提交 3528cc4e 编写于 作者: A Andrew de Quincy 提交者: Linus Torvalds

[PATCH] dvb: Remove broken stv0299 enhanced tuning code

Remove broken stv0299 enhanced tuning code
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 83b75b04
......@@ -234,7 +234,6 @@ static struct stv0299_config samsung_tbmu24112_config = {
.inittab = samsung_tbmu24112_inittab,
.mclk = 88000000UL,
.invert = 0,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_LK,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......
......@@ -553,49 +553,16 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
if (state->config->invert) invval = (~invval) & 1;
stv0299_writeregI(state, 0x0c, (stv0299_readreg(state, 0x0c) & 0xfe) | invval);
if (state->config->enhanced_tuning) {
/* check if we should do a finetune */
int frequency_delta = p->frequency - state->tuner_frequency;
int minmax = p->u.qpsk.symbol_rate / 2000;
if (minmax < 5000) minmax = 5000;
if ((frequency_delta > -minmax) && (frequency_delta < minmax) && (frequency_delta != 0) &&
(state->fec_inner == p->u.qpsk.fec_inner) &&
(state->symbol_rate == p->u.qpsk.symbol_rate)) {
int Drot_freq = (frequency_delta << 16) / (state->config->mclk / 1000);
// zap the derotator registers first
stv0299_writeregI(state, 0x22, 0x00);
stv0299_writeregI(state, 0x23, 0x00);
// now set them as we want
stv0299_writeregI(state, 0x22, Drot_freq >> 8);
stv0299_writeregI(state, 0x23, Drot_freq);
} else {
/* A "normal" tune is requested */
stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */
state->config->pll_set(fe, state->i2c, p);
stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */
stv0299_writeregI(state, 0x32, 0x80);
stv0299_writeregI(state, 0x22, 0x00);
stv0299_writeregI(state, 0x23, 0x00);
stv0299_writeregI(state, 0x32, 0x19);
stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate);
stv0299_set_FEC (state, p->u.qpsk.fec_inner);
}
} else {
stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */
state->config->pll_set(fe, state->i2c, p);
stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */
stv0299_set_FEC (state, p->u.qpsk.fec_inner);
stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate);
stv0299_writeregI(state, 0x22, 0x00);
stv0299_writeregI(state, 0x23, 0x00);
stv0299_readreg (state, 0x23);
stv0299_writeregI(state, 0x12, 0xb9);
}
stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */
state->config->pll_set(fe, state->i2c, p);
stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */
stv0299_set_FEC (state, p->u.qpsk.fec_inner);
stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate);
stv0299_writeregI(state, 0x22, 0x00);
stv0299_writeregI(state, 0x23, 0x00);
stv0299_readreg (state, 0x23);
stv0299_writeregI(state, 0x12, 0xb9);
state->tuner_frequency = p->frequency;
state->fec_inner = p->u.qpsk.fec_inner;
......
......@@ -73,9 +73,6 @@ struct stv0299_config
/* does the inversion require inversion? */
u8 invert:1;
/* Should the enhanced tuning code be used? */
u8 enhanced_tuning:1;
/* Skip reinitialisation? */
u8 skip_reinit:1;
......
......@@ -1644,7 +1644,6 @@ static struct stv0299_config alps_bsru6_config = {
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......@@ -1721,7 +1720,6 @@ static struct stv0299_config alps_bsbe1_config = {
.inittab = alps_bsbe1_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.min_delay_ms = 100,
.set_symbol_rate = alps_bsru6_set_symbol_rate,
......
......@@ -531,7 +531,6 @@ static struct stv0299_config typhoon_config = {
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
......@@ -546,7 +545,6 @@ static struct stv0299_config cinergy_1200s_config = {
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
......
......@@ -580,7 +580,6 @@ static struct stv0299_config alps_bsru6_config = {
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......@@ -710,7 +709,6 @@ static struct stv0299_config philips_su1278_tt_config = {
.inittab = philips_su1278_tt_inittab,
.mclk = 64000000UL,
.invert = 0,
.enhanced_tuning = 1,
.skip_reinit = 1,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......
......@@ -379,7 +379,6 @@ static struct stv0299_config alps_bsru6_config = {
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......
......@@ -360,7 +360,6 @@ static struct stv0299_config alps_bsru6_config = {
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......@@ -436,7 +435,6 @@ static struct stv0299_config alps_bsbe1_config = {
.inittab = alps_bsbe1_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.min_delay_ms = 100,
.set_symbol_rate = alps_bsru6_set_symbol_rate,
......
......@@ -1335,7 +1335,6 @@ static struct stv0299_config alps_stv0299_config = {
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册