提交 44e4e196 编写于 作者: M Michal Simek

microblaze: Fix cache_line_lenght

We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
上级 6cec713b
......@@ -43,7 +43,7 @@ struct cpuinfo {
u32 use_icache;
u32 icache_tagbits;
u32 icache_write;
u32 icache_line;
u32 icache_line_length;
u32 icache_size;
unsigned long icache_base;
unsigned long icache_high;
......@@ -51,7 +51,7 @@ struct cpuinfo {
u32 use_dcache;
u32 dcache_tagbits;
u32 dcache_write;
u32 dcache_line;
u32 dcache_line_length;
u32 dcache_size;
unsigned long dcache_base;
unsigned long dcache_high;
......
......@@ -140,7 +140,7 @@ void __invalidate_icache_all(void)
/* Just loop through cache size and invalidate, no need to add
CACHE_BASE address */
for (i = 0; i < cpuinfo.icache_size;
i += cpuinfo.icache_line)
i += cpuinfo.icache_line_length)
__invalidate_icache(i);
__enable_icache();
......@@ -160,15 +160,15 @@ void __invalidate_icache_range(unsigned long start, unsigned long end)
* just cover cache footprint
*/
end = min(start + cpuinfo.icache_size, end);
align = ~(cpuinfo.icache_line - 1);
align = ~(cpuinfo.icache_line_length - 1);
start &= align; /* Make sure we are aligned */
/* Push end up to the next cache line */
end = ((end & align) + cpuinfo.icache_line);
end = ((end & align) + cpuinfo.icache_line_length);
local_irq_save(flags);
__disable_icache();
for (i = start; i < end; i += cpuinfo.icache_line)
for (i = start; i < end; i += cpuinfo.icache_line_length)
__invalidate_icache(i);
__enable_icache();
......@@ -207,7 +207,7 @@ void __invalidate_dcache_all(void)
* no need to add CACHE_BASE address
*/
for (i = 0; i < cpuinfo.dcache_size;
i += cpuinfo.dcache_line)
i += cpuinfo.dcache_line_length)
__invalidate_dcache(i);
__enable_dcache();
......@@ -227,14 +227,14 @@ void __invalidate_dcache_range(unsigned long start, unsigned long end)
* just cover cache footprint
*/
end = min(start + cpuinfo.dcache_size, end);
align = ~(cpuinfo.dcache_line - 1);
align = ~(cpuinfo.dcache_line_length - 1);
start &= align; /* Make sure we are aligned */
/* Push end up to the next cache line */
end = ((end & align) + cpuinfo.dcache_line);
end = ((end & align) + cpuinfo.dcache_line_length);
local_irq_save(flags);
__disable_dcache();
for (i = start; i < end; i += cpuinfo.dcache_line)
for (i = start; i < end; i += cpuinfo.dcache_line_length)
__invalidate_dcache(i);
__enable_dcache();
......
......@@ -70,7 +70,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
CI(use_icache, USE_ICACHE);
CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
CI(icache_write, ICACHE_ALLOW_WR);
CI(icache_line, ICACHE_LINE_LEN);
ci->icache_line_length = PVR_ICACHE_LINE_LEN(pvr) << 2;
CI(icache_size, ICACHE_BYTE_SIZE);
CI(icache_base, ICACHE_BASEADDR);
CI(icache_high, ICACHE_HIGHADDR);
......@@ -78,7 +78,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
CI(use_dcache, USE_DCACHE);
CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
CI(dcache_write, DCACHE_ALLOW_WR);
CI(dcache_line, DCACHE_LINE_LEN);
ci->dcache_line_length = PVR_DCACHE_LINE_LEN(pvr) << 2;
CI(dcache_size, DCACHE_BYTE_SIZE);
CI(dcache_base, DCACHE_BASEADDR);
CI(dcache_high, DCACHE_HIGHADDR);
......
......@@ -72,12 +72,12 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
ci->use_icache = fcpu(cpu, "xlnx,use-icache");
ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2;
if (!ci->icache_line) {
ci->icache_line_length = fcpu(cpu, "xlnx,icache-line-len") << 2;
if (!ci->icache_line_length) {
if (fcpu(cpu, "xlnx,icache-use-fsl"))
ci->icache_line = 4 << 2;
ci->icache_line_length = 4 << 2;
else
ci->icache_line = 1 << 2;
ci->icache_line_length = 1 << 2;
}
ci->icache_size = fcpu(cpu, "i-cache-size");
ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
......@@ -86,12 +86,12 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2;
if (!ci->dcache_line) {
ci->dcache_line_length = fcpu(cpu, "xlnx,dcache-line-len") << 2;
if (!ci->dcache_line_length) {
if (fcpu(cpu, "xlnx,dcache-use-fsl"))
ci->dcache_line = 4 << 2;
ci->dcache_line_length = 4 << 2;
else
ci->dcache_line = 1 << 2;
ci->dcache_line_length = 1 << 2;
}
ci->dcache_size = fcpu(cpu, "d-cache-size");
ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册