提交 447a0470 编写于 作者: C Chen-Yu Tsai 提交者: Maxime Ripard

ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default

The clock-frequency values of the i2c controller nodes match the
defaults of the driver. Remove the properties to use the defaults,
and be consistent with sun8i.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
上级 dc66085b
......@@ -765,7 +765,6 @@
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -776,7 +775,6 @@
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -787,7 +785,6 @@
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -578,7 +578,6 @@
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
};
......@@ -589,7 +588,6 @@
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
};
......@@ -600,7 +598,6 @@
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
};
......
......@@ -504,7 +504,6 @@
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -515,7 +514,6 @@
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -526,7 +524,6 @@
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -657,7 +657,6 @@
reg = <0x01c2ac00 0x400>;
interrupts = <0 6 4>;
clocks = <&apb2_gates 0>;
clock-frequency = <100000>;
resets = <&apb2_rst 0>;
status = "disabled";
};
......@@ -667,7 +666,6 @@
reg = <0x01c2b000 0x400>;
interrupts = <0 7 4>;
clocks = <&apb2_gates 1>;
clock-frequency = <100000>;
resets = <&apb2_rst 1>;
status = "disabled";
};
......@@ -677,7 +675,6 @@
reg = <0x01c2b400 0x400>;
interrupts = <0 8 4>;
clocks = <&apb2_gates 2>;
clock-frequency = <100000>;
resets = <&apb2_rst 2>;
status = "disabled";
};
......@@ -687,7 +684,6 @@
reg = <0x01c2b800 0x400>;
interrupts = <0 9 4>;
clocks = <&apb2_gates 3>;
clock-frequency = <100000>;
resets = <&apb2_rst 3>;
status = "disabled";
};
......
......@@ -915,7 +915,6 @@
reg = <0x01c2ac00 0x400>;
interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -926,7 +925,6 @@
reg = <0x01c2b000 0x400>;
interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -937,7 +935,6 @@
reg = <0x01c2b400 0x400>;
interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -948,7 +945,6 @@
reg = <0x01c2b800 0x400>;
interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......@@ -959,7 +955,6 @@
reg = <0x01c2c000 0x400>;
interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册