omap: 3630sdp: introduce 3630 sdp board support

Add 3630SDP board support

The board shares the same peripherals as a zoom2 main.
So reuse the peripheral file of zoom platform.

Peripheral    zoom2    zoom3  sdp3630
---------------------------------------
Ethernet	smsc	smsc	smc
NOR		n/a     n/a	B
Onenand	  	n/a     n/a	B
HDMI		A	A	B (persent on different i2c)
NAND		A	A	A (same nand)
SDRAM		A	A	A (same sdram)
Keypad		A	A	A (same twl)
Camera		A	A	A (same sensor can be mounted)
LCD Display	A	A	A (same wvga display)
OPPs		A	A	A (same chip feature)
Audio		A	A	A (same audio via twl5030)

OMAP3630 details can be found here:
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606Signed-off-by: NVikram Pandita <vikram.pandita@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/Kconfig

@@ -109,6 +109,10 @@ config MACH_IGEP0020
 	bool "IGEP0020"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP_3630SDP
+	bool "OMAP3630 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4

arch/arm/mach-omap2/Makefile

@@ -83,6 +83,9 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \

arch/arm/mach-omap2/board-3630sdp.c

+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs             = 3,
+	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	board_smc91x_data.gpio_irq = 158;
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
+
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 126,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap_sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel sdp_config[] __initdata = {
+};
+
+static void __init omap_sdp_init_irq(void)
+{
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap_sdp_init(void)
+{
+	zoom_peripherals_init();
+	board_smc91x_init();
+	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_sdp_map_io,
+	.init_irq	= omap_sdp_init_irq,
+	.init_machine	= omap_sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END