提交 3b2946cc 编写于 作者: M Mark Haverkamp 提交者: James Bottomley

[SCSI] aacraid: Fix aacraid probe breakage (updated)

This patch fixes the bad assumption of the aacraid driver with use_sg.
I used the 3w-xxxx driver fix as a guide for this.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 ebd8bb76
......@@ -349,6 +349,27 @@ static void aac_io_done(struct scsi_cmnd * scsicmd)
spin_unlock_irqrestore(host->host_lock, cpu_flags);
}
static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len)
{
void *buf;
unsigned int transfer_len;
struct scatterlist *sg = scsicmd->request_buffer;
if (scsicmd->use_sg) {
buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
transfer_len = min(sg->length, len + offset);
} else {
buf = scsicmd->request_buffer;
transfer_len = min(scsicmd->request_bufflen, len + offset);
}
memcpy(buf + offset, data, transfer_len - offset);
if (scsicmd->use_sg)
kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
static void get_container_name_callback(void *context, struct fib * fibptr)
{
struct aac_get_name_resp * get_name_reply;
......@@ -364,18 +385,22 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
/* Failure is irrelevant, using default value instead */
if ((le32_to_cpu(get_name_reply->status) == CT_OK)
&& (get_name_reply->data[0] != '\0')) {
int count;
char * dp;
char * sp = get_name_reply->data;
char *sp = get_name_reply->data;
sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
while (*sp == ' ')
++sp;
count = sizeof(((struct inquiry_data *)NULL)->inqd_pid);
dp = ((struct inquiry_data *)scsicmd->request_buffer)->inqd_pid;
if (*sp) do {
*dp++ = (*sp) ? *sp++ : ' ';
} while (--count > 0);
if (*sp) {
char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
int count = sizeof(d);
char *dp = d;
do {
*dp++ = (*sp) ? *sp++ : ' ';
} while (--count > 0);
aac_internal_transfer(scsicmd, d,
offsetof(struct inquiry_data, inqd_pid), sizeof(d));
}
}
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
fib_complete(fibptr);
......@@ -1344,44 +1369,45 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
switch (scsicmd->cmnd[0]) {
case INQUIRY:
{
struct inquiry_data *inq_data_ptr;
struct inquiry_data inq_data;
dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", scsicmd->device->id));
inq_data_ptr = (struct inquiry_data *)scsicmd->request_buffer;
memset(inq_data_ptr, 0, sizeof (struct inquiry_data));
memset(&inq_data, 0, sizeof (struct inquiry_data));
inq_data_ptr->inqd_ver = 2; /* claim compliance to SCSI-2 */
inq_data_ptr->inqd_dtq = 0x80; /* set RMB bit to one indicating that the medium is removable */
inq_data_ptr->inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
inq_data_ptr->inqd_len = 31;
inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */
inq_data.inqd_dtq = 0x80; /* set RMB bit to one indicating that the medium is removable */
inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
inq_data.inqd_len = 31;
/*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
inq_data_ptr->inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
inq_data.inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
/*
* Set the Vendor, Product, and Revision Level
* see: <vendor>.c i.e. aac.c
*/
if (scsicmd->device->id == host->this_id) {
setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), (sizeof(container_types)/sizeof(char *)));
inq_data_ptr->inqd_pdt = INQD_PDT_PROC; /* Processor device */
setinqstr(cardtype, (void *) (inq_data.inqd_vid), (sizeof(container_types)/sizeof(char *)));
inq_data.inqd_pdt = INQD_PDT_PROC; /* Processor device */
aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
return 0;
}
setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), fsa_dev_ptr[cid].type);
inq_data_ptr->inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
setinqstr(cardtype, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
return aac_get_container_name(scsicmd, cid);
}
case READ_CAPACITY:
{
u32 capacity;
char *cp;
char cp[8];
dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
if (fsa_dev_ptr[cid].size <= 0x100000000LL)
capacity = fsa_dev_ptr[cid].size - 1;
else
capacity = (u32)-1;
cp = scsicmd->request_buffer;
cp[0] = (capacity >> 24) & 0xff;
cp[1] = (capacity >> 16) & 0xff;
cp[2] = (capacity >> 8) & 0xff;
......@@ -1390,6 +1416,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
cp[5] = 0;
cp[6] = 2;
cp[7] = 0;
aac_internal_transfer(scsicmd, cp, 0, sizeof(cp));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
......@@ -1399,15 +1426,15 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case MODE_SENSE:
{
char *mode_buf;
char mode_buf[4];
dprintk((KERN_DEBUG "MODE SENSE command.\n"));
mode_buf = scsicmd->request_buffer;
mode_buf[0] = 3; /* Mode data length */
mode_buf[1] = 0; /* Medium type - default */
mode_buf[2] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected */
mode_buf[3] = 0; /* Block descriptor length */
aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
......@@ -1415,10 +1442,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
}
case MODE_SENSE_10:
{
char *mode_buf;
char mode_buf[8];
dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
mode_buf = scsicmd->request_buffer;
mode_buf[0] = 0; /* Mode data length (MSB) */
mode_buf[1] = 6; /* Mode data length (LSB) */
mode_buf[2] = 0; /* Medium type - default */
......@@ -1427,6 +1453,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
mode_buf[5] = 0; /* reserved */
mode_buf[6] = 0; /* Block descriptor length (MSB) */
mode_buf[7] = 0; /* Block descriptor length (LSB) */
aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册