perf trace: Use vfs_getname syscall arg beautifier in more syscalls

Those were covered and tested in this cset:

 access, chdir, chmod, chown, chroot, creat, getxattr,
 inotify_add_watch, lchown, lgetxattr, listxattr,
 lsetxattr, mkdir, mkdirat, mknod, rmdir, faccessat,
 newfstatat, openat, readlink, readlinkat, removexattr,
 setxattr, statfs, swapon, swapoff, truncate, unlinkat,
 utime, utimes, utimensat.

E.g.:

  # trace -e statfs,access,mkdir mkdir /tmp/bla
   0.285 (0.020 ms): mkdir/2799 access(filename: /etc/ld.so.preload, mode: R         ) = -1 ENOENT No such file or directory
   1.070 (0.032 ms): mkdir/2799 statfs(pathname: /sys/fs/selinux, buf: 0x7ffeafbdc930) = 0
   1.087 (0.013 ms): mkdir/2799 statfs(pathname: /sys/fs/selinux, buf: 0x7ffeafbdc820) = 0
   1.189 (0.014 ms): mkdir/2799 access(filename: /etc/selinux/config                 ) = 0
   1.905 (0.610 ms): mkdir/2799 mkdir(pathname: /tmp/bla, mode: 511                  ) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wbqtnlktquun3wtpjdz3okul@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

  and an empty message aborts the commit.
上级 f994592d
......@@ -976,14 +976,23 @@ static struct syscall_fmt {
bool hexret;
} syscall_fmts[] = {
{ .name = "access", .errmsg = true,
.arg_scnprintf = { [1] = SCA_ACCMODE, /* mode */ }, },
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */
[1] = SCA_ACCMODE, /* mode */ }, },
{ .name = "arch_prctl", .errmsg = true, .alias = "prctl", },
{ .name = "brk", .hexret = true,
.arg_scnprintf = { [0] = SCA_HEX, /* brk */ }, },
{ .name = "chdir", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "chmod", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "chroot", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "clock_gettime", .errmsg = true, STRARRAY(0, clk_id, clockid), },
{ .name = "close", .errmsg = true,
.arg_scnprintf = { [0] = SCA_CLOSE_FD, /* fd */ }, },
{ .name = "connect", .errmsg = true, },
{ .name = "creat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "dup", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "dup2", .errmsg = true,
......@@ -994,7 +1003,8 @@ static struct syscall_fmt {
{ .name = "eventfd2", .errmsg = true,
.arg_scnprintf = { [1] = SCA_EFD_FLAGS, /* flags */ }, },
{ .name = "faccessat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* filename */ }, },
{ .name = "fadvise64", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "fallocate", .errmsg = true,
......@@ -1008,7 +1018,8 @@ static struct syscall_fmt {
{ .name = "fchown", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "fchownat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */
[1] = SCA_FILENAME, /* filename */ }, },
{ .name = "fcntl", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */
[1] = SCA_STRARRAY, /* cmd */ },
......@@ -1023,7 +1034,8 @@ static struct syscall_fmt {
{ .name = "fstat", .errmsg = true, .alias = "newfstat",
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "fstatat", .errmsg = true, .alias = "newfstatat",
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* filename */ }, },
{ .name = "fstatfs", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "fsync", .errmsg = true,
......@@ -1040,6 +1052,10 @@ static struct syscall_fmt {
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "getitimer", .errmsg = true, STRARRAY(0, which, itimers), },
{ .name = "getrlimit", .errmsg = true, STRARRAY(0, resource, rlimit_resources), },
{ .name = "getxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "inotify_add_watch", .errmsg = true,
.arg_scnprintf = { [1] = SCA_FILENAME, /* pathname */ }, },
{ .name = "ioctl", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */
#if defined(__i386__) || defined(__x86_64__)
......@@ -1054,18 +1070,33 @@ static struct syscall_fmt {
#endif
{ .name = "kill", .errmsg = true,
.arg_scnprintf = { [1] = SCA_SIGNUM, /* sig */ }, },
{ .name = "lchown", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "lgetxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "linkat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, },
{ .name = "listxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "lseek", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */
[2] = SCA_STRARRAY, /* whence */ },
.arg_parm = { [2] = &strarray__whences, /* whence */ }, },
{ .name = "lsetxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "lstat", .errmsg = true, .alias = "newlstat", },
{ .name = "lsxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "madvise", .errmsg = true,
.arg_scnprintf = { [0] = SCA_HEX, /* start */
[2] = SCA_MADV_BHV, /* behavior */ }, },
{ .name = "mkdir", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "mkdirat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */
[1] = SCA_FILENAME, /* pathname */ }, },
{ .name = "mknod", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "mknodat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* fd */ }, },
{ .name = "mlock", .errmsg = true,
......@@ -1091,7 +1122,8 @@ static struct syscall_fmt {
{ .name = "name_to_handle_at", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
{ .name = "newfstatat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* filename */ }, },
{ .name = "open", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */
[1] = SCA_OPEN_FLAGS, /* flags */ }, },
......@@ -1100,6 +1132,7 @@ static struct syscall_fmt {
[2] = SCA_OPEN_FLAGS, /* flags */ }, },
{ .name = "openat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* filename */
[2] = SCA_OPEN_FLAGS, /* flags */ }, },
{ .name = "perf_event_open", .errmsg = true,
.arg_scnprintf = { [1] = SCA_INT, /* pid */
......@@ -1121,8 +1154,11 @@ static struct syscall_fmt {
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "read", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "readlink", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* path */ }, },
{ .name = "readlinkat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* pathname */ }, },
{ .name = "readv", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "recvfrom", .errmsg = true,
......@@ -1131,8 +1167,12 @@ static struct syscall_fmt {
.arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
{ .name = "recvmsg", .errmsg = true,
.arg_scnprintf = { [2] = SCA_MSG_FLAGS, /* flags */ }, },
{ .name = "removexattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "renameat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
{ .name = "rmdir", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "rt_sigaction", .errmsg = true,
.arg_scnprintf = { [0] = SCA_SIGNUM, /* sig */ }, },
{ .name = "rt_sigprocmask", .errmsg = true, STRARRAY(0, how, sighow), },
......@@ -1149,6 +1189,8 @@ static struct syscall_fmt {
.arg_scnprintf = { [3] = SCA_MSG_FLAGS, /* flags */ }, },
{ .name = "setitimer", .errmsg = true, STRARRAY(0, which, itimers), },
{ .name = "setrlimit", .errmsg = true, STRARRAY(0, resource, rlimit_resources), },
{ .name = "setxattr", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "shutdown", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "socket", .errmsg = true,
......@@ -1160,17 +1202,31 @@ static struct syscall_fmt {
[1] = SCA_SK_TYPE, /* type */ },
.arg_parm = { [0] = &strarray__socket_families, /* family */ }, },
{ .name = "stat", .errmsg = true, .alias = "newstat", },
{ .name = "statfs", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* pathname */ }, },
{ .name = "swapoff", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* specialfile */ }, },
{ .name = "swapon", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* specialfile */ }, },
{ .name = "symlinkat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
{ .name = "tgkill", .errmsg = true,
.arg_scnprintf = { [2] = SCA_SIGNUM, /* sig */ }, },
{ .name = "tkill", .errmsg = true,
.arg_scnprintf = { [1] = SCA_SIGNUM, /* sig */ }, },
{ .name = "truncate", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* path */ }, },
{ .name = "uname", .errmsg = true, .alias = "newuname", },
{ .name = "unlinkat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dfd */
[1] = SCA_FILENAME, /* pathname */ }, },
{ .name = "utime", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "utimensat", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FDAT, /* dirfd */ }, },
.arg_scnprintf = { [0] = SCA_FDAT, /* dirfd */
[1] = SCA_FILENAME, /* filename */ }, },
{ .name = "utimes", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FILENAME, /* filename */ }, },
{ .name = "write", .errmsg = true,
.arg_scnprintf = { [0] = SCA_FD, /* fd */ }, },
{ .name = "writev", .errmsg = true,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册