提交 34ef30ca 编写于 作者: T Tony Luck

[IA64] Fix warnings resulting from type-checking in dev_dbg()

Lots of places where we passed a "struct pci_device *" rather than
a "struct device *".  One place where we used a "%s" in the format,
but forgot to provide an argument.
Acked-by: NJohn Keller <jpk@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
上级 8ee4dc39
......@@ -364,7 +364,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
if (!element) {
dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
return;
}
element->sysdata = SN_PCIDEV_INFO(dev);
......
......@@ -249,19 +249,19 @@ static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
if (rc == PCI_SLOT_ALREADY_UP) {
dev_dbg(slot->pci_bus->self, "is already active\n");
dev_dbg(&slot->pci_bus->self->dev, "is already active\n");
return 1; /* return 1 to user */
}
if (rc == PCI_L1_ERR) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message: %s",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (rc) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"insert failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
......@@ -287,25 +287,25 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
if ((action == PCI_REQ_SLOT_ELIGIBLE) &&
(rc == PCI_SLOT_ALREADY_DOWN)) {
dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n");
dev_dbg(&slot->pci_bus->self->dev, "Slot %s already inactive\n", slot->physical_path);
return 1; /* return 1 to user */
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"Cannot remove last 33MHz card\n");
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message \n%s\n",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"remove failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
......@@ -317,12 +317,12 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
if ((action == PCI_REQ_SLOT_DISABLE) && !rc) {
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
dev_dbg(slot->pci_bus->self, "remove successful\n");
dev_dbg(&slot->pci_bus->self->dev, "remove successful\n");
return 0;
}
if ((action == PCI_REQ_SLOT_DISABLE) && rc) {
dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc);
dev_dbg(&slot->pci_bus->self->dev,"remove failed rc = %d\n", rc);
}
return rc;
......@@ -375,7 +375,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
num_funcs = pci_scan_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num + 1, 0));
if (!num_funcs) {
dev_dbg(slot->pci_bus->self, "no device in slot\n");
dev_dbg(&slot->pci_bus->self->dev, "no device in slot\n");
mutex_unlock(&sn_hotplug_mutex);
return -ENODEV;
}
......@@ -427,7 +427,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
if (acpi_bus_get_device(phandle, &pdevice)) {
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"no parent device, assuming NULL\n");
pdevice = NULL;
}
......@@ -479,10 +479,10 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
mutex_unlock(&sn_hotplug_mutex);
if (rc == 0)
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"insert operation successful\n");
else
dev_dbg(slot->pci_bus->self,
dev_dbg(&slot->pci_bus->self->dev,
"insert operation failed rc = %d\n", rc);
return rc;
......@@ -659,16 +659,16 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
if (rc)
goto register_err;
}
dev_dbg(pci_bus->self, "Registered bus with hotplug\n");
dev_dbg(&pci_bus->self->dev, "Registered bus with hotplug\n");
return rc;
register_err:
dev_dbg(pci_bus->self, "bus failed to register with err = %d\n",
dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n",
rc);
alloc_err:
if (rc == -ENOMEM)
dev_dbg(pci_bus->self, "Memory allocation error\n");
dev_dbg(&pci_bus->self->dev, "Memory allocation error\n");
/* destroy THIS element */
if (bss_hotplug_slot)
......@@ -701,10 +701,10 @@ static int sn_pci_hotplug_init(void)
rc = sn_pci_bus_valid(pci_bus);
if (rc != 1) {
dev_dbg(pci_bus->self, "not a valid hotplug bus\n");
dev_dbg(&pci_bus->self->dev, "not a valid hotplug bus\n");
continue;
}
dev_dbg(pci_bus->self, "valid hotplug bus\n");
dev_dbg(&pci_bus->self->dev, "valid hotplug bus\n");
rc = sn_hotplug_slot_register(pci_bus);
if (!rc) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册