提交 4175242c 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Erratum #637 workaround
  amd64_edac: Factor in CC6 save area
  amd64_edac: Remove node interleave warning
  EDAC: Remove debugging output in scrub rate handling
...@@ -211,8 +211,6 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci) ...@@ -211,8 +211,6 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
scrubval = scrubval & 0x001F; scrubval = scrubval & 0x001F;
amd64_debug("pci-read, sdram scrub control value: %d\n", scrubval);
for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
if (scrubrates[i].scrubval == scrubval) { if (scrubrates[i].scrubval == scrubval) {
retval = scrubrates[i].bandwidth; retval = scrubrates[i].bandwidth;
...@@ -933,25 +931,74 @@ static int k8_early_channel_count(struct amd64_pvt *pvt) ...@@ -933,25 +931,74 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
/* On F10h and later ErrAddr is MC4_ADDR[47:1] */ /* On F10h and later ErrAddr is MC4_ADDR[47:1] */
static u64 get_error_address(struct mce *m) static u64 get_error_address(struct mce *m)
{ {
struct cpuinfo_x86 *c = &boot_cpu_data;
u64 addr;
u8 start_bit = 1; u8 start_bit = 1;
u8 end_bit = 47; u8 end_bit = 47;
if (boot_cpu_data.x86 == 0xf) { if (c->x86 == 0xf) {
start_bit = 3; start_bit = 3;
end_bit = 39; end_bit = 39;
} }
return m->addr & GENMASK(start_bit, end_bit); addr = m->addr & GENMASK(start_bit, end_bit);
/*
* Erratum 637 workaround
*/
if (c->x86 == 0x15) {
struct amd64_pvt *pvt;
u64 cc6_base, tmp_addr;
u32 tmp;
u8 mce_nid, intlv_en;
if ((addr & GENMASK(24, 47)) >> 24 != 0x00fdf7)
return addr;
mce_nid = amd_get_nb_id(m->extcpu);
pvt = mcis[mce_nid]->pvt_info;
amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_LIM, &tmp);
intlv_en = tmp >> 21 & 0x7;
/* add [47:27] + 3 trailing bits */
cc6_base = (tmp & GENMASK(0, 20)) << 3;
/* reverse and add DramIntlvEn */
cc6_base |= intlv_en ^ 0x7;
/* pin at [47:24] */
cc6_base <<= 24;
if (!intlv_en)
return cc6_base | (addr & GENMASK(0, 23));
amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_BASE, &tmp);
/* faster log2 */
tmp_addr = (addr & GENMASK(12, 23)) << __fls(intlv_en + 1);
/* OR DramIntlvSel into bits [14:12] */
tmp_addr |= (tmp & GENMASK(21, 23)) >> 9;
/* add remaining [11:0] bits from original MC4_ADDR */
tmp_addr |= addr & GENMASK(0, 11);
return cc6_base | tmp_addr;
}
return addr;
} }
static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{ {
struct cpuinfo_x86 *c = &boot_cpu_data;
int off = range << 3; int off = range << 3;
amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo); amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo);
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo); amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
if (boot_cpu_data.x86 == 0xf) if (c->x86 == 0xf)
return; return;
if (!dram_rw(pvt, range)) if (!dram_rw(pvt, range))
...@@ -959,6 +1006,31 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) ...@@ -959,6 +1006,31 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi); amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi);
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi); amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
/* Factor in CC6 save area by reading dst node's limit reg */
if (c->x86 == 0x15) {
struct pci_dev *f1 = NULL;
u8 nid = dram_dst_node(pvt, range);
u32 llim;
f1 = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0x18 + nid, 1));
if (WARN_ON(!f1))
return;
amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim);
pvt->ranges[range].lim.lo &= GENMASK(0, 15);
/* {[39:27],111b} */
pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16;
pvt->ranges[range].lim.hi &= GENMASK(0, 7);
/* [47:40] */
pvt->ranges[range].lim.hi |= llim >> 13;
pci_dev_put(f1);
}
} }
static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr, static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
...@@ -1403,12 +1475,8 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range, ...@@ -1403,12 +1475,8 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
return -EINVAL; return -EINVAL;
} }
if (intlv_en && if (intlv_en && (intlv_sel != ((sys_addr >> 12) & intlv_en)))
(intlv_sel != ((sys_addr >> 12) & intlv_en))) {
amd64_warn("Botched intlv bits, en: 0x%x, sel: 0x%x\n",
intlv_en, intlv_sel);
return -EINVAL; return -EINVAL;
}
sys_addr = f1x_swap_interleaved_region(pvt, sys_addr); sys_addr = f1x_swap_interleaved_region(pvt, sys_addr);
......
...@@ -196,6 +196,9 @@ ...@@ -196,6 +196,9 @@
#define DCT_CFG_SEL 0x10C #define DCT_CFG_SEL 0x10C
#define DRAM_LOCAL_NODE_BASE 0x120
#define DRAM_LOCAL_NODE_LIM 0x124
#define DRAM_BASE_HI 0x140 #define DRAM_BASE_HI 0x140
#define DRAM_LIMIT_HI 0x144 #define DRAM_LIMIT_HI 0x144
......
...@@ -458,13 +458,13 @@ static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci, ...@@ -458,13 +458,13 @@ static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
return -EINVAL; return -EINVAL;
new_bw = mci->set_sdram_scrub_rate(mci, bandwidth); new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
if (new_bw >= 0) { if (new_bw < 0) {
edac_printk(KERN_DEBUG, EDAC_MC, "Scrub rate set to %d\n", new_bw); edac_printk(KERN_WARNING, EDAC_MC,
return count; "Error setting scrub rate to: %lu\n", bandwidth);
return -EINVAL;
} }
edac_printk(KERN_DEBUG, EDAC_MC, "Error setting scrub rate to: %lu\n", bandwidth); return count;
return -EINVAL;
} }
/* /*
...@@ -483,7 +483,6 @@ static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data) ...@@ -483,7 +483,6 @@ static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
return bandwidth; return bandwidth;
} }
edac_printk(KERN_DEBUG, EDAC_MC, "Read scrub rate: %d\n", bandwidth);
return sprintf(data, "%d\n", bandwidth); return sprintf(data, "%d\n", bandwidth);
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册