfb.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o
+obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o

drivers/video/sunxvr500.c

+/* sunxvr500.c: Sun 3DLABS XVR-500 Expert3D driver for sparc64 systems
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+/* XXX This device has a 'dev-comm' property which aparently is
+ * XXX a pointer into the openfirmware's address space which is
+ * XXX a shared area the kernel driver can use to keep OBP
+ * XXX informed about the current resolution setting.  The idea
+ * XXX is that the kernel can change resolutions, and as long
+ * XXX as the values in the 'dev-comm' area are accurate then
+ * XXX OBP can still render text properly to the console.
+ * XXX
+ * XXX I'm still working out the layout of this and whether there
+ * XXX are any signatures we need to look for etc.
+ */
+struct e3d_info {
+	struct fb_info		*info;
+	struct pci_dev		*pdev;
+
+	spinlock_t		lock;
+
+	char __iomem		*fb_base;
+	unsigned long		fb_base_phys;
+
+	unsigned long		fb8_buf_diff;
+	unsigned long		regs_base_phys;
+
+	void __iomem		*ramdac;
+
+	struct device_node	*of_node;
+
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		depth;
+	unsigned int		fb_size;
+
+	u32			fb_base_reg;
+	u32			fb8_0_off;
+	u32			fb8_1_off;
+
+	u32			pseudo_palette[256];
+};
+
+static int __devinit e3d_get_props(struct e3d_info *ep)
+{
+	ep->width = of_getintprop_default(ep->of_node, "width", 0);
+	ep->height = of_getintprop_default(ep->of_node, "height", 0);
+	ep->depth = of_getintprop_default(ep->of_node, "depth", 8);
+
+	if (!ep->width || !ep->height) {
+		printk(KERN_ERR "e3d: Critical properties missing for %s\n",
+		       pci_name(ep->pdev));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* My XVR-500 comes up, at 1280x768 and a FB base register value of
+ * 0x04000000, the following video layout register values:
+ *
+ * RAMDAC_VID_WH	0x03ff04ff
+ * RAMDAC_VID_CFG	0x1a0b0088
+ * RAMDAC_VID_32FB_0	0x04000000
+ * RAMDAC_VID_32FB_1	0x04800000
+ * RAMDAC_VID_8FB_0	0x05000000
+ * RAMDAC_VID_8FB_1	0x05200000
+ * RAMDAC_VID_XXXFB	0x05400000
+ * RAMDAC_VID_YYYFB	0x05c00000
+ * RAMDAC_VID_ZZZFB	0x05e00000
+ */
+/* Video layout registers */
+#define RAMDAC_VID_WH		0x00000070UL /* (height-1)<<16 | (width-1) */
+#define RAMDAC_VID_CFG		0x00000074UL /* 0x1a000088|(linesz_log2<<16) */
+#define RAMDAC_VID_32FB_0	0x00000078UL /* PCI base 32bpp FB buffer 0 */
+#define RAMDAC_VID_32FB_1	0x0000007cUL /* PCI base 32bpp FB buffer 1 */
+#define RAMDAC_VID_8FB_0	0x00000080UL /* PCI base 8bpp FB buffer 0 */
+#define RAMDAC_VID_8FB_1	0x00000084UL /* PCI base 8bpp FB buffer 1 */
+#define RAMDAC_VID_XXXFB	0x00000088UL /* PCI base of XXX FB */
+#define RAMDAC_VID_YYYFB	0x0000008cUL /* PCI base of YYY FB */
+#define RAMDAC_VID_ZZZFB	0x00000090UL /* PCI base of ZZZ FB */
+
+/* CLUT registers */
+#define RAMDAC_INDEX		0x000000bcUL
+#define RAMDAC_DATA		0x000000c0UL
+
+static void e3d_clut_write(struct e3d_info *ep, int index, u32 val)
+{
+	void __iomem *ramdac = ep->ramdac;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	writel(index, ramdac + RAMDAC_INDEX);
+	writel(val, ramdac + RAMDAC_DATA);
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static int e3d_setcolreg(unsigned regno,
+			 unsigned red, unsigned green, unsigned blue,
+			 unsigned transp, struct fb_info *info)
+{
+	struct e3d_info *ep = info->par;
+	u32 red_8, green_8, blue_8;
+	u32 red_10, green_10, blue_10;
+	u32 value;
+
+	if (regno >= 256)
+		return 1;
+
+	red_8 = red >> 8;
+	green_8 = green >> 8;
+	blue_8 = blue >> 8;
+
+	value = (blue_8 << 24) | (green_8 << 16) | (red_8 << 8);
+	((u32 *)info->pseudo_palette)[regno] = value;
+
+
+	red_10 = red >> 6;
+	green_10 = green >> 6;
+	blue_10 = blue >> 6;
+
+	value = (blue_10 << 20) | (green_10 << 10) | (red_10 << 0);
+	e3d_clut_write(ep, regno, value);
+
+	return 0;
+}
+
+/* XXX This is a bit of a hack.  I can't figure out exactly how the
+ * XXX two 8bpp areas of the framebuffer work.  I imagine there is
+ * XXX a WID attribute somewhere else in the framebuffer which tells
+ * XXX the ramdac which of the two 8bpp framebuffer regions to take
+ * XXX the pixel from.  So, for now, render into both regions to make
+ * XXX sure the pixel shows up.
+ */
+static void e3d_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct e3d_info *ep = info->par;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	cfb_imageblit(info, image);
+	info->screen_base += ep->fb8_buf_diff;
+	cfb_imageblit(info, image);
+	info->screen_base -= ep->fb8_buf_diff;
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void e3d_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct e3d_info *ep = info->par;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	cfb_fillrect(info, rect);
+	info->screen_base += ep->fb8_buf_diff;
+	cfb_fillrect(info, rect);
+	info->screen_base -= ep->fb8_buf_diff;
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void e3d_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct e3d_info *ep = info->par;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	cfb_copyarea(info, area);
+	info->screen_base += ep->fb8_buf_diff;
+	cfb_copyarea(info, area);
+	info->screen_base -= ep->fb8_buf_diff;
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static struct fb_ops e3d_ops = {
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= e3d_setcolreg,
+	.fb_fillrect		= e3d_fillrect,
+	.fb_copyarea		= e3d_copyarea,
+	.fb_imageblit		= e3d_imageblit,
+};
+
+static int __devinit e3d_set_fbinfo(struct e3d_info *ep)
+{
+	struct fb_info *info = ep->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &e3d_ops;
+	info->screen_base = ep->fb_base;
+	info->screen_size = ep->fb_size;
+
+	info->pseudo_palette = ep->pseudo_palette;
+
+	/* Fill fix common fields */
+	strlcpy(info->fix.id, "e3d", sizeof(info->fix.id));
+        info->fix.smem_start = ep->fb_base_phys;
+        info->fix.smem_len = ep->fb_size;
+        info->fix.type = FB_TYPE_PACKED_PIXELS;
+	if (ep->depth == 32 || ep->depth == 24)
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	else
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+	var->xres = ep->width;
+	var->yres = ep->height;
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->bits_per_pixel = ep->depth;
+
+	var->red.offset = 8;
+	var->red.length = 8;
+	var->green.offset = 16;
+	var->green.length = 8;
+	var->blue.offset = 24;
+	var->blue.length = 8;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		printk(KERN_ERR "e3d: Cannot allocate color map.\n");
+		return -ENOMEM;
+	}
+
+        return 0;
+}
+
+static int __devinit e3d_pci_register(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	struct fb_info *info;
+	struct e3d_info *ep;
+	unsigned int line_length;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err < 0) {
+		printk(KERN_ERR "e3d: Cannot enable PCI device %s\n",
+		       pci_name(pdev));
+		goto err_out;
+	}
+
+	info = framebuffer_alloc(sizeof(struct e3d_info), &pdev->dev);
+	if (!info) {
+		printk(KERN_ERR "e3d: Cannot allocate fb_info\n");
+		err = -ENOMEM;
+		goto err_disable;
+	}
+
+	ep = info->par;
+	ep->info = info;
+	ep->pdev = pdev;
+	spin_lock_init(&ep->lock);
+	ep->of_node = pci_device_to_OF_node(pdev);
+	if (!ep->of_node) {
+		printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
+		       pci_name(pdev));
+		err = -ENODEV;
+		goto err_release_fb;
+	}
+
+	/* Read the PCI base register of the frame buffer, which we
+	 * need in order to interpret the RAMDAC_VID_*FB* values in
+	 * the ramdac correctly.
+	 */
+	pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0,
+			      &ep->fb_base_reg);
+	ep->fb_base_reg &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	ep->regs_base_phys = pci_resource_start (pdev, 1);
+	err = pci_request_region(pdev, 1, "e3d regs");
+	if (err < 0) {
+		printk("e3d: Cannot request region 1 for %s\n",
+		       pci_name(pdev));
+		goto err_release_fb;
+	}
+	ep->ramdac = ioremap(ep->regs_base_phys + 0x8000, 0x1000);
+	if (!ep->ramdac)
+		goto err_release_pci1;
+
+	ep->fb8_0_off = readl(ep->ramdac + RAMDAC_VID_8FB_0);
+	ep->fb8_0_off -= ep->fb_base_reg;
+
+	ep->fb8_1_off = readl(ep->ramdac + RAMDAC_VID_8FB_1);
+	ep->fb8_1_off -= ep->fb_base_reg;
+
+	ep->fb8_buf_diff = ep->fb8_1_off - ep->fb8_0_off;
+
+	ep->fb_base_phys = pci_resource_start (pdev, 0);
+	ep->fb_base_phys += ep->fb8_0_off;
+
+	err = pci_request_region(pdev, 0, "e3d framebuffer");
+	if (err < 0) {
+		printk("e3d: Cannot request region 0 for %s\n",
+		       pci_name(pdev));
+		goto err_unmap_ramdac;
+	}
+
+	err = e3d_get_props(ep);
+	if (err)
+		goto err_release_pci0;
+
+	line_length = (readl(ep->ramdac + RAMDAC_VID_CFG) >> 16) & 0xff;
+	line_length = 1 << line_length;
+
+	switch (ep->depth) {
+	case 8:
+		info->fix.line_length = line_length;
+		break;
+	case 16:
+		info->fix.line_length = line_length * 2;
+		break;
+	case 24:
+		info->fix.line_length = line_length * 3;
+		break;
+	case 32:
+		info->fix.line_length = line_length * 4;
+		break;
+	}
+	ep->fb_size = info->fix.line_length * ep->height;
+
+	ep->fb_base = ioremap(ep->fb_base_phys, ep->fb_size);
+	if (!ep->fb_base)
+		goto err_release_pci0;
+
+	err = e3d_set_fbinfo(ep);
+	if (err)
+		goto err_unmap_fb;
+
+	pci_set_drvdata(pdev, info);
+
+	printk("e3d: Found device at %s\n", pci_name(pdev));
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		printk(KERN_ERR "e3d: Could not register framebuffer %s\n",
+		       pci_name(pdev));
+		goto err_unmap_fb;
+	}
+
+	return 0;
+
+err_unmap_fb:
+	iounmap(ep->fb_base);
+
+err_release_pci0:
+	pci_release_region(pdev, 0);
+
+err_unmap_ramdac:
+	iounmap(ep->ramdac);
+
+err_release_pci1:
+	pci_release_region(pdev, 1);
+
+err_release_fb:
+        framebuffer_release(info);
+
+err_disable:
+	pci_disable_device(pdev);
+
+err_out:
+	return err;
+}
+
+static void __devexit e3d_pci_unregister(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct e3d_info *ep = info->par;
+
+	unregister_framebuffer(info);
+
+	iounmap(ep->ramdac);
+	iounmap(ep->fb_base);
+
+	pci_release_region(pdev, 0);
+	pci_release_region(pdev, 1);
+
+        framebuffer_release(info);
+
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id e3d_pci_table[] = {
+	{	PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0),	},
+	{	PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2),	},
+	{	.vendor = PCI_VENDOR_ID_3DLABS,
+		.device = PCI_ANY_ID,
+		.subvendor = PCI_VENDOR_ID_3DLABS,
+		.subdevice = 0x0108,
+	},
+	{	.vendor = PCI_VENDOR_ID_3DLABS,
+		.device = PCI_ANY_ID,
+		.subvendor = PCI_VENDOR_ID_3DLABS,
+		.subdevice = 0x0140,
+	},
+	{	.vendor = PCI_VENDOR_ID_3DLABS,
+		.device = PCI_ANY_ID,
+		.subvendor = PCI_VENDOR_ID_3DLABS,
+		.subdevice = 0x1024,
+	},
+	{ 0, }
+};
+
+static struct pci_driver e3d_driver = {
+	.name		= "e3d",
+	.id_table	= e3d_pci_table,
+	.probe		= e3d_pci_register,
+	.remove		= __devexit_p(e3d_pci_unregister),
+};
+
+static int __init e3d_init(void)
+{
+	if (fb_get_options("e3d", NULL))
+		return -ENODEV;
+
+	return pci_register_driver(&e3d_driver);
+}
+
+static void __exit e3d_exit(void)
+{
+	pci_unregister_driver(&e3d_driver);
+}
+
+module_init(e3d_init);
+module_exit(e3d_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-500 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");