piix: tuneproc() fixes/cleanups

Fix/cleanup the driver's tuneproc() and ratemask() methods:

- PPE, IE, and TIME bits need to be cleared beforehand for the slave drive as
  well as master (Alan probably just forgot about it);

- this driver only supports PIO modes up to 4, so must pass the correct limit
  to ide_get_best_pio_mode();

- use min_t() macro instead of min();

- simplify slave vs master drive evaluation;

- do come coding and formatting cleanups...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/piix.c

 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.45	May 12, 2006
+ *  linux/drivers/ide/pci/piix.c	Version 0.46	December 3, 2006
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -163,7 +163,7 @@ static u8 piix_ratemask (ide_drive_t *drive)
 	 *	if the drive cannot see an 80pin cable.
 	 */
 	if (!eighty_ninty_three(drive))
-		mode = min(mode, (u8)1);
+		mode = min_t(u8, mode, 1);
 	return mode;
 }
 
@@ -216,7 +216,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
-	int is_slave		= (&hwif->drives[1] == drive);
+	int is_slave		= drive->dn & 1;
 	int master_port		= hwif->channel ? 0x42 : 0x40;
 	int slave_port		= 0x44;
 	unsigned long flags;
@@ -225,7 +225,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 	static DEFINE_SPINLOCK(tune_lock);
 	int control = 0;
 
-				 /* ISP  RTC */
+				     /* ISP  RTC */
 	static const u8 timings[][2]= {
 					{ 0, 0 },
 					{ 0, 0 },
@@ -233,7 +233,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 
 	/*
 	 * Master vs slave is synchronized above us but the slave register is
@@ -243,25 +243,24 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 	spin_lock_irqsave(&tune_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 
-	if (pio >= 2)
+	if (pio > 1)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio >= 3)
+	if (pio > 2)
 		control |= 2;	/* IORDY */
 	if (is_slave) {
-		master_data = master_data | 0x4000;
+		master_data |=  0x4000;
+		master_data &= ~0x0070;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
 			master_data = master_data | (control << 4);
-		} else {
-			master_data &= ~0x0070;
 		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
 		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
 		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
 	} else {
-		master_data = master_data & 0xccf8;
+		master_data &= ~0x3307;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
 			master_data = master_data | control;