[ARM] 4089/1: AT91: GPIO wake IRQ cleanup

Cleanup of at91 platform level gpio wake and suspend/resume logic.

The GPIO core now delegates wakeups to the parent AIC by refcounting,
and delegates clock management to the clock API.  This makes these
system modules more independent of each other, which is cleaner and will
also help with the AT91SAM9263 (where some GPIO controllers share the
same irq and clock).

Original patch by David Brownell.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-at91rm9200/gpio.c

@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/hardware.h>
 #include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
@@ -224,17 +223,17 @@ static u32 backups[MAX_GPIO_BANKS];
 static int gpio_irq_set_wake(unsigned pin, unsigned state)
 {
 	unsigned	mask = pin_to_mask(pin);
+	unsigned	bank = (pin - PIN_BASE) / 32;
 
-	pin -= PIN_BASE;
-	pin /= 32;
-
-	if (unlikely(pin >= MAX_GPIO_BANKS))
+	if (unlikely(bank >= MAX_GPIO_BANKS))
 		return -EINVAL;
 
 	if (state)
-		wakeups[pin] |= mask;
+		wakeups[bank] |= mask;
 	else
-		wakeups[pin] &= ~mask;
+		wakeups[bank] &= ~mask;
+
+	set_irq_wake(gpio[bank].id, state);
 
 	return 0;
 }
@@ -246,29 +245,15 @@ void at91_gpio_suspend(void)
 	for (i = 0; i < gpio_banks; i++) {
 		u32 pio = gpio[i].offset;
 
-		/*
-		 * Note: drivers should have disabled GPIO interrupts that
-		 * aren't supposed to be wakeup sources.
-		 * But that is not much good on ARM.....  disable_irq() does
-		 * not update the hardware immediately, so the hardware mask
-		 * (IMR) has the wrong value (not current, too much is
-		 * permitted).
-		 *
-		 * Our workaround is to disable all non-wakeup IRQs ...
-		 * which is exactly what correct drivers asked for in the
-		 * first place!
-		 */
 		backups[i] = at91_sys_read(pio + PIO_IMR);
 		at91_sys_write(pio + PIO_IDR, backups[i]);
 		at91_sys_write(pio + PIO_IER, wakeups[i]);
 
-		if (!wakeups[i]) {
-			disable_irq_wake(gpio[i].id);
-			at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
-		} else {
-			enable_irq_wake(gpio[i].id);
+		if (!wakeups[i])
+			clk_disable(gpio[i].clock);
+		else {
 #ifdef CONFIG_PM_DEBUG
-			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
 #endif
 		}
 	}
@@ -281,9 +266,11 @@ void at91_gpio_resume(void)
 	for (i = 0; i < gpio_banks; i++) {
 		u32 pio = gpio[i].offset;
 
+		if (!wakeups[i])
+			clk_enable(gpio[i].clock);
+
 		at91_sys_write(pio + PIO_IDR, wakeups[i]);
 		at91_sys_write(pio + PIO_IER, backups[i]);
-		at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
 	}
 }