USB: gadget: Add USB controller driver for MSM SoC

MSM SoC has chipidea USB controller. So use ci13xxx_udc core.
This driver depends on transceiver driver for clock control,
PHY initialization, VBUS detection.  Register for notify_event
callback to perform MSM specific quirks after controller is reset
and stopped.
Signed-off-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -531,6 +531,27 @@ config USB_EG20T
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_CI13XXX_MSM
+	boolean "MIPS USB CI13xxx for MSM"
+	depends on ARCH_MSM
+	select USB_GADGET_DUALSPEED
+	select USB_MSM_OTG_72K
+	help
+	  MSM SoC has chipidea USB controller.  This driver uses
+	  ci13xxx_udc core.
+	  This driver depends on OTG driver for PHY initialization,
+	  clock management, powering up VBUS, and power management.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "ci13xxx_msm" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_CI13XXX_MSM
+	tristate
+	depends on USB_GADGET_CI13XXX_MSM
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 #
 # LAST -- dummy/emulated controller
 #

drivers/usb/gadget/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
+obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 
 #
 # USB gadget drivers

drivers/usb/gadget/ci13xxx_msm.c

+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/msm_hsusb_hw.h>
+#include <linux/usb/ulpi.h>
+
+#include "ci13xxx_udc.c"
+
+#define MSM_USB_BASE	(udc->regs)
+
+static irqreturn_t msm_udc_irq(int irq, void *data)
+{
+	return udc_irq();
+}
+
+static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+{
+	struct device *dev = udc->gadget.dev.parent;
+	int val;
+
+	switch (event) {
+	case CI13XXX_CONTROLLER_RESET_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n");
+		writel(0, USB_AHBBURST);
+		writel(0, USB_AHBMODE);
+		break;
+	case CI13XXX_CONTROLLER_STOPPED_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n");
+		/*
+		 * Put the transceiver in non-driving mode. Otherwise host
+		 * may not detect soft-disconnection.
+		 */
+		val = otg_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+		otg_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		break;
+	default:
+		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		break;
+	}
+}
+
+static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
+	.name			= "ci13xxx_msm",
+	.flags			= CI13XXX_REGS_SHARED |
+				  CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+
+	.notify_event		= ci13xxx_msm_notify_event,
+};
+
+static int ci13xxx_msm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *regs;
+	int irq;
+	int ret;
+
+	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		return -ENXIO;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "udc_probe failed\n");
+		goto iounmap;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "IRQ not found\n");
+		ret = -ENXIO;
+		goto udc_remove;
+	}
+
+	ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		goto udc_remove;
+	}
+
+	return 0;
+
+udc_remove:
+	udc_remove();
+iounmap:
+	iounmap(regs);
+
+	return ret;
+}
+
+static struct platform_driver ci13xxx_msm_driver = {
+	.probe = ci13xxx_msm_probe,
+	.driver = { .name = "msm_hsusb", },
+};
+
+static int __init ci13xxx_msm_init(void)
+{
+	return platform_driver_register(&ci13xxx_msm_driver);
+}
+module_init(ci13xxx_msm_init);

drivers/usb/gadget/gadget_chips.h

@@ -148,6 +148,12 @@
 #define	gadget_is_pch(g)	0
 #endif
 
+#ifdef CONFIG_USB_GADGET_CI13XXX_MSM
+#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
+#else
+#define gadget_is_ci13xxx_msm(g)	0
+#endif
+
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
  * @gadget: the controller being driven
@@ -207,6 +213,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x26;
 	else if (gadget_is_pch(gadget))
 		return 0x27;
+	else if (gadget_is_ci13xxx_msm(gadget))
+		return 0x28;
 	return -ENOENT;
 }