提交 40ecc02e 编写于 作者: D Dmitry Lifshitz 提交者: Tony Lindgren

ARM: dts: sbc-t3530: add support for sbc-t3530

Add support for CM-T3530 CoM and SBC-T3530 board.
Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 dcb27bee
......@@ -198,6 +198,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap2420-n810-wimax.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-cm-t3530.dtb \
omap3-sbc-t3530.dtb \
omap3-cm-t3730.dtb \
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
......
/*
* Support for CompuLab CM-T3530
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap3-cm-t3x30.dtsi"
/ {
model = "CompuLab CM-T3530";
compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
};
/*
* Suppport for CompuLab SBC-T3530 with CM-T3530
*/
#include "omap3-cm-t3530.dts"
#include "omap3-sb-t35.dtsi"
/ {
model = "CompuLab SBC-T3530 with CM-T3530";
compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&sb_t35_usb_hub_pins>;
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
>;
};
};
/*
* The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
* SB-T35 baseboard respectively.
* This setting includes both chips in SBC-T3530 board device tree.
*/
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
&mmc1 {
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
};
......@@ -119,6 +119,11 @@ static void __init omap3_sbc_t3730_legacy_init(void)
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_igep0020_legacy_init(void)
{
omap3_igep2_display_init_of();
......@@ -258,6 +263,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册