scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT

Without apriori understanding of what the define is, the name gives
a very different impression of what it is (a max delay value
for an EQ).  Rename the define so it reflects what it is: the number
of EQ IDs that can be set in one instance of the MODIFY_EQ_DELAY
mbx command.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_attr.c

@@ -4457,7 +4457,8 @@ lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	phba->cfg_fcp_imax = (uint32_t)val;
-	for (i = 0; i < phba->io_channel_irqs; i++)
+
+	for (i = 0; i < phba->io_channel_irqs; i += LPFC_MAX_EQ_DELAY_EQID_CNT)
 		lpfc_modify_hba_eq_delay(phba, i);
 
 	return strlen(buf);

drivers/scsi/lpfc/lpfc_hw4.h

@@ -1001,7 +1001,7 @@ struct eq_delay_info {
 	uint32_t phase;
 	uint32_t delay_multi;
 };
-#define	LPFC_MAX_EQ_DELAY	8
+#define	LPFC_MAX_EQ_DELAY_EQID_CNT	8
 
 struct sgl_page_pairs {
 	uint32_t sgl_pg0_addr_lo;
@@ -1070,7 +1070,7 @@ struct lpfc_mbx_modify_eq_delay {
 	union {
 		struct {
 			uint32_t num_eq;
-			struct eq_delay_info eq[LPFC_MAX_EQ_DELAY];
+			struct eq_delay_info eq[LPFC_MAX_EQ_DELAY_EQID_CNT];
 		} request;
 		struct {
 			uint32_t word0;

drivers/scsi/lpfc/lpfc_init.c

@@ -8756,12 +8756,9 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 		}
 	}
 
-	/*
-	 * Configure EQ delay multipier for interrupt coalescing using
-	 * MODIFY_EQ_DELAY for all EQs created, LPFC_MAX_EQ_DELAY at a time.
-	 */
-	for (qidx = 0; qidx < io_channel; qidx += LPFC_MAX_EQ_DELAY)
+	for (qidx = 0; qidx < io_channel; qidx += LPFC_MAX_EQ_DELAY_EQID_CNT)
 		lpfc_modify_hba_eq_delay(phba, qidx);
+
 	return 0;
 
 out_destroy:

drivers/scsi/lpfc/lpfc_sli.c

+
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
@@ -13874,6 +13875,8 @@ lpfc_dual_chute_pci_bar_map(struct lpfc_hba *phba, uint16_t pci_barset)
  * @startq: The starting FCP EQ to modify
  *
  * This function sends an MODIFY_EQ_DELAY mailbox command to the HBA.
+ * The command allows up to LPFC_MAX_EQ_DELAY_EQID_CNT EQ ID's to be
+ * updated in one mailbox command.
  *
  * The @phba struct is used to send mailbox command to HBA. The @startq
  * is used to get the starting FCP EQ to change.
@@ -13926,7 +13929,7 @@ lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq)
 		eq_delay->u.request.eq[cnt].phase = 0;
 		eq_delay->u.request.eq[cnt].delay_multi = dmult;
 		cnt++;
-		if (cnt >= LPFC_MAX_EQ_DELAY)
+		if (cnt >= LPFC_MAX_EQ_DELAY_EQID_CNT)
 			break;
 	}
 	eq_delay->u.request.num_eq = cnt;