提交 443a389f 编写于 作者: V Ville Syrjälä

drm/i915: Add dev_priv->psr_mmio_base

Drop the EDP_PSR_BASE() thing, and just stick the PSR register offset
under dev_priv, like we for DSI and GPIO for example.

TODO: could probably move a bunch of this kind of stuff into the device
info instead...

v2: Drop the spurious whitespace change (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447266856-30249-7-git-send-email-ville.syrjala@linux.intel.com
上级 330e20ec
......@@ -2561,7 +2561,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
yesno(work_busy(&dev_priv->psr.work.work)));
if (HAS_DDI(dev))
enabled = I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE;
enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
else {
for_each_pipe(dev_priv, pipe) {
stat[pipe] = I915_READ(VLV_PSRSTAT(pipe)) &
......@@ -2583,7 +2583,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
/* CHV PSR has no kind of performance counter */
if (HAS_DDI(dev)) {
psrperf = I915_READ(EDP_PSR_PERF_CNT(dev)) &
psrperf = I915_READ(EDP_PSR_PERF_CNT) &
EDP_PSR_PERF_CNT_MASK;
seq_printf(m, "Performance_Counter: %u\n", psrperf);
......
......@@ -1717,6 +1717,8 @@ struct drm_i915_private {
/* MMIO base address for MIPI regs */
uint32_t mipi_mmio_base;
uint32_t psr_mmio_base;
wait_queue_head_t gmbus_wait_queue;
struct pci_dev *bridge_dev;
......
......@@ -3075,8 +3075,9 @@ enum skl_disp_power_wells {
#define VLV_PSRSTAT(pipe) _PIPE(pipe, _PSRSTATA, _PSRSTATB)
/* HSW+ eDP PSR registers */
#define EDP_PSR_BASE(dev) (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
#define EDP_PSR_CTL(dev) (EDP_PSR_BASE(dev) + 0)
#define HSW_EDP_PSR_BASE 0x64800
#define BDW_EDP_PSR_BASE 0x6f800
#define EDP_PSR_CTL (dev_priv->psr_mmio_base + 0)
#define EDP_PSR_ENABLE (1<<31)
#define BDW_PSR_SINGLE_FRAME (1<<30)
#define EDP_PSR_LINK_STANDBY (1<<27)
......@@ -3099,10 +3100,10 @@ enum skl_disp_power_wells {
#define EDP_PSR_TP1_TIME_0us (3<<4)
#define EDP_PSR_IDLE_FRAME_SHIFT 0
#define EDP_PSR_AUX_CTL(dev) (EDP_PSR_BASE(dev) + 0x10)
#define EDP_PSR_AUX_DATA(dev, i) (EDP_PSR_BASE(dev) + 0x14 + (i) * 4) /* 5 registers */
#define EDP_PSR_AUX_CTL (dev_priv->psr_mmio_base + 0x10)
#define EDP_PSR_AUX_DATA(i) (dev_priv->psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */
#define EDP_PSR_STATUS_CTL(dev) (EDP_PSR_BASE(dev) + 0x40)
#define EDP_PSR_STATUS_CTL (dev_priv->psr_mmio_base + 0x40)
#define EDP_PSR_STATUS_STATE_MASK (7<<29)
#define EDP_PSR_STATUS_STATE_IDLE (0<<29)
#define EDP_PSR_STATUS_STATE_SRDONACK (1<<29)
......@@ -3126,10 +3127,10 @@ enum skl_disp_power_wells {
#define EDP_PSR_STATUS_SENDING_TP1 (1<<4)
#define EDP_PSR_STATUS_IDLE_MASK 0xf
#define EDP_PSR_PERF_CNT(dev) (EDP_PSR_BASE(dev) + 0x44)
#define EDP_PSR_PERF_CNT (dev_priv->psr_mmio_base + 0x44)
#define EDP_PSR_PERF_CNT_MASK 0xffffff
#define EDP_PSR_DEBUG_CTL(dev) (EDP_PSR_BASE(dev) + 0x60)
#define EDP_PSR_DEBUG_CTL (dev_priv->psr_mmio_base + 0x60)
#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
......
......@@ -183,9 +183,9 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
DP_AUX_FRAME_SYNC_ENABLE);
aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(dev, 0);
DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(0);
aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL(dev);
DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL;
/* Setup AUX registers */
for (i = 0; i < sizeof(aux_msg); i += 4)
......@@ -277,7 +277,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
idle_frames += 4;
}
I915_WRITE(EDP_PSR_CTL(dev), val |
I915_WRITE(EDP_PSR_CTL, val |
(IS_BROADWELL(dev) ? 0 : link_entry_time) |
max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
......@@ -341,7 +341,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
......@@ -405,7 +405,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
}
/* Avoid continuous PSR exit by masking memup and hpd */
I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD);
/* Enable PSR on the panel */
......@@ -467,17 +467,17 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->psr.active) {
I915_WRITE(EDP_PSR_CTL(dev),
I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE);
I915_WRITE(EDP_PSR_CTL,
I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
/* Wait till PSR is idle */
if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) &
if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10))
DRM_ERROR("Timed out waiting for PSR Idle State\n");
dev_priv->psr.active = false;
} else {
WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
}
......@@ -524,7 +524,7 @@ static void intel_psr_work(struct work_struct *work)
* and be ready for re-enable.
*/
if (HAS_DDI(dev_priv->dev)) {
if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) &
if (wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
......@@ -567,11 +567,11 @@ static void intel_psr_exit(struct drm_device *dev)
return;
if (HAS_DDI(dev)) {
val = I915_READ(EDP_PSR_CTL(dev));
val = I915_READ(EDP_PSR_CTL);
WARN_ON(!(val & EDP_PSR_ENABLE));
I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE);
I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
} else {
val = I915_READ(VLV_PSRCTL(pipe));
......@@ -752,6 +752,9 @@ void intel_psr_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册