提交 334bed08 编写于 作者: B Binoy Jayan 提交者: Greg Kroah-Hartman

staging: wilc1000: Replace semaphore txq_add_to_head_cs with mutex

The semaphore 'txq_add_to_head_cs' is a simple mutex, so it should be
written as one. Semaphores are going away in the future. Also, removing
the timeout scenario as the error handling code does not propagate the
timeout properly.
Signed-off-by: NBinoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 b27a6d5e
......@@ -20,7 +20,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/mutex.h>
#include <linux/semaphore.h>
#include <linux/completion.h>
......@@ -679,7 +679,7 @@ static int wlan_init_locks(struct net_device *dev)
mutex_init(&wl->rxq_cs);
spin_lock_init(&wl->txq_spinlock);
sema_init(&wl->txq_add_to_head_cs, 1);
mutex_init(&wl->txq_add_to_head_cs);
init_completion(&wl->txq_event);
......
......@@ -43,6 +43,7 @@
#include "wilc_wlan.h"
#include <linux/wireless.h>
#include <linux/completion.h>
#include <linux/mutex.h>
#define FLOW_CONTROL_LOWER_THRESHOLD 128
#define FLOW_CONTROL_UPPER_THRESHOLD 256
......@@ -171,7 +172,7 @@ struct wilc {
struct wilc_vif *vif[NUM_CONCURRENT_IFC];
u8 open_ifcs;
struct semaphore txq_add_to_head_cs;
struct mutex txq_add_to_head_cs;
spinlock_t txq_spinlock;
struct mutex rxq_cs;
......
......@@ -99,9 +99,7 @@ static int wilc_wlan_txq_add_to_head(struct wilc_vif *vif,
unsigned long flags;
struct wilc *wilc = vif->wilc;
if (wilc_lock_timeout(wilc, &wilc->txq_add_to_head_cs,
CFG_PKTS_TIMEOUT))
return -1;
mutex_lock(&wilc->txq_add_to_head_cs);
spin_lock_irqsave(&wilc->txq_spinlock, flags);
......@@ -119,7 +117,7 @@ static int wilc_wlan_txq_add_to_head(struct wilc_vif *vif,
wilc->txq_entries += 1;
spin_unlock_irqrestore(&wilc->txq_spinlock, flags);
up(&wilc->txq_add_to_head_cs);
mutex_unlock(&wilc->txq_add_to_head_cs);
complete(&wilc->txq_event);
return 0;
......@@ -573,8 +571,7 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
if (wilc->quit)
break;
wilc_lock_timeout(wilc, &wilc->txq_add_to_head_cs,
CFG_PKTS_TIMEOUT);
mutex_lock(&wilc->txq_add_to_head_cs);
wilc_wlan_txq_filter_dup_tcp_ack(dev);
tqe = wilc_wlan_txq_get_first(wilc);
i = 0;
......@@ -755,7 +752,7 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
if (ret != 1)
break;
} while (0);
up(&wilc->txq_add_to_head_cs);
mutex_unlock(&wilc->txq_add_to_head_cs);
wilc->txq_exit = 1;
*txq_count = wilc->txq_entries;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册