提交 42f3030f 编写于 作者: M Mark Brown 提交者: Takashi Iwai

[ALSA] soc - wm8750 - Clean up checkpatch warnings

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 d454aee9
......@@ -110,7 +110,7 @@ static int wm8750_write(struct snd_soc_codec *codec, unsigned int reg,
data[0] = (reg << 1) | ((value >> 8) & 0x0001);
data[1] = value & 0x00ff;
wm8750_write_reg_cache (codec, reg, value);
wm8750_write_reg_cache(codec, reg, value);
if (codec->hw_write(codec->control_data, data, 2) == 2)
return 0;
else
......@@ -257,7 +257,8 @@ static int wm8750_add_controls(struct snd_soc_codec *codec)
for (i = 0; i < ARRAY_SIZE(wm8750_snd_controls); i++) {
err = snd_ctl_add(codec->card,
snd_soc_cnew(&wm8750_snd_controls[i],codec, NULL));
snd_soc_cnew(&wm8750_snd_controls[i],
codec, NULL));
if (err < 0)
return err;
}
......@@ -478,15 +479,13 @@ static int wm8750_add_widgets(struct snd_soc_codec *codec)
{
int i;
for(i = 0; i < ARRAY_SIZE(wm8750_dapm_widgets); i++) {
for (i = 0; i < ARRAY_SIZE(wm8750_dapm_widgets); i++)
snd_soc_dapm_new_control(codec, &wm8750_dapm_widgets[i]);
}
/* set up audio path audio_mapnects */
for(i = 0; audio_map[i][0] != NULL; i++) {
for (i = 0; audio_map[i][0] != NULL; i++)
snd_soc_dapm_connect_input(codec, audio_map[i][0],
audio_map[i][1], audio_map[i][2]);
}
snd_soc_dapm_new_widgets(codec);
return 0;
......@@ -714,8 +713,8 @@ static int wm8750_dapm_event(struct snd_soc_codec *codec, int event)
}
#define WM8750_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
#define WM8750_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE)
......@@ -784,7 +783,8 @@ static int wm8750_resume(struct platform_device *pdev)
if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) {
wm8750_dapm_event(codec, SNDRV_CTL_POWER_D2);
codec->dapm_state = SNDRV_CTL_POWER_D0;
schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(1000));
schedule_delayed_work(&codec->delayed_work,
msecs_to_jiffies(1000));
}
return 0;
......@@ -864,7 +864,7 @@ static int wm8750_init(struct snd_soc_device *socdev)
around */
static struct snd_soc_device *wm8750_socdev;
#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* WM8731 2 wire address is determined by GPIO5
......@@ -979,8 +979,8 @@ static int wm8750_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&codec->dapm_paths);
wm8750_socdev = socdev;
INIT_DELAYED_WORK(&codec->delayed_work, wm8750_work);
#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
normal_i2c[0] = setup->i2c_address;
codec->hw_write = (hw_write_t)i2c_master_send;
......@@ -1025,7 +1025,7 @@ static int wm8750_remove(struct platform_device *pdev)
run_delayed_work(&codec->delayed_work);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8750_i2c_driver);
#endif
kfree(codec->private_data);
......@@ -1040,7 +1040,6 @@ struct snd_soc_codec_device soc_codec_dev_wm8750 = {
.suspend = wm8750_suspend,
.resume = wm8750_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
MODULE_DESCRIPTION("ASoC WM8750 driver");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册