pcmcia: Remove m8xx_pcmcia driver

This driver doesn't build, and apparently has not built since
arch/ppc was removed in 2008 (when mk_int_int_mask was removed
from asm/irq.h, among other build errors).

A few weeks ago I asked whether anyone was actively maintaining
this code, and got no positive response:
http://patchwork.ozlabs.org/patch/352082/

So, let's remove it.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Paul Bolle <pebolle@tiscali.nl>

arch/powerpc/include/asm/mpc8xx.h

@@ -7,6 +7,4 @@
 #ifndef __CONFIG_8xx_DEFS
 #define __CONFIG_8xx_DEFS
 
-extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
 #endif /* __CONFIG_8xx_DEFS */

arch/powerpc/platforms/8xx/m8xx_setup.c

@@ -28,8 +28,6 @@
 
 #include "mpc8xx.h"
 
-struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
 extern int cpm_pic_init(void);
 extern int cpm_get_irq(void);
 

arch/powerpc/platforms/8xx/mpc885ads_setup.c

@@ -46,61 +46,6 @@
 
 static u32 __iomem *bcsr, *bcsr5;
 
-#ifdef CONFIG_PCMCIA_M8XX
-static void pcmcia_hw_setup(int slot, int enable)
-{
-	if (enable)
-		clrbits32(&bcsr[1], BCSR1_PCCEN);
-	else
-		setbits32(&bcsr[1], BCSR1_PCCEN);
-}
-
-static int pcmcia_set_voltage(int slot, int vcc, int vpp)
-{
-	u32 reg = 0;
-
-	switch (vcc) {
-	case 0:
-		break;
-	case 33:
-		reg |= BCSR1_PCCVCC0;
-		break;
-	case 50:
-		reg |= BCSR1_PCCVCC1;
-		break;
-	default:
-		return 1;
-	}
-
-	switch (vpp) {
-	case 0:
-		break;
-	case 33:
-	case 50:
-		if (vcc == vpp)
-			reg |= BCSR1_PCCVPP1;
-		else
-			return 1;
-		break;
-	case 120:
-		if ((vcc == 33) || (vcc == 50))
-			reg |= BCSR1_PCCVPP0;
-		else
-			return 1;
-	default:
-		return 1;
-	}
-
-	/* first, turn off all power */
-	clrbits32(&bcsr[1], 0x00610000);
-
-	/* enable new powersettings */
-	setbits32(&bcsr[1], reg);
-
-	return 0;
-}
-#endif
-
 struct cpm_pin {
 	int port, pin, flags;
 };
@@ -245,12 +190,6 @@ static void __init mpc885ads_setup_arch(void)
 		of_detach_node(np);
 		of_node_put(np);
 	}
-
-#ifdef CONFIG_PCMCIA_M8XX
-	/* Set up board specific hook-ups.*/
-	m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
-	m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
-#endif
 }
 
 static int __init mpc885ads_probe(void)

drivers/pcmcia/Kconfig

@@ -144,16 +144,6 @@ config TCIC
 	  "Bridge" is the name used for the hardware inside your computer that
 	  PCMCIA cards are plugged into. If unsure, say N.
 
-config PCMCIA_M8XX
-	tristate "MPC8xx PCMCIA support"
-	depends on PCCARD && PPC && 8xx
-	select PCCARD_IODYN if PCMCIA != n
-	help
-	  Say Y here to include support for PowerPC 8xx series PCMCIA
-	  controller.
-
-	  This driver is also available as a module called m8xx_pcmcia.
-
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 	depends on MIPS_ALCHEMY && PCMCIA

drivers/pcmcia/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_PD6729)				+= pd6729.o
 obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
-obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_SOC_COMMON)			+= soc_common.o
 obj-$(CONFIG_PCMCIA_SA11XX_BASE)		+= sa11xx_base.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa1100_cs.o