be2iscsi : Fix the retry count for boot targets

 Increment the retry count to get the boot target info when
 port async event is received by the driver. Update sysfs enteries
 with the boot target  parameters.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

drivers/scsi/be2iscsi/be_cmds.c

@@ -452,6 +452,7 @@ void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
 		    ((evt->port_link_status & ASYNC_EVENT_LOGICAL) &&
 		     (evt->port_fault == BEISCSI_PHY_LINK_FAULT_NONE))) {
 		phba->state = BE_ADAPTER_LINK_UP | BE_ADAPTER_CHECK_BOOT;
+		phba->get_boot = BE_GET_BOOT_RETRIES;
 
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT,
@@ -480,6 +481,7 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba)
 				case ASYNC_EVENT_NEW_ISCSI_CONN:
 				case ASYNC_EVENT_NEW_TCP_CONN:
 					phba->state |= BE_ADAPTER_CHECK_BOOT;
+					phba->get_boot = BE_GET_BOOT_RETRIES;
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_CONFIG |
 						    BEISCSI_LOG_MBOX,
@@ -488,6 +490,8 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba)
 						    compl->flags);
 					break;
 				default:
+					phba->state |= BE_ADAPTER_CHECK_BOOT;
+					phba->get_boot = BE_GET_BOOT_RETRIES;
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_CONFIG |
 						    BEISCSI_LOG_MBOX,

drivers/scsi/be2iscsi/be_main.c

@@ -2037,11 +2037,16 @@ static void  beiscsi_process_mcc_isr(struct beiscsi_hba *phba)
 				/* Interpret compl as a async link evt */
 				beiscsi_async_link_state_process(phba,
 				(struct be_async_event_link_state *) mcc_compl);
-			else
+			else {
 				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_MBOX,
 					    "BM_%d :  Unsupported Async Event, flags"
 					    " = 0x%08x\n",
 					    mcc_compl->flags);
+				if (phba->state & BE_ADAPTER_LINK_UP) {
+					phba->state |= BE_ADAPTER_CHECK_BOOT;
+					phba->get_boot = BE_GET_BOOT_RETRIES;
+				}
+			}
 		} else if (mcc_compl->flags & CQE_FLAGS_COMPLETED_MASK) {
 			be_mcc_compl_process_isr(&phba->ctrl, mcc_compl);
 			atomic_dec(&phba->ctrl.mcc_obj.q.used);
@@ -4328,8 +4333,14 @@ static int beiscsi_get_boot_info(struct beiscsi_hba *phba)
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
 			    "BM_%d : No boot session\n");
+
+		if (ret == -ENXIO)
+			phba->get_boot = 0;
+
+
 		return ret;
 	}
+	phba->get_boot = 0;
 	nonemb_cmd.va = pci_zalloc_consistent(phba->ctrl.pdev,
 					      sizeof(*session_resp),
 					      &nonemb_cmd.dma);
@@ -5374,8 +5385,14 @@ beiscsi_hw_health_check(struct work_struct *work)
 	be_eqd_update(phba);
 
 	if (phba->state & BE_ADAPTER_CHECK_BOOT) {
-		phba->state &= ~BE_ADAPTER_CHECK_BOOT;
-		be_check_boot_session(phba);
+		if ((phba->get_boot > 0) && (!phba->boot_kset)) {
+			phba->get_boot--;
+			if (!(phba->get_boot % BE_GET_BOOT_TO))
+				be_check_boot_session(phba);
+		} else {
+			phba->state &= ~BE_ADAPTER_CHECK_BOOT;
+			phba->get_boot = 0;
+		}
 	}
 
 	beiscsi_ue_detect(phba);

drivers/scsi/be2iscsi/be_main.h

@@ -109,6 +109,9 @@
 
 #define BEISCSI_CLEAN_UNLOAD	0x01
 #define BEISCSI_EEH_UNLOAD	0x02
+
+#define BE_GET_BOOT_RETRIES	45
+#define BE_GET_BOOT_TO		20
 /**
  * hardware needs the async PDU buffers to be posted in multiples of 8
  * So have atleast 8 of them by default
@@ -413,6 +416,7 @@ struct beiscsi_hba {
 	} fw_config;
 
 	unsigned int state;
+	int get_boot;
 	bool fw_timeout;
 	bool ue_detected;
 	struct delayed_work beiscsi_hw_check_task;