提交 3611431c 编写于 作者: W Wolfram Sang

i2c: i2c-imx: replace platform_driver_probe to support deferred probing

Subsystems like pinctrl and gpio rightfully make use of deferred probing at
core level. Now, deferred drivers won't be retried if they don't have a .probe
function specified in the driver struct. Fix this driver to have that, so the
devices it supports won't get lost in a deferred probe.
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
上级 cccdcea1
......@@ -365,7 +365,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
clk_disable_unprepare(i2c_imx->clk);
}
static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
unsigned int rate)
{
struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
......@@ -589,7 +589,7 @@ static struct i2c_algorithm i2c_imx_algo = {
.functionality = i2c_imx_func,
};
static int __init i2c_imx_probe(struct platform_device *pdev)
static int i2c_imx_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
&pdev->dev);
......@@ -697,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return 0; /* Return OK */
}
static int __exit i2c_imx_remove(struct platform_device *pdev)
static int i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
......@@ -715,7 +715,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
}
static struct platform_driver i2c_imx_driver = {
.remove = __exit_p(i2c_imx_remove),
.probe = i2c_imx_probe,
.remove = i2c_imx_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
......@@ -726,7 +727,7 @@ static struct platform_driver i2c_imx_driver = {
static int __init i2c_adap_imx_init(void)
{
return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe);
return platform_driver_register(&i2c_imx_driver);
}
subsys_initcall(i2c_adap_imx_init);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册