提交 4509f847 编写于 作者: U Ulf Hansson 提交者: Chris Ball

mmc: core: Add ignore_crc flag to __mmc_switch

Instead of handle specific adaptations, releated to certain switch
operations, inside __mmc_switch, push this to be handled by the caller
instead.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NChris Ball <chris@printf.net>
上级 1d4d7744
......@@ -285,7 +285,8 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
}
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
EXT_CSD_BKOPS_START, 1, timeout,
use_busy_signal, true, false);
if (err) {
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
......
......@@ -856,8 +856,8 @@ static int mmc_select_hs200(struct mmc_card *card)
/* switch to HS200 mode if bus width set successfully */
if (!err)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 2, 0);
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 2, 0, true, true, true);
err:
return err;
}
......@@ -1074,9 +1074,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
host->caps2 & MMC_CAP2_HS200)
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1,
card->ext_csd.generic_cmd6_time);
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1,
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err && err != -EBADMSG)
goto free_card;
......@@ -1400,7 +1401,7 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
notify_type, timeout, true, false);
notify_type, timeout, true, false, false);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
......
......@@ -405,17 +405,18 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
* timeout of zero implies maximum possible timeout
* @use_busy_signal: use the busy signal as response type
* @send_status: send status cmd to poll for busy
* @ignore_crc: ignore CRC errors when sending status cmd to poll for busy
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, bool use_busy_signal, bool send_status)
unsigned int timeout_ms, bool use_busy_signal, bool send_status,
bool ignore_crc)
{
int err;
struct mmc_command cmd = {0};
unsigned long timeout;
u32 status = 0;
bool ignore_crc = false;
BUG_ON(!card);
BUG_ON(!card->host);
......@@ -445,14 +446,13 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
return 0;
/*
* Must check status to be sure of no errors
* If CMD13 is to check the busy completion of the timing change,
* disable the check of CRC error.
* CRC errors shall only be ignored in cases were CMD13 is used to poll
* to detect busy completion.
*/
if (index == EXT_CSD_HS_TIMING &&
!(card->host->caps & MMC_CAP_WAIT_WHILE_BUSY))
ignore_crc = true;
if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
ignore_crc = false;
/* Must check status to be sure of no errors. */
timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
do {
if (send_status) {
......@@ -501,7 +501,8 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
return __mmc_switch(card, set, index, value, timeout_ms, true, true);
return __mmc_switch(card, set, index, value, timeout_ms, true, true,
false);
}
EXPORT_SYMBOL_GPL(mmc_switch);
......
......@@ -152,7 +152,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
bool);
bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册