提交 3fe24032 编写于 作者: D Dylan Reid 提交者: Mark Brown

ASoC: simple-card: Add mic and hp detect gpios.

Allow Headphone and Microphone jack detect gpios to be specified in
device tree.  This will allow a few systems including rk3288_max98090
to use simple-card instead of having their own board file.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 04a0b8ef
......@@ -17,6 +17,10 @@ Optional properties:
source.
- simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec
mclk.
- simple-audio-card,hp_det_gpio : Reference to GPIO that signals when
headphones are attached.
- simple-audio-card,mic_det_gpio : Reference to GPIO that signals when
a microphone is attached.
Optional subnodes:
......
......@@ -10,10 +10,13 @@
*/
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <sound/jack.h>
#include <sound/simple_card.h>
#include <sound/soc-dai.h>
#include <sound/soc.h>
......@@ -25,6 +28,8 @@ struct simple_card_data {
struct asoc_simple_dai codec_dai;
} *dai_props;
unsigned int mclk_fs;
int gpio_hp_det;
int gpio_mic_det;
struct snd_soc_dai_link dai_link[]; /* dynamically allocated */
};
......@@ -54,6 +59,32 @@ static struct snd_soc_ops asoc_simple_card_ops = {
.hw_params = asoc_simple_card_hw_params,
};
static struct snd_soc_jack simple_card_hp_jack;
static struct snd_soc_jack_pin simple_card_hp_jack_pins[] = {
{
.pin = "Headphones",
.mask = SND_JACK_HEADPHONE,
},
};
static struct snd_soc_jack_gpio simple_card_hp_jack_gpio = {
.name = "Headphone detection",
.report = SND_JACK_HEADPHONE,
.debounce_time = 150,
};
static struct snd_soc_jack simple_card_mic_jack;
static struct snd_soc_jack_pin simple_card_mic_jack_pins[] = {
{
.pin = "Mic Jack",
.mask = SND_JACK_MICROPHONE,
},
};
static struct snd_soc_jack_gpio simple_card_mic_jack_gpio = {
.name = "Mic detection",
.report = SND_JACK_MICROPHONE,
.debounce_time = 150,
};
static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai,
struct asoc_simple_dai *set)
{
......@@ -109,6 +140,28 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd)
if (ret < 0)
return ret;
if (gpio_is_valid(priv->gpio_hp_det)) {
snd_soc_jack_new(codec->codec, "Headphones", SND_JACK_HEADPHONE,
&simple_card_hp_jack);
snd_soc_jack_add_pins(&simple_card_hp_jack,
ARRAY_SIZE(simple_card_hp_jack_pins),
simple_card_hp_jack_pins);
simple_card_hp_jack_gpio.gpio = priv->gpio_hp_det;
snd_soc_jack_add_gpios(&simple_card_hp_jack, 1,
&simple_card_hp_jack_gpio);
}
if (gpio_is_valid(priv->gpio_mic_det)) {
snd_soc_jack_new(codec->codec, "Mic Jack", SND_JACK_MICROPHONE,
&simple_card_mic_jack);
snd_soc_jack_add_pins(&simple_card_mic_jack,
ARRAY_SIZE(simple_card_mic_jack_pins),
simple_card_mic_jack_pins);
simple_card_mic_jack_gpio.gpio = priv->gpio_mic_det;
snd_soc_jack_add_gpios(&simple_card_mic_jack, 1,
&simple_card_mic_jack_gpio);
}
return 0;
}
......@@ -383,6 +436,16 @@ static int asoc_simple_card_parse_of(struct device_node *node,
return ret;
}
priv->gpio_hp_det = of_get_named_gpio(node,
"simple-audio-card,hp-det-gpio", 0);
if (priv->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
priv->gpio_mic_det = of_get_named_gpio(node,
"simple-audio-card,mic-det-gpio", 0);
if (priv->gpio_mic_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!priv->snd_card.name)
priv->snd_card.name = priv->snd_card.dai_link->name;
......@@ -502,6 +565,16 @@ static int asoc_simple_card_probe(struct platform_device *pdev)
static int asoc_simple_card_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct simple_card_data *priv = snd_soc_card_get_drvdata(card);
if (gpio_is_valid(priv->gpio_hp_det))
snd_soc_jack_free_gpios(&simple_card_hp_jack, 1,
&simple_card_hp_jack_gpio);
if (gpio_is_valid(priv->gpio_mic_det))
snd_soc_jack_free_gpios(&simple_card_mic_jack, 1,
&simple_card_mic_jack_gpio);
return asoc_simple_card_unref(pdev);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册