提交 41ce639a 编写于 作者: F FUJITA Tomonori 提交者: James Bottomley

[SCSI] cciss: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NMike Miller <Mike.Miller@hp.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 fb119935
......@@ -555,7 +555,6 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
{
struct scsi_cmnd *cmd;
ctlr_info_t *ctlr;
u64bit addr64;
ErrorInfo_struct *ei;
ei = cp->err_info;
......@@ -569,20 +568,7 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
cmd = (struct scsi_cmnd *) cp->scsi_cmd;
ctlr = hba[cp->ctlr];
/* undo the DMA mappings */
if (cmd->use_sg) {
pci_unmap_sg(ctlr->pdev,
cmd->request_buffer, cmd->use_sg,
cmd->sc_data_direction);
}
else if (cmd->request_bufflen) {
addr64.val32.lower = cp->SG[0].Addr.lower;
addr64.val32.upper = cp->SG[0].Addr.upper;
pci_unmap_single(ctlr->pdev, (dma_addr_t) addr64.val,
cmd->request_bufflen,
cmd->sc_data_direction);
}
scsi_dma_unmap(cmd);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
......@@ -597,7 +583,7 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
SCSI_SENSE_BUFFERSIZE :
ei->SenseLen);
cmd->resid = ei->ResidualCnt;
scsi_set_resid(cmd, ei->ResidualCnt);
if(ei->CommandStatus != 0)
{ /* an error has occurred */
......@@ -1204,46 +1190,29 @@ cciss_scatter_gather(struct pci_dev *pdev,
CommandList_struct *cp,
struct scsi_cmnd *cmd)
{
unsigned int use_sg, nsegs=0, len;
struct scatterlist *scatter = (struct scatterlist *) cmd->request_buffer;
unsigned int len;
struct scatterlist *sg;
__u64 addr64;
/* is it just one virtual address? */
if (!cmd->use_sg) {
if (cmd->request_bufflen) { /* anything to xfer? */
addr64 = (__u64) pci_map_single(pdev,
cmd->request_buffer,
cmd->request_bufflen,
cmd->sc_data_direction);
cp->SG[0].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
cp->SG[0].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
cp->SG[0].Len = cmd->request_bufflen;
nsegs=1;
}
} /* else, must be a list of virtual addresses.... */
else if (cmd->use_sg <= MAXSGENTRIES) { /* not too many addrs? */
use_sg = pci_map_sg(pdev, cmd->request_buffer, cmd->use_sg,
cmd->sc_data_direction);
for (nsegs=0; nsegs < use_sg; nsegs++) {
addr64 = (__u64) sg_dma_address(&scatter[nsegs]);
len = sg_dma_len(&scatter[nsegs]);
cp->SG[nsegs].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
cp->SG[nsegs].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
cp->SG[nsegs].Len = len;
cp->SG[nsegs].Ext = 0; // we are not chaining
int use_sg, i;
BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES);
use_sg = scsi_dma_map(cmd);
if (use_sg) { /* not too many addrs? */
scsi_for_each_sg(cmd, sg, use_sg, i) {
addr64 = (__u64) sg_dma_address(sg);
len = sg_dma_len(sg);
cp->SG[i].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
cp->SG[i].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
cp->SG[i].Len = len;
cp->SG[i].Ext = 0; // we are not chaining
}
} else BUG();
}
cp->Header.SGList = (__u8) nsegs; /* no. SGs contig in this cmd */
cp->Header.SGTotal = (__u16) nsegs; /* total sgs in this cmd list */
cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */
cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */
return;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册