Input: add driver for Touchright serial touchscreens

Signed-off-by: NRick Koch <n1gp@hotmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

drivers/input/touchscreen/Kconfig

@@ -120,4 +120,16 @@ config TOUCHSCREEN_PENMOUNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.
 
+config TOUCHSCREEN_TOUCHRIGHT
+	tristate "Touchright serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Touchright serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchright.
+
 endif

drivers/input/touchscreen/Makefile

@@ -13,3 +13,4 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o

drivers/input/touchscreen/touchright.c

+/*
+ * Touchright serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Touchright serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define TR_FORMAT_TOUCH_BIT	0x01
+#define TR_FORMAT_STATUS_BYTE	0x40
+#define TR_FORMAT_STATUS_MASK	~TR_FORMAT_TOUCH_BIT
+
+#define TR_LENGTH 5
+
+#define TR_MIN_XC 0
+#define TR_MAX_XC 0x1ff
+#define TR_MIN_YC 0
+#define TR_MAX_YC 0x1ff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct tr {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[TR_LENGTH];
+	char phys[32];
+};
+
+static irqreturn_t tr_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct tr *tr = serio_get_drvdata(serio);
+	struct input_dev *dev = tr->dev;
+
+	tr->data[tr->idx] = data;
+
+	if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) {
+		if (++tr->idx == TR_LENGTH) {
+			input_regs(dev, regs);
+			input_report_abs(dev, ABS_X,
+				(tr->data[1] << 5) | (tr->data[2] >> 1));
+			input_report_abs(dev, ABS_Y,
+				(tr->data[3] << 5) | (tr->data[4] >> 1));
+			input_report_key(dev, BTN_TOUCH,
+				tr->data[0] & TR_FORMAT_TOUCH_BIT);
+			input_sync(dev);
+			tr->idx = 0;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * tr_disconnect() is the opposite of tr_connect()
+ */
+
+static void tr_disconnect(struct serio *serio)
+{
+	struct tr *tr = serio_get_drvdata(serio);
+
+	input_get_device(tr->dev);
+	input_unregister_device(tr->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(tr->dev);
+	kfree(tr);
+}
+
+/*
+ * tr_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchright protocol and registers it as
+ * an input device.
+ */
+
+static int tr_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct tr *tr;
+	struct input_dev *input_dev;
+	int err;
+
+	tr = kzalloc(sizeof(struct tr), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tr || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	tr->serio = serio;
+	tr->dev = input_dev;
+	snprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys);
+
+	input_dev->private = tr;
+	input_dev->name = "Touchright Serial TouchScreen";
+	input_dev->phys = tr->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHRIGHT;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0);
+	input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, tr);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(tr->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(tr);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id tr_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHRIGHT,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, tr_serio_ids);
+
+static struct serio_driver tr_drv = {
+	.driver		= {
+		.name	= "touchright",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= tr_serio_ids,
+	.interrupt	= tr_interrupt,
+	.connect	= tr_connect,
+	.disconnect	= tr_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init tr_init(void)
+{
+	serio_register_driver(&tr_drv);
+	return 0;
+}
+
+static void __exit tr_exit(void)
+{
+	serio_unregister_driver(&tr_drv);
+}
+
+module_init(tr_init);
+module_exit(tr_exit);

include/linux/serio.h

@@ -218,5 +218,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_ELO	0x29
 #define SERIO_MICROTOUCH	0x30
 #define SERIO_PENMOUNT	0x31
+#define SERIO_TOUCHRIGHT	0x32
 
 #endif