x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED

Bodo reported that on the Asrock M3A UCC, v3.12.6 hangs during boot unless
he uses "pci=nocrs".  This regression was caused by 7bc5e3f2 ("x86/PCI:
use host bridge _CRS info by default on 2008 and newer machines"), which
appeared in v2.6.34.

The reason is that the HPET address appears in a PCI device BAR, and this
address is not contained in any of the host bridge windows.  Linux moves
the PCI BAR into a window, but the original address was published via the
HPET table and an ACPI device, so changing the BAR is a bad idea.  Here's
the dmesg info:

  ACPI: HPET id: 0x43538301 base: 0xfed00000
  pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
  pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
  pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
  pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
  hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
  pnp 00:06: [mem 0xfed00000-0xfed003ff]

When we notice the BAR is not in a host bridge window, we try to move it,
but that causes a hang shortly thereafter:

  pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
  pci 0000:00:14.0: BAR 1: assigned [mem 0xf0000000-0xf00003ff]

This patch marks the BAR as IORESOURCE_PCI_FIXED to prevent Linux from
moving it.  This depends on a previous patch ("x86/PCI: Don't try to move
IORESOURCE_PCI_FIXED resources") to check for this flag when
pci_claim_resource() fails.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=68591Reported-and-tested-by: NBodo Eggert <7eggert@gmx.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

arch/x86/pci/fixup.c

@@ -6,6 +6,7 @@
 #include <linux/dmi.h>
 #include <linux/pci.h>
 #include <linux/vgaarb.h>
+#include <asm/hpet.h>
 #include <asm/pci_x86.h>
 
 static void pci_fixup_i450nx(struct pci_dev *d)
@@ -526,6 +527,19 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
 
+#ifdef CONFIG_HPET_TIMER
+static void sb600_hpet_quirk(struct pci_dev *dev)
+{
+	struct resource *r = &dev->resource[1];
+
+	if (r->flags & IORESOURCE_MEM && r->start == hpet_address) {
+		r->flags |= IORESOURCE_PCI_FIXED;
+		dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk);
+#endif
+
 /*
  * Twinhead H12Y needs us to block out a region otherwise we map devices
  * there and any access kills the box.