V4L/DVB (11215): zl10353: add support for Intel CE6230 and Intel CE6231

Add chip IDs and configuration registers needed for Intel CE6230 and
Intel CE6231.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/zl10353.c

@@ -572,6 +572,10 @@ static int zl10353_init(struct dvb_frontend *fe)
 		zl10353_dump_regs(fe);
 	if (state->config.parallel_ts)
 		zl10353_reset_attach[2] &= ~0x20;
+	if (state->config.clock_ctl_1)
+		zl10353_reset_attach[3] = state->config.clock_ctl_1;
+	if (state->config.pll_0)
+		zl10353_reset_attach[4] = state->config.pll_0;
 
 	/* Do a "hard" reset if not already done */
 	if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] ||
@@ -614,6 +618,7 @@ struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
 				    struct i2c_adapter *i2c)
 {
 	struct zl10353_state *state = NULL;
+	int id;
 
 	/* allocate memory for the internal state */
 	state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL);
@@ -625,7 +630,8 @@ struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
 	memcpy(&state->config, config, sizeof(struct zl10353_config));
 
 	/* check if the demod is there */
-	if (zl10353_read_register(state, CHIP_ID) != ID_ZL10353)
+	id = zl10353_read_register(state, CHIP_ID);
+	if ((id != ID_ZL10353) && (id != ID_CE6230) && (id != ID_CE6231))
 		goto error;
 
 	/* create dvb_frontend */

drivers/media/dvb/frontends/zl10353.h

@@ -41,6 +41,10 @@ struct zl10353_config
 
 	/* set if i2c_gate_ctrl disable is required */
 	u8 disable_i2c_gate_ctrl:1;
+
+	/* clock control registers (0x51-0x54) */
+	u8 clock_ctl_1;  /* default: 0x46 */
+	u8 pll_0;        /* default: 0x15 */
 };
 
 #if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))

drivers/media/dvb/frontends/zl10353_priv.h

@@ -22,7 +22,9 @@
 #ifndef _ZL10353_PRIV_
 #define _ZL10353_PRIV_
 
-#define ID_ZL10353	0x14
+#define ID_ZL10353	0x14 /* Zarlink ZL10353 */
+#define ID_CE6230	0x18 /* Intel CE6230 */
+#define ID_CE6231	0x19 /* Intel CE6231 */
 
 #define msb(x) (((x) >> 8) & 0xff)
 #define lsb(x) ((x) & 0xff)
@@ -50,6 +52,10 @@ enum zl10353_reg_addr {
 	TPS_RECEIVED_0     = 0x1E,
 	TPS_CURRENT_1      = 0x1F,
 	TPS_CURRENT_0      = 0x20,
+	CLOCK_CTL_0        = 0x51,
+	CLOCK_CTL_1        = 0x52,
+	PLL_0              = 0x53,
+	PLL_1              = 0x54,
 	RESET              = 0x55,
 	AGC_TARGET         = 0x56,
 	MCLK_RATIO         = 0x5C,