Merge tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups (ACPI core, PM core, cpufreq, ACPI
  EC driver, device properties) including three reverts of recent
  intel_pstate driver commits due to a regression introduced by one of
  them plus support for Atom Airmont cores in intel_pstate (which really
  boils down to adding new frequency tables for Airmont) and additional
  turbostat updates.

  Specifics:

   - Revert three recent intel_pstate driver commits one of which
     introduced a regression and the remaining two depend on the
     problematic one (Rafael Wysocki).

   - Fix breakage related to the recently introduced ACPI _CCA object
     support in the PCI DMA setup code (Suravee Suthikulpanit).

   - Fix up the recently introduced ACPI CPPC support to only use the
     hardware-reduced version of the PCCT structure as the only
     architecture to support it (ARM64) will only use hardware-reduced
     ACPI anyway (Ashwin Chaugule).

   - Fix a cpufreq mediatek driver build problem (Arnd Bergmann).

   - Fix the SMBus transaction handling implementation in the ACPI core
     to avoid re-entrant calls to wait_event_timeout() which makes
     intermittent boot stalls related to the Smart Battery Subsystem
     initialization go away and revert a workaround of another problem
     with the same underlying root cause (Chris Bainbridge).

   - Fix the generic wakeup interrupts framework to avoid using invalid
     IRQ numbers (Dmitry Torokhov).

   - Remove a redundant check from the ACPI EC driver (Markus Elfring).

   - Modify the intel_pstate driver so it can support more Atom flavors
     than just one (Baytrail) and add support for Atom Airmont cores
     (which require new freqnency tables) to it (Philippe Longepe).

   - Clean up MSR-related symbols in turbostat (Len Brown)"

* tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: Fix OF logic in pci_dma_configure()
  Revert "Documentation: kernel_parameters for Intel P state driver"
  cpufreq: mediatek: fix build error
  cpufreq: intel_pstate: Add separate support for Airmont cores
  cpufreq: intel_pstate: Replace BYT with ATOM
  Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
  Revert "cpufreq: intel_pstate: Avoid calculation for max/min"
  ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()
  Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
  ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code
  PM / wakeirq: check that wake IRQ is valid before accepting it
  ACPI / CPPC: Use h/w reduced version of the PCCT structure
  x86: remove unused definition of MSR_NHM_PLATFORM_INFO
  tools/power turbostat: use new name for MSR_PLATFORM_INFO

Documentation/kernel-parameters.txt

@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
-		no_acpi
-			Don't use ACPI processor performance control objects
-			_PSS and _PPC specified limits.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

arch/x86/include/asm/msr-index.h

@@ -35,7 +35,7 @@
 #define MSR_IA32_PERFCTR0		0x000000c1
 #define MSR_IA32_PERFCTR1		0x000000c2
 #define MSR_FSB_FREQ			0x000000cd
-#define MSR_NHM_PLATFORM_INFO		0x000000ce
+#define MSR_PLATFORM_INFO		0x000000ce
 
 #define MSR_NHM_SNB_PKG_CST_CFG_CTL	0x000000e2
 #define NHM_C3_AUTO_DEMOTE		(1UL << 25)
@@ -44,7 +44,6 @@
 #define SNB_C1_AUTO_UNDEMOTE		(1UL << 27)
 #define SNB_C3_AUTO_UNDEMOTE		(1UL << 28)
 
-#define MSR_PLATFORM_INFO		0x000000ce
 #define MSR_MTRRcap			0x000000fe
 #define MSR_IA32_BBL_CR_CTL		0x00000119
 #define MSR_IA32_BBL_CR_CTL3		0x0000011e

drivers/acpi/cppc_acpi.c

@@ -304,7 +304,7 @@ EXPORT_SYMBOL_GPL(acpi_get_psd_map);
 
 static int register_pcc_channel(int pcc_subspace_idx)
 {
-	struct acpi_pcct_subspace *cppc_ss;
+	struct acpi_pcct_hw_reduced *cppc_ss;
 	unsigned int len;
 
 	if (pcc_subspace_idx >= 0) {

drivers/acpi/ec.c

@@ -1103,7 +1103,7 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
 	}
 
 err_exit:
-	if (result && q)
+	if (result)
 		acpi_ec_delete_query(q);
 	if (data)
 		*data = value;

drivers/acpi/sbshc.c

@@ -14,7 +14,6 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/dmi.h>
 #include "sbshc.h"
 
 #define PREFIX "ACPI: "
@@ -30,6 +29,7 @@ struct acpi_smb_hc {
 	u8 query_bit;
 	smbus_alarm_callback callback;
 	void *context;
+	bool done;
 };
 
 static int acpi_smbus_hc_add(struct acpi_device *device);
@@ -88,8 +88,6 @@ enum acpi_smb_offset {
 	ACPI_SMB_ALARM_DATA = 0x26,	/* 2 bytes alarm data */
 };
 
-static bool macbook;
-
 static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
 {
 	return ec_read(hc->offset + address, data);
@@ -100,27 +98,11 @@ static inline int smb_hc_write(struct acpi_smb_hc *hc, u8 address, u8 data)
 	return ec_write(hc->offset + address, data);
 }
 
-static inline int smb_check_done(struct acpi_smb_hc *hc)
-{
-	union acpi_smb_status status = {.raw = 0};
-	smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw);
-	return status.fields.done && (status.fields.status == SMBUS_OK);
-}
-
 static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
 {
-	if (wait_event_timeout(hc->wait, smb_check_done(hc),
-			       msecs_to_jiffies(timeout)))
+	if (wait_event_timeout(hc->wait, hc->done, msecs_to_jiffies(timeout)))
 		return 0;
-	/*
-	 * After the timeout happens, OS will try to check the status of SMbus.
-	 * If the status is what OS expected, it will be regarded as the bogus
-	 * timeout.
-	 */
-	if (smb_check_done(hc))
-		return 0;
-	else
-		return -ETIME;
+	return -ETIME;
 }
 
 static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
@@ -135,8 +117,7 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
 	}
 
 	mutex_lock(&hc->lock);
-	if (macbook)
-		udelay(5);
+	hc->done = false;
 	if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
 		goto end;
 	if (temp) {
@@ -235,8 +216,10 @@ static int smbus_alarm(void *context)
 	if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw))
 		return 0;
 	/* Check if it is only a completion notify */
-	if (status.fields.done)
+	if (status.fields.done && status.fields.status == SMBUS_OK) {
+		hc->done = true;
 		wake_up(&hc->wait);
+	}
 	if (!status.fields.alarm)
 		return 0;
 	mutex_lock(&hc->lock);
@@ -262,29 +245,12 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
 			      acpi_handle handle, acpi_ec_query_func func,
 			      void *data);
 
-static int macbook_dmi_match(const struct dmi_system_id *d)
-{
-	pr_debug("Detected MacBook, enabling workaround\n");
-	macbook = true;
-	return 0;
-}
-
-static struct dmi_system_id acpi_smbus_dmi_table[] = {
-	{ macbook_dmi_match, "Apple MacBook", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
-	},
-	{ },
-};
-
 static int acpi_smbus_hc_add(struct acpi_device *device)
 {
 	int status;
 	unsigned long long val;
 	struct acpi_smb_hc *hc;
 
-	dmi_check_system(acpi_smbus_dmi_table);
-
 	if (!device)
 		return -EINVAL;
 

drivers/base/power/wakeirq.c

@@ -68,6 +68,9 @@ int dev_pm_set_wake_irq(struct device *dev, int irq)
 	struct wake_irq *wirq;
 	int err;
 
+	if (irq < 0)
+		return -EINVAL;
+
 	wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
 	if (!wirq)
 		return -ENOMEM;
@@ -167,6 +170,9 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 	struct wake_irq *wirq;
 	int err;
 
+	if (irq < 0)
+		return -EINVAL;
+
 	wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
 	if (!wirq)
 		return -ENOMEM;

drivers/cpufreq/Kconfig.arm

@@ -84,6 +84,7 @@ config ARM_KIRKWOOD_CPUFREQ
 config ARM_MT8173_CPUFREQ
 	bool "Mediatek MT8173 CPUFreq support"
 	depends on ARCH_MEDIATEK && REGULATOR
+	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
 	depends on !CPU_THERMAL || THERMAL=y
 	select PM_OPP
 	help

drivers/cpufreq/Kconfig.x86

@@ -5,7 +5,6 @@
 config X86_INTEL_PSTATE
        bool "Intel P state control"
        depends on X86
-       select ACPI_PROCESSOR if ACPI
        help
           This driver provides a P state for Intel core processors.
 	  The driver implements an internal governor and will become

drivers/cpufreq/intel_pstate.c

@@ -34,14 +34,10 @@
 #include <asm/cpu_device_id.h>
 #include <asm/cpufeature.h>
 
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
-#endif
-
-#define BYT_RATIOS		0x66a
-#define BYT_VIDS		0x66b
-#define BYT_TURBO_RATIOS	0x66c
-#define BYT_TURBO_VIDS		0x66d
+#define ATOM_RATIOS		0x66a
+#define ATOM_VIDS		0x66b
+#define ATOM_TURBO_RATIOS	0x66c
+#define ATOM_TURBO_VIDS		0x66d
 
 #define FRAC_BITS 8
 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
@@ -117,9 +113,6 @@ struct cpudata {
 	u64	prev_mperf;
 	u64	prev_tsc;
 	struct sample sample;
-#if IS_ENABLED(CONFIG_ACPI)
-	struct acpi_processor_performance acpi_perf_data;
-#endif
 };
 
 static struct cpudata **all_cpu_data;
@@ -150,7 +143,6 @@ struct cpu_defaults {
 static struct pstate_adjust_policy pid_params;
 static struct pstate_funcs pstate_funcs;
 static int hwp_active;
-static int no_acpi_perf;
 
 struct perf_limits {
 	int no_turbo;
@@ -163,8 +155,6 @@ struct perf_limits {
 	int max_sysfs_pct;
 	int min_policy_pct;
 	int min_sysfs_pct;
-	int max_perf_ctl;
-	int min_perf_ctl;
 };
 
 static struct perf_limits performance_limits = {
@@ -191,8 +181,6 @@ static struct perf_limits powersave_limits = {
 	.max_sysfs_pct = 100,
 	.min_policy_pct = 0,
 	.min_sysfs_pct = 0,
-	.max_perf_ctl = 0,
-	.min_perf_ctl = 0,
 };
 
 #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
@@ -201,153 +189,6 @@ static struct perf_limits *limits = &performance_limits;
 static struct perf_limits *limits = &powersave_limits;
 #endif
 
-#if IS_ENABLED(CONFIG_ACPI)
-/*
- * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
- * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
- * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
- * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
- * target ratio 0x17. The _PSS control value stores in a format which can be
- * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
- * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
- * This function converts the _PSS control value to intel pstate driver format
- * for comparison and assignment.
- */
-static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
-{
-	return cpu->acpi_perf_data.states[index].control >> 8;
-}
-
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
-	struct cpudata *cpu;
-	int ret;
-	bool turbo_absent = false;
-	int max_pstate_index;
-	int min_pss_ctl, max_pss_ctl, turbo_pss_ctl;
-	int i;
-
-	cpu = all_cpu_data[policy->cpu];
-
-	pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n",
-		 cpu->pstate.min_pstate, cpu->pstate.max_pstate,
-		 cpu->pstate.turbo_pstate);
-
-	if (!cpu->acpi_perf_data.shared_cpu_map &&
-	    zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map,
-				    GFP_KERNEL, cpu_to_node(policy->cpu))) {
-		return -ENOMEM;
-	}
-
-	ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
-						  policy->cpu);
-	if (ret)
-		return ret;
-
-	/*
-	 * Check if the control value in _PSS is for PERF_CTL MSR, which should
-	 * guarantee that the states returned by it map to the states in our
-	 * list directly.
-	 */
-	if (cpu->acpi_perf_data.control_register.space_id !=
-						ACPI_ADR_SPACE_FIXED_HARDWARE)
-		return -EIO;
-
-	pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu);
-	for (i = 0; i < cpu->acpi_perf_data.state_count; i++)
-		pr_debug("     %cP%d: %u MHz, %u mW, 0x%x\n",
-			 (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
-			 (u32) cpu->acpi_perf_data.states[i].core_frequency,
-			 (u32) cpu->acpi_perf_data.states[i].power,
-			 (u32) cpu->acpi_perf_data.states[i].control);
-
-	/*
-	 * If there is only one entry _PSS, simply ignore _PSS and continue as
-	 * usual without taking _PSS into account
-	 */
-	if (cpu->acpi_perf_data.state_count < 2)
-		return 0;
-
-	turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
-	min_pss_ctl = convert_to_native_pstate_format(cpu,
-					cpu->acpi_perf_data.state_count - 1);
-	/* Check if there is a turbo freq in _PSS */
-	if (turbo_pss_ctl <= cpu->pstate.max_pstate &&
-	    turbo_pss_ctl > cpu->pstate.min_pstate) {
-		pr_debug("intel_pstate: no turbo range exists in _PSS\n");
-		limits->no_turbo = limits->turbo_disabled = 1;
-		cpu->pstate.turbo_pstate = cpu->pstate.max_pstate;
-		turbo_absent = true;
-	}
-
-	/* Check if the max non turbo p state < Intel P state max */
-	max_pstate_index = turbo_absent ? 0 : 1;
-	max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index);
-	if (max_pss_ctl < cpu->pstate.max_pstate &&
-	    max_pss_ctl > cpu->pstate.min_pstate)
-		cpu->pstate.max_pstate = max_pss_ctl;
-
-	/* check If min perf > Intel P State min */
-	if (min_pss_ctl > cpu->pstate.min_pstate &&
-	    min_pss_ctl < cpu->pstate.max_pstate) {
-		cpu->pstate.min_pstate = min_pss_ctl;
-		policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling;
-	}
-
-	if (turbo_absent)
-		policy->cpuinfo.max_freq = cpu->pstate.max_pstate *
-						cpu->pstate.scaling;
-	else {
-		policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate *
-						cpu->pstate.scaling;
-		/*
-		 * The _PSS table doesn't contain whole turbo frequency range.
-		 * This just contains +1 MHZ above the max non turbo frequency,
-		 * with control value corresponding to max turbo ratio. But
-		 * when cpufreq set policy is called, it will call with this
-		 * max frequency, which will cause a reduced performance as
-		 * this driver uses real max turbo frequency as the max
-		 * frequeny. So correct this frequency in _PSS table to
-		 * correct max turbo frequency based on the turbo ratio.
-		 * Also need to convert to MHz as _PSS freq is in MHz.
-		 */
-		cpu->acpi_perf_data.states[0].core_frequency =
-						turbo_pss_ctl * 100;
-	}
-
-	pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n",
-		 cpu->pstate.min_pstate, cpu->pstate.max_pstate,
-		 cpu->pstate.turbo_pstate);
-	pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n",
-		 policy->cpuinfo.max_freq, policy->cpuinfo.min_freq);
-
-	return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
-	struct cpudata *cpu;
-
-	if (!no_acpi_perf)
-		return 0;
-
-	cpu = all_cpu_data[policy->cpu];
-	acpi_processor_unregister_performance(policy->cpu);
-	return 0;
-}
-
-#else
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-#endif
-
 static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
 			     int deadband, int integral) {
 	pid->setpoint = setpoint;
@@ -687,31 +528,31 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata)
 	wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
 }
 
-static int byt_get_min_pstate(void)
+static int atom_get_min_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_RATIOS, value);
+	rdmsrl(ATOM_RATIOS, value);
 	return (value >> 8) & 0x7F;
 }
 
-static int byt_get_max_pstate(void)
+static int atom_get_max_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_RATIOS, value);
+	rdmsrl(ATOM_RATIOS, value);
 	return (value >> 16) & 0x7F;
 }
 
-static int byt_get_turbo_pstate(void)
+static int atom_get_turbo_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_TURBO_RATIOS, value);
+	rdmsrl(ATOM_TURBO_RATIOS, value);
 	return value & 0x7F;
 }
 
-static void byt_set_pstate(struct cpudata *cpudata, int pstate)
+static void atom_set_pstate(struct cpudata *cpudata, int pstate)
 {
 	u64 val;
 	int32_t vid_fp;
@@ -736,27 +577,42 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate)
 	wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
 }
 
-#define BYT_BCLK_FREQS 5
-static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
-
-static int byt_get_scaling(void)
+static int silvermont_get_scaling(void)
 {
 	u64 value;
 	int i;
+	/* Defined in Table 35-6 from SDM (Sept 2015) */
+	static int silvermont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000};
 
 	rdmsrl(MSR_FSB_FREQ, value);
-	i = value & 0x3;
+	i = value & 0x7;
+	WARN_ON(i > 4);
 
-	BUG_ON(i > BYT_BCLK_FREQS);
+	return silvermont_freq_table[i];
+}
 
-	return byt_freq_table[i] * 100;
+static int airmont_get_scaling(void)
+{
+	u64 value;
+	int i;
+	/* Defined in Table 35-10 from SDM (Sept 2015) */
+	static int airmont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000,
+		93300, 90000, 88900, 87500};
+
+	rdmsrl(MSR_FSB_FREQ, value);
+	i = value & 0xF;
+	WARN_ON(i > 8);
+
+	return airmont_freq_table[i];
 }
 
-static void byt_get_vid(struct cpudata *cpudata)
+static void atom_get_vid(struct cpudata *cpudata)
 {
 	u64 value;
 
-	rdmsrl(BYT_VIDS, value);
+	rdmsrl(ATOM_VIDS, value);
 	cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
 	cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
 	cpudata->vid.ratio = div_fp(
@@ -764,7 +620,7 @@ static void byt_get_vid(struct cpudata *cpudata)
 		int_tofp(cpudata->pstate.max_pstate -
 			cpudata->pstate.min_pstate));
 
-	rdmsrl(BYT_TURBO_VIDS, value);
+	rdmsrl(ATOM_TURBO_VIDS, value);
 	cpudata->vid.turbo = value & 0x7f;
 }
 
@@ -885,7 +741,7 @@ static struct cpu_defaults core_params = {
 	},
 };
 
-static struct cpu_defaults byt_params = {
+static struct cpu_defaults silvermont_params = {
 	.pid_policy = {
 		.sample_rate_ms = 10,
 		.deadband = 0,
@@ -895,13 +751,33 @@ static struct cpu_defaults byt_params = {
 		.i_gain_pct = 4,
 	},
 	.funcs = {
-		.get_max = byt_get_max_pstate,
-		.get_max_physical = byt_get_max_pstate,
-		.get_min = byt_get_min_pstate,
-		.get_turbo = byt_get_turbo_pstate,
-		.set = byt_set_pstate,
-		.get_scaling = byt_get_scaling,
-		.get_vid = byt_get_vid,
+		.get_max = atom_get_max_pstate,
+		.get_max_physical = atom_get_max_pstate,
+		.get_min = atom_get_min_pstate,
+		.get_turbo = atom_get_turbo_pstate,
+		.set = atom_set_pstate,
+		.get_scaling = silvermont_get_scaling,
+		.get_vid = atom_get_vid,
+	},
+};
+
+static struct cpu_defaults airmont_params = {
+	.pid_policy = {
+		.sample_rate_ms = 10,
+		.deadband = 0,
+		.setpoint = 60,
+		.p_gain_pct = 14,
+		.d_gain_pct = 0,
+		.i_gain_pct = 4,
+	},
+	.funcs = {
+		.get_max = atom_get_max_pstate,
+		.get_max_physical = atom_get_max_pstate,
+		.get_min = atom_get_min_pstate,
+		.get_turbo = atom_get_turbo_pstate,
+		.set = atom_set_pstate,
+		.get_scaling = airmont_get_scaling,
+		.get_vid = atom_get_vid,
 	},
 };
 
@@ -938,23 +814,12 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
 	 * policy, or by cpu specific default values determined through
 	 * experimentation.
 	 */
-	if (limits->max_perf_ctl && limits->max_sysfs_pct >=
-						limits->max_policy_pct) {
-		*max = limits->max_perf_ctl;
-	} else {
-		max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf),
-					limits->max_perf));
-		*max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate,
-			       cpu->pstate.turbo_pstate);
-	}
+	max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
+	*max = clamp_t(int, max_perf_adj,
+			cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
 
-	if (limits->min_perf_ctl) {
-		*min = limits->min_perf_ctl;
-	} else {
-		min_perf = fp_toint(mul_fp(int_tofp(max_perf),
-				    limits->min_perf));
-		*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
-	}
+	min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
+	*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
 }
 
 static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
@@ -1153,7 +1018,7 @@ static void intel_pstate_timer_func(unsigned long __data)
 static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x2a, core_params),
 	ICPU(0x2d, core_params),
-	ICPU(0x37, byt_params),
+	ICPU(0x37, silvermont_params),
 	ICPU(0x3a, core_params),
 	ICPU(0x3c, core_params),
 	ICPU(0x3d, core_params),
@@ -1162,7 +1027,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x45, core_params),
 	ICPU(0x46, core_params),
 	ICPU(0x47, core_params),
-	ICPU(0x4c, byt_params),
+	ICPU(0x4c, airmont_params),
 	ICPU(0x4e, core_params),
 	ICPU(0x4f, core_params),
 	ICPU(0x5e, core_params),
@@ -1229,12 +1094,6 @@ static unsigned int intel_pstate_get(unsigned int cpu_num)
 
 static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 {
-#if IS_ENABLED(CONFIG_ACPI)
-	struct cpudata *cpu;
-	int i;
-#endif
-	pr_debug("intel_pstate: %s max %u policy->max %u\n", __func__,
-		 policy->cpuinfo.max_freq, policy->max);
 	if (!policy->cpuinfo.max_freq)
 		return -ENODEV;
 
@@ -1270,23 +1129,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 	limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
 				  int_tofp(100));
 
-#if IS_ENABLED(CONFIG_ACPI)
-	cpu = all_cpu_data[policy->cpu];
-	for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
-		int control;
-
-		control = convert_to_native_pstate_format(cpu, i);
-		if (control * cpu->pstate.scaling == policy->max)
-			limits->max_perf_ctl = control;
-		if (control * cpu->pstate.scaling == policy->min)
-			limits->min_perf_ctl = control;
-	}
-
-	pr_debug("intel_pstate: max %u policy_max %u perf_ctl [0x%x-0x%x]\n",
-		 policy->cpuinfo.max_freq, policy->max, limits->min_perf_ctl,
-		 limits->max_perf_ctl);
-#endif
-
 	if (hwp_active)
 		intel_pstate_hwp_set();
 
@@ -1341,30 +1183,18 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
 	policy->cpuinfo.max_freq =
 		cpu->pstate.turbo_pstate * cpu->pstate.scaling;
-	if (!no_acpi_perf)
-		intel_pstate_init_perf_limits(policy);
-	/*
-	 * If there is no acpi perf data or error, we ignore and use Intel P
-	 * state calculated limits, So this is not fatal error.
-	 */
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	cpumask_set_cpu(policy->cpu, policy->cpus);
 
 	return 0;
 }
 
-static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
-{
-	return intel_pstate_exit_perf_limits(policy);
-}
-
 static struct cpufreq_driver intel_pstate_driver = {
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.verify		= intel_pstate_verify_policy,
 	.setpolicy	= intel_pstate_set_policy,
 	.get		= intel_pstate_get,
 	.init		= intel_pstate_cpu_init,
-	.exit		= intel_pstate_cpu_exit,
 	.stop_cpu	= intel_pstate_stop_cpu,
 	.name		= "intel_pstate",
 };
@@ -1406,6 +1236,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
 }
 
 #if IS_ENABLED(CONFIG_ACPI)
+#include <acpi/processor.h>
 
 static bool intel_pstate_no_acpi_pss(void)
 {
@@ -1601,9 +1432,6 @@ static int __init intel_pstate_setup(char *str)
 		force_load = 1;
 	if (!strcmp(str, "hwp_only"))
 		hwp_only = 1;
-	if (!strcmp(str, "no_acpi"))
-		no_acpi_perf = 1;
-
 	return 0;
 }
 early_param("intel_pstate", intel_pstate_setup);

drivers/pci/probe.c

@@ -1685,8 +1685,8 @@ static void pci_dma_configure(struct pci_dev *dev)
 {
 	struct device *bridge = pci_get_host_bridge_device(dev);
 
-	if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
-		if (bridge->parent)
+	if (IS_ENABLED(CONFIG_OF) &&
+		bridge->parent && bridge->parent->of_node) {
 			of_dma_configure(&dev->dev, bridge->parent->of_node);
 	} else if (has_acpi_companion(bridge)) {
 		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);

tools/power/x86/turbostat/turbostat.c

@@ -1173,9 +1173,9 @@ dump_nhm_platform_info(void)
 	unsigned long long msr;
 	unsigned int ratio;
 
-	get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
+	get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
 
-	fprintf(stderr, "cpu%d: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
+	fprintf(stderr, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
 
 	ratio = (msr >> 40) & 0xFF;
 	fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency frequency\n",
@@ -1807,7 +1807,7 @@ void check_permissions()
  *
  * MSR_SMI_COUNT                   0x00000034
  *
- * MSR_NHM_PLATFORM_INFO           0x000000ce
+ * MSR_PLATFORM_INFO               0x000000ce
  * MSR_NHM_SNB_PKG_CST_CFG_CTL     0x000000e2
  *
  * MSR_PKG_C3_RESIDENCY            0x000003f8
@@ -1876,7 +1876,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model)
 	get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
 	pkg_cstate_limit = pkg_cstate_limits[msr & 0xF];
 
-	get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
+	get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
 	base_ratio = (msr >> 8) & 0xFF;
 
 	base_hz = base_ratio * bclk * 1000000;