提交 3cca2606 编写于 作者: A Achiad Shochat 提交者: Doug Ledford

IB/mlx5: Support IB device's callbacks for adding/deleting GIDs

These callbacks write into the mlx5 RoCE address table.
Upon del_gid we write a zero'd GID.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 cb34be6d
......@@ -165,6 +165,93 @@ static int mlx5_query_port_roce(struct ib_device *device, u8 port_num,
return 0;
}
static void ib_gid_to_mlx5_roce_addr(const union ib_gid *gid,
const struct ib_gid_attr *attr,
void *mlx5_addr)
{
#define MLX5_SET_RA(p, f, v) MLX5_SET(roce_addr_layout, p, f, v)
char *mlx5_addr_l3_addr = MLX5_ADDR_OF(roce_addr_layout, mlx5_addr,
source_l3_address);
void *mlx5_addr_mac = MLX5_ADDR_OF(roce_addr_layout, mlx5_addr,
source_mac_47_32);
if (!gid)
return;
ether_addr_copy(mlx5_addr_mac, attr->ndev->dev_addr);
if (is_vlan_dev(attr->ndev)) {
MLX5_SET_RA(mlx5_addr, vlan_valid, 1);
MLX5_SET_RA(mlx5_addr, vlan_id, vlan_dev_vlan_id(attr->ndev));
}
switch (attr->gid_type) {
case IB_GID_TYPE_IB:
MLX5_SET_RA(mlx5_addr, roce_version, MLX5_ROCE_VERSION_1);
break;
case IB_GID_TYPE_ROCE_UDP_ENCAP:
MLX5_SET_RA(mlx5_addr, roce_version, MLX5_ROCE_VERSION_2);
break;
default:
WARN_ON(true);
}
if (attr->gid_type != IB_GID_TYPE_IB) {
if (ipv6_addr_v4mapped((void *)gid))
MLX5_SET_RA(mlx5_addr, roce_l3_type,
MLX5_ROCE_L3_TYPE_IPV4);
else
MLX5_SET_RA(mlx5_addr, roce_l3_type,
MLX5_ROCE_L3_TYPE_IPV6);
}
if ((attr->gid_type == IB_GID_TYPE_IB) ||
!ipv6_addr_v4mapped((void *)gid))
memcpy(mlx5_addr_l3_addr, gid, sizeof(*gid));
else
memcpy(&mlx5_addr_l3_addr[12], &gid->raw[12], 4);
}
static int set_roce_addr(struct ib_device *device, u8 port_num,
unsigned int index,
const union ib_gid *gid,
const struct ib_gid_attr *attr)
{
struct mlx5_ib_dev *dev = to_mdev(device);
u32 in[MLX5_ST_SZ_DW(set_roce_address_in)];
u32 out[MLX5_ST_SZ_DW(set_roce_address_out)];
void *in_addr = MLX5_ADDR_OF(set_roce_address_in, in, roce_address);
enum rdma_link_layer ll = mlx5_ib_port_link_layer(device, port_num);
if (ll != IB_LINK_LAYER_ETHERNET)
return -EINVAL;
memset(in, 0, sizeof(in));
ib_gid_to_mlx5_roce_addr(gid, attr, in_addr);
MLX5_SET(set_roce_address_in, in, roce_address_index, index);
MLX5_SET(set_roce_address_in, in, opcode, MLX5_CMD_OP_SET_ROCE_ADDRESS);
memset(out, 0, sizeof(out));
return mlx5_cmd_exec(dev->mdev, in, sizeof(in), out, sizeof(out));
}
static int mlx5_ib_add_gid(struct ib_device *device, u8 port_num,
unsigned int index, const union ib_gid *gid,
const struct ib_gid_attr *attr,
__always_unused void **context)
{
return set_roce_addr(device, port_num, index, gid, attr);
}
static int mlx5_ib_del_gid(struct ib_device *device, u8 port_num,
unsigned int index, __always_unused void **context)
{
return set_roce_addr(device, port_num, index, NULL, NULL);
}
static int mlx5_use_mad_ifc(struct mlx5_ib_dev *dev)
{
return !dev->mdev->issi;
......@@ -1515,6 +1602,8 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
if (ll == IB_LINK_LAYER_ETHERNET)
dev->ib_dev.get_netdev = mlx5_ib_get_netdev;
dev->ib_dev.query_gid = mlx5_ib_query_gid;
dev->ib_dev.add_gid = mlx5_ib_add_gid;
dev->ib_dev.del_gid = mlx5_ib_del_gid;
dev->ib_dev.query_pkey = mlx5_ib_query_pkey;
dev->ib_dev.modify_device = mlx5_ib_modify_device;
dev->ib_dev.modify_port = mlx5_ib_modify_port;
......
......@@ -278,6 +278,26 @@ enum {
MLX5_DEV_CAP_FLAG_CMDIF_CSUM = 3LL << 46,
};
enum {
MLX5_ROCE_VERSION_1 = 0,
MLX5_ROCE_VERSION_2 = 2,
};
enum {
MLX5_ROCE_VERSION_1_CAP = 1 << MLX5_ROCE_VERSION_1,
MLX5_ROCE_VERSION_2_CAP = 1 << MLX5_ROCE_VERSION_2,
};
enum {
MLX5_ROCE_L3_TYPE_IPV4 = 0,
MLX5_ROCE_L3_TYPE_IPV6 = 1,
};
enum {
MLX5_ROCE_L3_TYPE_IPV4_CAP = 1 << 1,
MLX5_ROCE_L3_TYPE_IPV6_CAP = 1 << 2,
};
enum {
MLX5_OPCODE_NOP = 0x00,
MLX5_OPCODE_SEND_INVAL = 0x01,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册